LED control gear, 700 mA max. 390 W output, non SELV Supply : Output: Efficiency : THD : Standards: Protections: Design : Dimensions : Fixture : Temperature : Lifetime : 0,96 @ 400 VAC lout: 700 mA constant current / non-SELV Uo: Max. 700 V open Circuit voltage > 95 % @ 230 V50Hz100 % load > 96 % @ 400 V50Hz100 % load l<9%, U<3 % @ 230 VAC /50Hz/100 % load l<11%,U<3%@ 400 VAC /50Hz/100 % load EN 55015 / RI Suppression EN 61547 / Burst immunity: 4 kV / Surge immunity: 4 kV line-earth, 2 kV line-line EN 61347/Safety EN 61000-3-2 / Harmonics No-Ioad Short-circuit Temperature Undervoltage / Derating of output-current / lout = -10 % @ 200 VAC LB / metal housing 360x40x40 mm(LxWxH) Hole spacing 353 mm Wire cross section: 0,5... 1,5 mm2 Wiring guidelines: Separate mains and LED-wires; Keep LED-wires as short as possible. No secondary Switching. Take care of polarity on LED-side to prevent damage. The driver is only to be used as a built-in device. Take care to diselectric withstand of LED-Module to Earth - the driver is “non SELV”. Connect housing to Earth. Connection diagram : Drawing not to scale Product number: 7703000097 eckerle Eckerle Technologies GmbH D 76316 Malsch, Otto-Eckerle-Str. 12a