[HYDRAULIK- PNEUMATIK] Rotary actuator E3 ... for the mobile application The rotary actuator E3 is as specially constructed for the mobile application. This engine goes after the gear principle and needs, in case of its compact construction, a small place. The Eckart E3 finds in almost all sectors its application. Automotive engineering, building - and civil engineering, tool machines and so on. For example staging: If the rotary actuator is the beaaring for the complete bearing pressure and the rotating mechanism integrated. Therefore the working platform must not be mounted separately. Furthermore has the rotary actuator a hole, where tubes or cables can put through. In case of safety regulations reasons can there be put through a screw with the screws will be the plates from the brackets or from the working platform extra fixed. Even by a damage of the rotary actuator, for example in axial direction can the working platform not be detached. That even by a sideways action of the working platform in each between position, a waggle of the platform not happens, will be for first the turning threads free from backlash, second the ball bearing free from backlash build in, and thirdly there will be not used any both-way compact seals. Furthermore Eckart offers valve block, which can be mounted with hollow screws on to the pressure connection holes. The valve has furthermore the following functions: • Loading hold function if the working platform wants to lower in case of diagonally position. • Clamp function ihat the working platform does not shake by any holding position. • Overpressure function t hat overpressure, is it in case of the hydraulic system or in case of temperature range, does not destroy the actuator.

Eckart E3 – your advantages at one view ● ultra compact, robust construction ● exact, almost free from backlash positioning ● no leckage in the inside, in case of that double shaft- and pistonsealing (lip seal) ● hydraulic seals concerning the newest stand of technic ● any intermediate angle possible ● high bearing charge ØE ØA one- or both-way attachment of the load possible the torque is the same in both directions all parts are out of high strength steels continuous shaft hole flange thread in metric or inch possible non-standard options on request Size (piston-Ø) torque at 210 bar particularly...