Catalogs >
Ecotech >
VOC1000

VOC1000
1Pages

Catalog excerpts

environmental monitoring solutions Flame Ionisation detector Oxidizes Non methane gases 0-200 ppm (0-1000 ppm optional) +/- 1% full scale +/- 1% of full scale (24 hours) Detector: Oxidizer: Range: repeatability: drift: The Ecotech VOC1000 is designed to measure total, methane and non-methane hydrocarbon gases providing accurate and reliable measurement data. The VOC1000 analyser provides unparalleled flexibility and offers continuous, fully automated gas analysis over a broad range of concentrations. The analyzer is based on a flame ionization detector (FID) with electronic control that delivers a small portion of the sample gas to the detector flame. During the combustion process, organic or hydrocarbon-based gases in the sample are ionized then they are detected by the instrument and reported as a concentration. BENEFiTS • Flame ionization detector. support gases: Hydrogen 35 cc/min Air 175 cc/min • Hydrocarbon detection from sub-ppm to 1000ppm (Methane). Electrical: • Automatic calibration at user-defined intervals. display: • Electronic control of fuel, air and sample. • Electronic back-pressure regulator with sample bypass system ensures fast response. • Programmable analog output ranges. • Automatic FID ignition, with automatic shut-off of sample, fuel and combustion air. • Graphical display and easy to use menu system. Relay outputs: 5 programmable form A relays rated to 3A @ 230 VAC Outputs: 1 programmable 0-20 or 4-20mA isolated output (optional 3 analog output board) digital outputs: RS232, Ethernet 48.3 x 36.2 x 13.3 cm (WxDxH) 9 kg 1/4” tube fitting connectors Ecotech Pty Ltd T (Australia) 1300 364 946 T (international) +61 3 9730 7800 E info@ecotech.com W www.ecotech.com

Open the catalog to page 1

VOC1000
1Pages

Catalog excerpts

All Ecotech catalogs and technical brochures

Archived catalogs

VOC1000 1Pages

Catalog excerpts

All Ecotech catalogs and technical brochures

Archived catalogs

VOC1000
1Pages