*mydirectindustry

T300

Product catalog summary

Overview: The document describes a patented process for shredding and sterilizing infectious waste using saturated steam. The system is fully enclosed, automated, and made of stainless steel, eliminating the need for intermediate waste handling. It is approved by the Higher Council of Public Health of France.

Process Description: Contaminated waste is loaded into an upper chamber where it is shredded into small pieces. The shredded material then drops into a lower treatment chamber. The waste and machine parts are steam heated to 138°C (280°F) and pressurized to 3.5 bar (51 psi) for sterilization. The process is automated and monitored, with a computerized control system recording essential sterilizing parameters.

Cycle Details: The average cycle time is 30 minutes, and the process is capable of sterilizing waste with a microbial inactivation level of 10⁸. The waste volume is reduced by up to 80%, and the final product is safe for recycling or disposal as ordinary waste.

Capacity and Standards: The system has a process volume capacity of 350 liters per cycle. It complies with relevant standards and is engineered for healthcare and environmental applications.

General Characteristics: The dimensions of the system are 270 x 210 x 330 cm (9.8 x 6.8 x 10.83 ft), with a shipping weight of 2,000 kg. The maximum weight when filled with water for a hydraulic test is 3,100 kg. The system operates with a steam pressure of 8 bar and a maximum steam flow of 170 kg/h.

Operating Characteristics: The average waste density is 100 - 150 kg/m³, with a process weight capacity of 35 - 53 kg per cycle (77 - 117 lb per cycle). Consumption per cycle includes 15 kg of steam, 1.7 kWh of electricity, and 25 liters of water.

Contact Information: The document provides contact details for further inquiries, including an address in Roubaix, France, and contact numbers.

Catalog excerpts

- Process volume capacity 350 L per cycle. STAAT NDARD Our patented process is designed to shred and sterilize infectious waste by saturated steam. Shredding and sterilization are achieved in one fully enclosed and automated, stainless steel, system with no intermediate waste handling. The contaminated waste is loaded into the upper chamber where a heavy-duty shredder reduces the waste into small pieces. Using gravity, the processed material drops into the lower treatment chamber. After shredding, waste and all the inner parts of the machine are steam heated to 138°C (280 F) and pressurized to 3,5 bar (51 psi). Sterilization is achieved by maintaining a temperature of 138°C (280 F) at the core of the waste for 10 minutes. After the cooling process, the ﬁnal product is safe to recycle or to dispose as ordinary waste. Waste are both sterilized (Microbial inactivation = 108) and volumereduced by up to 80 %. The 30 minutes duration of an average cycle process is fully automated and totally monitored. A computerized control system scans the process and automatically prints and records on a memory card a batch report at the end of each cycle with the essential sterilizing parameters for accurate record keeping. Approved by the Higher Council of Public Health of France under the direction of the Ministry of Health and the Ministry of the Environmen

Open the catalog to page 1

- Process volume capacity 350 L per cycle General Characteristics Dimensions (L x W x H) Shipping Weight Max weight when filled with water For a special hydraulic test Stress Steam Pressure Max Steam Flow Compressed Air Electricity 380 V / 3-Phase Operating Characteristics Average Cycle Time Process Volume Capacity Average Waste Density Average Process Weight Capacity Microbial Inactivation Waste Volume Reduction 28 rue Sebastopol 59100 ROUBAIX - FRANCE [email protected] www.ecodas.com ECODAS ENGINEERED SOLUTIONS FOR HEALTHCARE & THE ENVIRONMENT

Open the catalog to page 2

T300

T300

Catalog excerpts

All ECODAS catalogs and technical brochures