ECONOX CarboProbe CP (%O2 potters)
ECONOX CarboProbe CP (%O2 potters)
The document introduces the CP probe, a simple and cost-effective oxygen probe designed for potters and ceramic furnace users. It is particularly suitable for controlling both gas and wood-fired kilns.
- Cost-effective and reliable option.
- Simple design with easy-to-read digital display for oxidation/reduction.
- High-performance, low-cost sensors available in 300mm and 400mm lengths, with custom lengths on request.
- Utilizes ZRO2 zirconia oxygen sensor, a global standard for oxidation and reduction control.
- Easy installation and operation with no maintenance required for hundreds of hours if handled carefully.
- Safe to use, producing less energy than a battery.
- Fast response time of less than 1.0 second.
The CP probe assists potters in achieving the right temperature, oxidation/reduction levels, and minimizing fuel consumption. It allows for:
- Temperature monitoring in kilns.
- Oxidation/reduction measurement.
- Fuel monitoring in the flame.
- Fuel savings by optimizing oxygen supply and reducing energy waste.
- Consistent and reliable glaze colors by maintaining the correct reduction levels.
- Reduced air pollution by guiding wood-fired kiln operations to minimize wood consumption and reduce ash and smoke.
Catalog excerpts
econox SWI5S QUALHY SINCE 1984 Q Measuring & control systems Carbon & Oxygen Simple, low-cost potters' probe The CP probe is a very simple, low cost oxygen probe with an easy-to-read digital meter displaying oxidation/reduction. It is designed especially for potters or ceramic furnaces users. This probe is ideal to control both gas and wood-fired kilns. KEY FEATURES • Cost effective and a highly reliable option • Simplest oxygen probe on the market • High performance, low cost sensors • Available in length of 300mm and 400mm (other length on request) • Based on the ZRO2 zirconia oxygen sensor. This all-ceramic sensor is the world-wide standard for controlling oxidation and reduction • Easy to install and easy to read oxidising/reduction values • No maintenance on part for hundreds of hours of work (if handled carefully) • No safety hazard - the maximum a probe can produce is less than a battery! • Response time < 1.0 second Certified management system | ISO 9001 | ISO 14001 | OHSAS 18001 ECONOX | Rue de I'eglise 25 | 2942 Alle | Switzerland | www.econox.ch | www.econox.com
Open the catalog to page 1
econox SWI5S QUALHY SINCE 1984 Q Measuring & control systems Carbon & Oxygen Use of oxygen probes in pottery kilns As a potter, you need • The right temperature • The right oxidation/reduction • The least possible fuel consumption. The CarboPorbe CP lets you check • The temperature in the kiln • The oxidation/reduction • The fuel in the flame The advantages of measurement of oxidation/reduction include: • Fuel savings - an economical firing depends on supplying enough oxygen, without waste of energy from heating excess air. • Reliable glaze colours - Knowing the right level of reduction every...
Open the catalog to page 2All ECONOX catalogs and technical brochures
Econox FULL DOCUMENTATION24 Pages
CarboProbe ZS Pro (%C)2 Pages
