Versa Elite Series Gas & Air Pressure Switches Series “E” DMG [Direct mounting with O-Ring Gas] FGC [Flange Center mounting Gas] FSG [Flange Side mounting Gas] FCA [Flange Center mounting Air] Antunes Controls’ new line of Half-Size Gas and Air Pressure Switches monitor pressure and make or break the electrical control circuit when pressure drops below or rises above the desired set point. The pressure settings are easy to read and adjust. All models are available in automatic reset operation only. The switches are sturdy and constructed with a durable plastic electrical enclosure and a die-cast aluminium inlet base. Approval : CE - 0085 BR 0021 TECHNICAL DATA Housing Electrical ratings Electrical connection 3 pin connector for line sockets – DIN – EN 175 301-803 [without ground Ambient temperature Max. operating : 690 mbar pressure Surge pressure FEATURES Compact Design Accurate Adjustable Set points Diaphragm actuated safety limit switch Ventless removable transparent adjustment knob cover Directly mountable to integrated gas valve trains. Pressure test point incorporated in the Ø 9 mm metal body

SWFTCH CONTACTS TEST PORT NOTE: Dimensions are for reference only. Switching Function

INSTALLATION AND OPERATING INSTRUCTIONS WARNING PLEASE READ THE OPERATING INSTRUCTIONS BEFORE USE! THIS EQUIPMENT MUST BE INSTALLED ACCORDING PRESCRIPTIONS IN FORCE! Installation must be carried out exclusively by skilled and authorized service technicians. Before installing the pressure switch, make sure that the pipeline is free from impurities and vibration-free. Pressure switches should be installed onto support pipeline with R ¼ external thread. The sealing material must be applied to the external thread of the pipeline only and not to the internal thread of the switch. Use sealants suitable...