HTV M10 - HTV M10Z

Product catalog summary

Overview: The HTV M10 and HTV M10Z are Vickers hardness testers designed for precise measurement of material hardness. They utilize a load cell control system to enhance accuracy and repeatability, displaying test force, indentation length, and hardness value directly on the screen. An optional CCD image automatic measuring system can be integrated.

Applications: These testers are suitable for a wide range of materials including ferrous and non-ferrous metals, IC thin sections, coatings, ceramics, and more.

Standards: The testers comply with ISO 6507, ASTM E92, and JIS Z2244 standards.

Specifications:

Test force control: Load cell closed loop with electronic control.
Main loads: 0.3kgf to 10kgf.
Dwell time: 0 to 60 seconds.
Hardness scales: HV0.3 to HV30.
Resolution: 0.1HV.
Turret type: Manual for HTV M10, Automatic for HTV M10Z.
Microscope: 10x eyepiece, 20x objective, with a minimum measuring unit of 0.5μm.
Display: 3” LCD showing hardness value, test force, and other parameters.
Power supply: 230V, 50Hz with a power consumption of 500W.

Performance: The testers offer a hardness test range from 1HV to 2967HV with a repeatability as specified in Table 1. The test cycle is semi-automatic, with manual focus and measurement, and automatic loading, dwelling, and unloading.

Accessories: Standard accessories include a 10x reading microscope, objectives, a diamond Vickers indenter, and various test tables. Optional accessories include digital and specialized test tables, a CCD measuring system, and a workbench.

Environmental Conditions: The testers operate optimally at a temperature of 23±5 °C and relative humidity of ≤65%.

Contact Information: DEVCO S.r.l., Via Marzabotto, 59 20037 Paderno Dugnano (MI), Tel +39 0283591153, Fax +39 0295441300, www.devcosrl.it, Email: [email protected]

Catalog excerpts

ec/feAB Data Sheet

Open the catalog to page 1

Vickers hardness testers ec/feAI HTV M10 HTV M10Z Vickers Hardness tester Vickers Hardness Tester adopts load cell control system, improves the accuracy of the test force and the repeatability of the indicating value. Directly shows the test force, indentation length, dwell time, test numbers, conversion scale, after measuring input the diagonal of the indentation and the system automatically detect hardness value shown on the screen. It can be equipped with CCD image automatic measuring system. Application Suitable for ferrous metal, non-ferrous metals, 1C thin sections, coatings, ply-metals,...

Open the catalog to page 2