The ECONOX CarboProbeTM ZS Pro probe was developed for very difficult working conditions. It is based on the new ZrO2 C3M electrolyte and offers excellent accuracy for the measurement of carbon potential (%C) and temperature (°C) The CarboProbeTM ZS Pro allows a very precise value of oxygen concentration in an industrial furnace to be obtained. The zirconia carbon sensor has been used for nearly three decades to control the carbon potential in many carburizing applications. Patented design for more security in your working area Swiss quality, gold coated LEMO electrical connector Designed for difficult working condition Based on the brand new ZrO2 C3M electrolyte Ideal for use in carburizing, carbonitriding, neutral hardening and gas generator applications. Every probe is 100% tested with certification, certificates are enclosed with each probe. Response time < 1.0 second High reliability of the probe thanks to a simple and effective concept Interchangeable with all oxygen probes or carbon sensors. Reduces stress on the 4-bore tube, reducing incidents of breakages. Can also be supplied with an outer protective ceramic (see picture). Low investment resulting in an important improvement of heat treatment ___________________________________________________________________________ CERTIFIED MANAGEMENT SYSTEM | ISO 9001 | ISO 14001 | OHSAS 18001 ECONOX | Rue de l’église 25 | 2942 Alle | Switzerland | www.e

Output Readout impedance Accuracy Response time Thermocouple Operating Temperature Mechanical shock Thermal shock Available length (mm) Reference air Cleaning air econox SWISS QUALITY SINCE 1984 Q Measuring & control systems Carbon & Oxygen 0 to 1200 mV % Carbon sensors should be used with controlling, recording and indicating instruments having input impedance of 10 megohms or higher. ±0.05 weight percent carbon in normal operating range Less than 1.0 second Type K, S, N or without 600°C to 1150°C Resist mild mechanical shock. Handle carefully Please place into hot furnace or remove from hot...