Turns your PC or Macintosh into a precision data recorder No programming required - plug and play installation Powerful on-line and off-line analysis Continuous recording up to 100 000 samples/s Independently selectable input ranges ±20 mV to ±1 0 V Bipolar output for pulse and waveform generation Trigger input TTL or contact closure The e-corder 210 is a high performance two channel data recording and analysis system. It records analog signals from a wide variety of transducers and instruments, as well as from eDAQ Amps and Pods. It features two programmable differentia input amplifiers and can record 16 bit resolution data directly to your PC at speeds of up to 1 00 000 samples/s via the com- puter USB interface. A built-in software controlled analog out- put, provides basic pulse and waveform generation. The e-corder is ideal for the recording and analysis of experi- mental signals in physical science applications. Absolutely no programming is required and the powerful on-line and off-line analysis functions allow results to be quickly extracted from the recorded data. The system can be used to replace paper based chart recorders and data acquisition cards in applications such as Electrochemistry, Kinetics, Chromatography, Acoustics, Optics, Materials Testing, Engineering, and Thermal Analysis. Computer System Compatibility e-corder is compatible with the following computers: Windows 2000, XP or Vista. Systems with a minimum of MacOS X or later. Systems with minimum 128 MB RAM and Analog output Indicator Trigger, Input channels, BNC connectors Input channels, Auxiliary ground, Power 4 mm terminal post requirements Power on/off Power socket Chart™ and Scope™ software is shipped with every e-corder for both Windows and Macintosh. Chart™ - lets you use you computer as a multichannel strip chart recorder, polygraph and digital voltmeter. Scope™ - lets you use your computer as a two-channel storage oscilloscope, orXY plotter. Specialist software and analysis extensions are also available for use with e-corder units. Main Chart window (Windows XP). All software has a user friendly interface and does not require additional programing to develop applications.

WARRANTY: eDAQ Hardware units are supported by a one year warranty E-mail: [email protected] e-corder is a registered trademark of eDAQ Pty Ltd. All other trademarks are the property of their respective owners