- Catalogs
- ECKOLD technics GmbH & Co. KG
- ECKOLD Portable clinching pliers MZD 25/3 PH
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
ECKOLD Portable clinching pliers MZD 25/3 PH
ECKOLD Portable clinching pliers MZD 25/3 PH
- Inlet Pressure: 5 - 16 bar
- Dimensions (L/W/H): 330 / 197 / 477 mm
- Weight: 18 kg
- Compressed Air: Max 6 bar
- Pressure Force: Max 30 kN at 500 bar
- Air Consumption: 15 l per stroke
- Cycle Time: Approx. 2 seconds
- Net Weight with Hose: 6 kg
- Drive: Pneumohydraulic
- Working Stroke: Pressure dependent
- Max Total Thickness: 3.0 mm for steel and aluminium with specific properties
- Throat Dimensions: Horizontal 25/35 mm, Vertical 2 x 15 mm
- Gap: 6 mm
- Width in Working Area: 50 mm
- Punches and Dies: Torsion-proof, suitable for multiple layer connections, clinching with partial cutting
- Single Layer Thickness: Min 0.5 mm
- Recommended Dies: SMD 721.XX for general use, SMD 731.XX for softer materials like aluminium or copper
- Holding Forces: Vary based on material and thickness, with guide values provided for steel and aluminium
Catalog excerpts
Mobile Clinchzange Portable clinching pliers MZD 25/3 PH
Open the catalog to page 1
• Handlich, robuste Ausfuhrung • Fugerichtung (Stempel- und Matrizenposition) ist wechselbar Portable clinching pliers MZD 25/3 PH • Handy, sturdy design • One-hand operating device • Joining direction (punch and die position) are changeable Parameter / Parameters Druckubersetzer / Pressure booster PHD-001 Eingangsdruck / Inlet pressure Lange/Breite/Hohe / Length/width/heigth Gewicht / Weight Eckold - Mobile Clinchzange / Portable clinching pliers MZD 25/3 PH
Open the catalog to page 2
Stempel und Matrizen: S-DF • Verdrehsicher und geeignet für mehrlagige Verbindungen • Clinchen mit Schneidanteil • Einzelfügeteildicke min. 0,5 mm Die Spreizmatrize SMD 721.XX ist für viele Anwendungen geeignet. Zum Clinchen von weicheren Werkstoffen wie Aluminium oder Kupfer ist die SMD 731.XX zu empfehlen. Weitere Matrizen auf Anfrage. Punches and dies: S-DF • Torsion-proof and suitable for multiple layer connections • Clinching with partial cutting • Single layer thickness min. 0.5 mm Clinchvariante S-DF Clinching type S-DF The die SMD 721.XX is suitable for many applications. For clinching...
Open the catalog to page 3
Parameter / Parameters Hubfrequenz / Stroke frequency Einzelhub / single stroke Druckkraft / Pressure force Antrieb / Drive Luftverbrauch / Air consumption Arbeitshub / Working stroke druckabhängig / pressure dependent Gesamtfügeteildicke / total thickness Stahl / steel (Rm = 440 N/mm²) Aluminium (Rm = 250 N/mm²) Taktzeit Fügeprozess / Cycle time joining process Ausladung horizontal / Throat, horizontal Ausladung vertikal / Throat, vertical Breite im Arbeitsbereich / Width in working area Länge/Breite/Höhe / Length/width/heigth Nettogewicht / Net weight mit Schlauch / with hose *Max. Gesamtfügeteildicke...
Open the catalog to page 4All ECKOLD technics GmbH & Co. KG catalogs and technical brochures
ECKOLD Glätthammer GL 24 Pages
ECKOLD Handformer HF 100 PA12 Pages
ECKOLD Handformer HF 10012 Pages
ECKOLD Seamclosing technique12 Pages
ECKOLD Handzange HZ 524 Pages
KF 170 PD Brochure en20 Pages
ECKOLD English wheeling6 Pages
ECKOLD Kraftformer KF 470 Medium20 Pages
ECKOLD Kraftformer KF 675 Magnum20 Pages
KF 800 Brochure en20 Pages
KF 324 Brochure en20 Pages
KF 340 Brochure en20 Pages
Handformer/Kraftformer20 Pages
ECKOLD punching machine8 Pages
ECKOLD clinching technique12 Pages
ECKOLD Technologies12 Pages
MZD 25/3 PH4 Pages
- Punching center
- ECKOLD forming machine
- Automatic punching center
- Metal forming machine
- Hole punch punching machine
- Riveting center
- ECKOLD flanging machine
- Automatic forming machine
- Insertion machine
- Forming punching machine
- Tool set
- Profile punching machine
- Hydraulic forming machine
- ECKOLD sheet metal flanging machine
- Servo-driven punching press
- Embossing unit
- Automatic insertion machine
- Cold forming machine
- Precision forming machine
- Electric riveting machine