*mydirectindustry

Catalogs
echoENG
PP 63/2500

PP 63/2500

1 / 3 PagesView full catalog

PP 63/2500

Product catalog summary

Description

The hydraulic press brake is constructed as a single welded frame, machined in one operation using a CNC machining center.
Hydraulic cylinders are crafted from solid steel billets, precisely honed for accuracy.
Pistons are made from steel forgings, hardened, chrome-plated, precision-ground, and micropolished.
Features a compact hydraulic block with pressure relief valves for enhanced safety.
Incorporates a torsion bar and stooper system within the cylinders for parallel movement of the top beam and precise bending angles.
Pre-fill valves allow rapid approach and return of the top beam.
A pressure switch limits bending force and triggers automatic return of the top beam to the top dead center.
Equipped with high-pressure, silent Rexroth hydraulic pumps.

Standard Accessories

Motorized cylinder stopper control system.
Motorized rigid backgauge (X axis) system with ball screw and special guiding system requiring minimal lubrication.
Two adjustable front support arms with height adjustment slots and front stop.
Adjustable backgauge system for longitudinal (Z axis) and vertical (R axis) positioning.
Backgauge positioning fingers with depth adjustment tolerance of +/- 0.05 mm for precise parallelism.
Backgauge fingers with two gauging steps for different bending depths, featuring a fold-up design.
Display and push buttons for backgauge and cylinder stopper positioning.
T slots on both sides of the table.
PLC electrical system and swinging control panel.
One-piece top and bottom tool (not hardened).
Ram stroke switches for mute point and top dead center.
Metric or inch measuring system selection.

Technical Specifications

Parameter	Value
Capacity	630 kN
Bending Length	2500 mm
Between Columns	2000 mm
Throat Depth	250 mm
Slide Stroke	100 mm
Stroke Adjustment	80 mm
Max. Shut Height	340 mm
Strokes per Minute	10 min^-1
Main Motor Power	5.5 kW
Electrical Supply	400 V/50 Hz, 3 PH
Overall Dimensions	2680×1540x2200 mm
Weight	4540 kg

Catalog excerpts

PP 63/2500 Hydraulic press brake DESCRIPTION • The whole body is designed and built as a welded one piece frame and machined at one time on a moving column CNC machining centre • Hydraulic cylinders are machined from a solid steel billet and honed precisely • Pistons steel forgings, hardened, chrome plated, precision ground and micropolished • Compact hydraulic block with pressure relief valves for safety • The torsion bar and stooper system inside cylinders enable parallel move of the top beam and accurate bend angle at both ends of the work piece • Pre-fill valves enable top beam to approch the work piece rapidly, and return rapidly after bending • Pressure switch limits bending force during bending and activate automatic return of top beam to top dead centre • High pressure and silent Rexroth hydraulic pumps

Open the catalog to page 1

STANDARD ACCESSORIES • Motorized cylinder stopper control system • Motorized rigid backgauge (X axis) system with ball screw and special design guiding system with minimized lubrication • Two laterally adjustable front support arms with slot for height adjustment and slot front stop. • Longitudinal (Z axis) and vertical (R axis) adjustable of backgauge system • Backgauge positioning fingers move along linear slideways and has depth adjustament facility of +/-0,05 mm. tolerance for exact parallelism • Backgauge fingers with two gauging steps used one for short and the other for long bending depths. Fingers...

Open the catalog to page 2

All EchoENG catalogs and technical brochures

Archived catalogs

MA TD TRT3
2 Pages
MA TD 0035
2 Pages
FVO 160 VE
2 Pages
FU 130
2 Pages
CL 850
2 Pages