Technical information 115 and 230VAC Fig. 7907 type Duty cycle according to IEC 60034-1 S4 Valve top flange connection according to ISO 5211 Electric actuators | for ball and butterfly valves on valves. Valves and actuators can be modified according to customer specifications and be equipped with options such as valve positioners, limit switches, pilot valves and more. Five pressure test benches allow testing of valves upto DN1200/48”. The applicable standards are API598 and EN12266 * ELA40 is a muli-voltage actuator and can be connected to a power supply of 24VDC or 95-245VAC. The actuator has a 24VDC motor. Operating time in s/90° at maximum torque * Duty cycle according to IEC 60034-1 S4 Valve top flange connection according to ISO 5211 The Valve Automation Centre has a state of the art workshop in which well trained technicians mount pneumatic, hydraulic and electric actuators and any other customer specified protocols can additionally be performed. Valve Automation Centre Working out customer-specific requirements. Product development support. • Providing 2D and 3D assembly drawings. • Supplying 3D CAD models. • * The exact operating time for 24VDC actuators depends on the effective load. Options Explosion proof enclosure Eexd II B T4 | ELA 80 up to 3000 Water tight enclosure according to IP68 - 10m/72h | ELA 80 up to 3000 Potentiometer unit (0~1kΩ) | ELA 80up to 3000 Proportional control unit for modulating applications (input, output 0~10V DC, 4~20mA DC) | ELA 60 up to 3000 CAN-open and Profibus fieldbus | ELA 60 up to 3000 Additional torque switches (SPDT 2x 250VAC - 10A) | ELA150 up to 3000 Position transmitter (output 4~20mA) | ELA 60 up to 3000 Angle extender up to 120°, 180° of 270° | ELA 80 up to 1200 Fail safe battery | ELA 80 up to 300 Power supply | 380VAC and 440VAC 3Ph (excl. ELA40) Fire proof execution 1050 ±5°C / 50min | ELA80 - ELA3000 and depending the situation Fire proof execution 250 ±5°C / 150min | ELA80 - ELA3000 and depending the situation Workshops Modern workshops of more than 5000m2. Facilitating of large and complex projects. Automating and modifying of valves. • Mounting, adjusting and modifying according to customer-specific requirements. Testing Large test facilities. Pressure testing of valves up to DN1200/48”. • Maximum test pressure 1200bar. • • Largest stockist of valves and actuators in Europe. [email protected] www.eriks.nl [email protected] www.econosto.nl [email protected] www.eriks.be United Kingdom [email protected] www.econosto.be [email protected] www.eriks.fr [email protected] www.eriks.co.uk

Electric actuators | for ball and butterfly valves In industrial and maritime environments electric actuators must be suitable to operate in the most challenging conditions. Therefore the Econ Fig. 7907 ELA actuator has a robust design and can be mounted on all ball valves, butterfly valves, damper ® Standard equipped with visual position indicator and diagonal square valve stem set stepless and very precise by a reliable clamping Weather proof IP67 enclosure, NEMA 4 and 6 Equipped with a manual override. The types ELA80 up Actuator can be direct mounted on the valve to 3000 even have an automatic...