1. Catalogs
  2. Ecosafe S.A.
  3. EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS

EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS

EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS
1 / 18 PagesView full catalog

EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS

Product catalog summary
Introduction
Flammable or explosive products must be stored in safety cabinets to mitigate explosion risks during a fire, applicable across all sectors and flammability levels.
European Norms
  • EN 14470-1: Effective since October 2004, this norm pertains to storing flammable products in laboratories, specifically for cabinets with an internal volume of 1m3 or less.
  • EN 14470-2: Effective since April 2006, this norm addresses the storage of gas cylinders in laboratories, focusing on cabinets with a total internal volume for gas cylinders up to 220 liters.
Main Requirements
  • Fire Protection: Cabinets must prevent contents from contributing to fire risks for at least 15 minutes.
  • Fire Test: Cabinets must pass fire tests according to EN 14770-1 or EN 14470-2, conducted by an accredited laboratory.
  • Spill Containment Sump: A sump with a minimum capacity of 10% of the total stored volume or 110% of the largest container is required.
  • Construction: Cabinets must have self-closing doors and consistent wall thickness, with fire resistance as per ISO 834-1 and EN 1363-1.
  • Marking and Labeling: Cabinets must have standardized pictograms and labels according to ISO 3864.
  • Ventilation: Cabinets must have air inlets and outlets with a thermo-fuse to seal the system in case of fire, ensuring at least 10 air changes per hour.
Fire Resistance Types
Cabinets are classified by fire resistance duration: 15, 30, 60, or 90 minutes, with specific types for flammable liquids and gas cylinders.
Conformity and Advantages
  • Tested and approved according to EN 14470-1 and EN 1363-1 norms.
  • Fire resistance up to 105 minutes, tested by an independent laboratory.
  • Double wall construction with thermal insulation to prevent thermal bridges.
  • Active security features include air inlet/outlet channels, thermo-fuse seals, and self-closing doors.
Options
Cabinets are available with different door color options and additional features like cooling systems and extractable drawers.
Conformity and Standards
The cabinets are tested and approved according to EN 14470-1 (04/2004) and EN 1363-1 (06/2000) standards. They feature normalized labeling in compliance with ISO 3864 and the 92/58/CEE European directive.
Advantages
The cabinets offer fire resistance for 60 to 90 minutes, depending on the model, following the ISO 834 fire heating curve. They are tested and approved by an independent European laboratory.
Passive Security Features
The cabinets have a double-wall construction with an outer housing made of sheet steel and an inner body of melamine-based wood. Thermal insulation panels prevent thermal bridges. They include a base trough at the bottom and standardized markings.
Active Security Features
The cabinets are equipped with air inlet and outlet channels for ventilation, which can be sealed off automatically in case of fire by a thermo-fuse. The doors have thermo-expanding seals to maintain fireproof integrity and are self-closing with a fuse link that activates at 50°C.
Options and Customization
Doors are available in different colors, and various accessories such as retention shelves, base troughs, and perforated cover plates are available for customization.
Product Range and Specifications
The document lists various models of cabinets with specifications including dimensions, weight, and storage capacity. Models are available for different applications such as under-bench, working cover, and tall cabinets.
Additional Features
Some models include features for the recovery of waste, with systems for liquid waste management and electronic level sensors for monitoring. The document also recommends installing an exhausting system to improve safety and cabinet lifespan.
Manufacturer's Note
The manufacturer reserves the right to modify technical characteristics without notice.
See more

Catalog excerpts

EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS-2

Flammable cabinets Corrosive cabinets EN 14470-1 SAFETY CABINETS FOR FLAMMABLE AND EXPLOSIVE PRODUCTS EN 14470-2 SAFETY CABINETS FOR GAS CYLINDERS Toxic cabinets and multirisk INTRODUCTION For security reasons you have to store your flammable or explosive products in a safety cabinet. No matter your business branch or the degree of flammability of your products, they have to be stored in case of fire in order to delay the risk of explosion. Pesticide range Scope EN 14470-1: The new European norm came into effect in October 2004 and concerns the storage of flammable products in laboratories. It also...

 Open the catalog to page 2
EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS-3

Flammable cabinets Corrosive cabinets  Sensors in a flammable cabinet CHOOSE YOUR SAFETY CABINET ACCORDING TO YOUR ACTIVITY AND TO THE LEVEL OF PROTECTION YOU NEED RECOMMENDED SAFETY CABINETS LITTLE FLAMMABLE OIL OF TURPENTINE, WHITE SPIRIT EASILY FLAMMABLE ETHANOL, METHANOL EXTREMELY FLAMMABLE ACETONE, ETHER Flash point: Lowest temperature at which a liquid could form gas/air mixtures, able to burn with an ignition source. Please check our brochure Safety cabinets for flammables. (3) Not appropriate for Germany and Austria. (2) IN THIS PART OF THE CATALOG YOU WILL FIND: EN 14470-1 Safety cabinets...

 Open the catalog to page 3
EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS-4

EN 14470-1 EN 1363-1 EN 14470-1 SAFETY CABINETS TYPE 105 MINUTES FOR FLAMMABLES PRODUCTS Normalized Label Self-closing door(s) with thermo-fuse Retention Shelf Vent with Thermo-fuse Removable base trough Showers and firstaid equipments Anti-fire equipments and Files cabinets ACTIVE SECURITY - Tested and approved according to EN 14470-1 (04/2004) and EN 1363-1 (06/2000). - Normalized labelling according to ISO 3864 and EN 14470-1 (04/2004) norms, and 92/58/CEE european directive. - Air inlet and outlet channel in rear panel. Easy connection on the roof of the cabinet Ø 100 mm (labelled as exhaust...

 Open the catalog to page 4
EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS-5

Toxic cabinets and multirisk Pesticide range Anti-fire equipments and Files cabinets Showers and firstaid equipments The manufacturer keeps the right to modify technical characteristics without notice. 12/2013 Fume hoods, filtering cabinets - Ventilation Corrosive cabinets Flammable cabinets N.B.: In compliance with the EN 14470-1 norm and for the extraction of toxic vapours generated inside your cabinet, an exhausting system is required. In all cases, before storing chemical products in multirisk cabinets, each user must contact his safety manager and his chemical products supplier. Please, check...

 Open the catalog to page 5
EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS-6

N.B.: In compliance with the EN 14470-1 norm and for the extraction of toxic vapours generated inside your cabinet, an exhausting system is required. In all cases, before storing chemical products in multirisk cabinets, each user must contact his safety manager and his chemical products supplier. Please, check our documentation about exhausting systems.

 Open the catalog to page 6
EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS-7

Flammable cabinets Toxic cabinets and multirisk Corrosive cabinets Cabinet without equipment under-bench 1 Cabinet without equipment under-bench 2 Cabinet without equipment under-bench 2 Cabinet without equipment working cover 1 Cabinet without equipment working cover 2 Cabinet without equipment working cover 2 Cabinet without equipment tall 1 Cabinet without equipment tall 2 Cabinet without equipment tall 2 Retention shelf for 1 door cabinet - W: 635 – D: 615 mm Retention shelf for 2 doors cabinet - W: 1135 – D: 615 mm Retention shelf for 2 doors cabinet - W: 900 – D:615 mm Base trough for 1...

 Open the catalog to page 7
EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS-8

EN 14470-1 MULTIRISK CABINETS – 105 MINUTES Retention shelf Self-closing door(s) with thermo-fuse Normalized Label Removable base Trough ACTIVE SECURITY - Tested and approved according to EN 14470-1 (04/2004) and EN 1363-1 (06/2000). - Normalized labelling according to ISO 3864 and EN 14470-1 (04/2004) norms, and 92/58/CEE european directive. - Fire resistance during 90 minutes (approved Type 90) in accordance with ISO 834 fire heating curve. - Tested and approved by an independent European laboratory. - Possibility to separate the dangerous products families. - Air inlet and outlet channel in...

 Open the catalog to page 8
EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS-9

N.B.: In compliance with the EN 14470-1 norm and for the extraction of toxic vapours generated inside your cabinet, an exhausting system is required. In all cases, before storing chemical products in multirisk cabinets, each user must contact his safety manager and his chemical products supplier. Please, check our documentation about exhausting systems.

 Open the catalog to page 9
EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS-10

EN 14470-1 EN 1363-1 EN 14470-1 SAFETY CABINETS TYPE 60 MINUTES - FOR FLAMMABLE PRODUCTS Toxic cabinets and multirisk Corrosive cabinets Flammable cabinets Self-closing door(s) with thermo-fuse Normalized Label Vent with Thermo-fuse Removable base Trough ACTIVE SECURITY - Tested and approved according to EN 14470-1 (04/2004) and EN 1363-1 (06/2000). - Normalized labelling according to ISO 3864 and EN 14470-1 (04/2004) norms, and 92/58/CEE european directive. - Fire resistance during 60 minutes (approved Type 60) in accordance with ISO 834 fire heating curve. - Tested and approved by an independent...

 Open the catalog to page 10
EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS-11

Toxic cabinets and multirisk Corrosive cabinets Flammable cabinets Cabinet without equipment under-bench 1 Cabinet without equipment under-bench 2 Cabinet without equipment under-bench 2 Cabinet without equipment working cover 1 Cabinet without equipment working cover 2 Cabinet without equipment working cover 2 Cabinet without equipment tall 1 Cabinet without equipment tall 2 Cabinet without equipment tall 2 Retention shelf for 1 door cabinet - W: 635 – D: 615 mm Retention shelf for 2 doors cabinet - W: 1135 – D: 615 mm Retention shelf for 2 doors cabinet - W: 900 – D:615 mm Base trough for 1...

 Open the catalog to page 11
EN 14470-1 & EN 14470-2 SAFETY CABINETS FOR FLAMMABLES AND EXPLOSIVE PRODUCTS, AND GAS CYLINDERS-12

Pedestal area under-d riveable - Tested and approved according to EN 14470-1 (04/2004) and - Normalized labelling according to ISO 3864 and EN 14470-1 (04/2004) norms,and 92/58/CEE european directive . - Fire resistance during 30 or 15 minutes in accordance with ISO 834 fire heating curve. - Pedestal area under-driveable by a forklift by removing panel. - Built in H.P.L. (high pressure laminated): high chemicals resis- - Body in grey colouring (RAL 7035), edges in yellow colouring - Earthing link. - Retention shelves. - Removable base trough at the bottom. /aCTDWi SiCMTY - Air inlet and outlet...

 Open the catalog to page 12
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.