Durable and high-quality technology

Control gears by Eckerle: Hard-wearing and high-quality technology – Made in Germany Eckerle's portfolio comprises a wide range of electronic controllers, including LED controllers, ballasts for fluorescent lamps and UV applications, as well as electronic lighting control. • ard-wearing and high-quality technology – Made in Germany – with a unit service life of H more than 100,000 hours under extreme conditions. • Our development and production under one roof guarantees absolute flexibility. • 00 ... 305 V far-reach applications for emergency lighting, input voltage ranges from 1 12 ... 60 V...

LED lighting for general lighting, e.g. workplace lighting in the office, lab or production facility With a power range of max. 30 W, this constant voltage driver offers the ideal operating conditions and thus a maximum lifespan for your LED applications Technical data Special feature: temperature monitoring in standby < 1W Dimensions [L x W x H in mm] Input voltage [V] Output voltage [V] Output current [mA] Operating mode Dimming range [%] Temperature range [°C] Protective circuit no-load protection, short-circuit protection Emergency light constant current Protection class Protection class...

Usage Description LED lighting for industry e.g. machinery, workplace With a power range of max. 100W this constant current lighting in the office, lab or production facility. driver with a wide input range offers the ideal operating conditions and thus a maximum lifespan for your LED applications. Technische Daten

dimmable via DALI interface LED lighting for industry, e.g. in sports facilities and factories With a power range of max. 245 W, this constant current driver offers the ideal operating conditions and thus a maximum lifespan for your LED applications Technical data Special feature: dimming without PWM, temperature monitoring in standby < 1W Dimensions [L x W x H in mm] Input voltage [V] Output voltage [V] Output current [mA] Operating mode Dimming range [%] Temperature range [°C] Protection class Protection class SELV Assembly Burst voltage [kV] Shock resistance [kV] Efficiency [%] Residual ripple...

Electronic lighting control Intelligently controlled light – the steady introduction of LED into all areas of lighting technology has led to extensive changes in lighting control. What was still driven by phase dimmers or analogue 1...10 V interfaces in years past is today digitally connected with the building’s nervous system. The standardised interface for controlling photometric devices is DALI (Digital Addressable Lighting Interface). Originally designed for dimming fluorescent lamps, the system has developed into an all-rounder for lighting schemes. The triumph of LED technology has also...

Lighting Control DALI converter with 1 – 10 V output and switching function With the addressable DALI implementer with 1 – 10 V output and switching function for bidirectional communication between the DALI converter and DALI controller, a maximum of 40 electronic ballast units can be controlled with 1 - 10 V Technical data Special feature: SELV separation, suitable for DC supply Dimensions [L x W x H in mm] Input voltage [V] Protection class Emergency light Lighting control Protection class fixing holes 1 – 10 V isolator for SELV applications The isolator is positioned between the 1 - 10 V interface...

Electronic control gears for fluorescent lamps Eckerle offers the perfect solutions for a whole host of applications in different designs - both in constant current mode and constant voltage mode. There are many different types of control gear - small and compact, with and without housing, or customised. The product information listed below provides you with an initial overview. It only represents a small selection of our entire product portfolio. If you have specific requirements, our sales team would be happy to advise you! Eckerle always has the perfect solution to suit your needs. Description...

Usage Description Operation of low-pressure discharge lamps in public Compact ballast unit for 2 x 8 W - T16 buildings, offices and factories Technical data Special feature: compact design, wide-range device

Electronic Control Gear Operation of low-pressure discharge lamps in public buildings, offices and factories Linear ballast unit up to a max. of 15 W -TC-EL, TCDEL, TC-TEL, TC-DD and T16/T26 Technical data Special feature: compact design, wide-range device Dimensions [L x W x H in mm] Input voltage [V] Protection class fixing holes Electronic Control Gear Protective circuit no-load protection, short-circuit protection, switch-off in the event of a defective lamp Emergency light Lamp type Protection class Operation of low-pressure discharge lamps in public buildings, offices and factories Linear...

Electronic Control Gear Operation of low-pressure discharge lamps in public buildings, offices and factories Compact ballast unit for 18 W – TC-DEL/TEL Technical data Special feature: compact design Dimensions [L x W x H in mm] Input voltage [V] Dimming range (%) Temperature range [°C] Certification Assembly Burst voltage [kV] Protective circuit no-load protection, short-circuit protection, switch-off in the event of a defective lamp Emergency light Lamp type Protection class Protection class Electronic Control Gear Operation of low-pressure discharge lamps in public buildings, offices and factories....

Electronic Control Gear Technical lights for the operation of UV lamps Durable control gear for your UV solution Technical data Special feature: compact design Dimensions [L x W x H in mm] Input voltage [V] Dimming range (%) Electronic Control Gear Emergency light Protection class no-load protection, short-circuit protection, switch-off in the event of a defective lamp Lamp type Protection class Protective circuit fixing holes Technical lights for the operation of UV lamps Durable control gear for your UV solution Technical data Special feature: compact design Dimensions [L x W x H in mm] Input...