EIPC3 EIPC5 EIPC6 INTERNAL GEAR PUMPS • new Generation EIPC new technology • up to 320 bar • industrial version • aluminium housing • noise-optimized • multi-flow-pumps with common suction port HYDRAULIC DIVISION

Internal gear pump Type EIPC3 for industrial applications with constant displacement volume Characteristics • nternal gear pump with axial and radial gap I compensation • Radial compensation with segments • Suction and pressure port radial • ield of application: Industrial hydraulic F • Low noise • Long time life • Low pulsation (pressure pulsation ~ 2 %) • Multi flow combinations Technical Data: Rated Size NG Continuous operating pressure [bar]** Peak operating pressure [bar] max. 10 sec 15 % duty cycle 320 300 280 280 Cut-in pressure peak [bar]** Max. speed [min ] -1 Operating medium Max. admission...

Internal gear pump Type EIPC5 for industrial applications with constant displacement volume Characteristics • nternal gear pump with axial and radial gap I compensation • Radial compensation with segments • Suction and pressure port radial • ield of application: Industrial hydraulic F • Low noise • Long time life • Low pulsation (pressure pulsation ~ 2 %) • Multi flow combinations Technical Data: Rated Size NG Continuous operating pressure [bar]** Peak operating pressure [bar] max. 10 sec 15 % duty cycle Cut-in pressure peak [bar]** Operating medium Max. admission pressure (intake side) [bar]...

Internal gear pump Type EIPC6 for industrial applications with constant displacement volume Characteristics • nternal gear pump with axial and radial gap I compensation • Radial compensation with segments • Suction and pressure port radial • ield of application: Industrial hydraulic F • Low noise • Long time life • Low pulsation (pressure pulsation ~ 2 %) • Multi flow combinations Technical Data: Rated Size NG Continuous operating pressure [bar]** Peak operating pressure [bar] max. 10 sec 15 % duty cycle Cut-in pressure peak [bar]** Operating medium Max. admission pressure (intake side) [bar]...

Pump with SAE-2-B-hole flange and cylindrical shaft Order example: EIPC3-_ _ _RA23-1X direction of rotation Pump with SAE-2-B-hole flange and spline shaft suction port Order example: EIPC3-_ _ _RB23-1X direction of rotation suction port

Pump with SAE-B-2-hole flange and cylindrical shaft Pressure connections see single pump suction port

Double Pump with SAE-B-2-hole flange and cylindrical shaft Order example: EIPC3-_ _ _RK20-1X+ EIPH2-_ _ _RP30-1X direction of rotation shaft end common suction port

Pump with SAE-C-2-hole flange and zylindrical shaft Order example: EIPC5-_ _ _RA23-1X direction of rotation suction port * Pressure port: SAE J518, high pressure series (code 62) ** Suction port: SAE J518, standard pressure series (code 61) Pump with SAE-C-2-hole flange and spline shaft Order example: EIPC5-_ _ _RB23-1X direction of rotation gearing ANSI B92.1-1996 12/24 DP30° 14T suction port * Pressure port: SAE J518, high pressure series (code 62) ** Suction port: SAE J518, standard pressure series (code 61)

Pump with SAE-D-2-hole flange and zylindrical shaft Order example: EIPC6-_ _ _RA23-1X direction of rotation suction port * Pressure port: SAE J518, high pressure series (code 62) ** Suction port: SAE J518, standard pressure series (code 61) Pump with SAE-D-2-hole flange and spline shaft Order example: EIPC6-_ _ _RB23-1X direction of rotation suction port * Pressure port: SAE J518, high pressure series (code 62) ** Suction port: SAE J518, standard pressure series (code 61)

SAE flange metric tapped SAE pipe threaded flange

Connecting flanges SAE for Double Pump EIPC3 SAE Pressure- and Suction flange SAE J518C, ISO 6162 Type EIPC3-020-032 EIPC3-040-064 Suction flange for Intermediate housing Inlet Type EIPC3/3 bis NG0321 1/2‘‘ EIPC3/3 ab NG040 2‘‘ • = available

Ordering Code EIP C3-032 RK23 -1X SXXX Special version number (not applicable with standard pumps or when the type key is unambiguous) Revision code 1st number: Change of mounting dimensions 2nd number: Change of pump with same mounting dimensions Intake and delivery connection 3: SAE-flange connections 0: suction port closed; common inlet – other flanges on request – Fastening flange 2: SAE/B 2-hole flange, centre-Ø 101.6 / at EIPC3 2: SAE/C 2-hole flange, centre-Ø 127 / at EIPC5 2: SAE/D 2-hole flange, centre-Ø 152,4 / at EIPC6 3: Direkt fixture 5: VDMA on demand – other flanges on request...