ES1-AG1-200-01 All Gas Sensor

Product catalog summary

Technical Specifications
The ES1-AG1-200 All Gas Sensor features a sensitivity of 55 nA/ppm ± 15 nA/ppm, a zero current of ± 100nA, and a range of 0-200ppm. It can handle a maximum overload of 1000ppm and has a resolution of 0.1ppm with a 16Bit ADC. The response time is T50 < 10s and T90 < 30s, with a repeatability of 1% and linear output.

Applications
This sensor is suitable for industrial safety, leakage detection, gas manufacturing process monitoring, emission monitoring, sewage/water treatment plants, biogas, garbage disposal, food industry, indoor air quality, garages, and medical & health care.

Features
The sensor detects a wide variety of gases with high selectivity, has a long lifetime of over 3 years, no-poisoning, fast response time, low power consumption, linear output, no zero line drift, and a wide temperature range of -40°C to +55°C. It is RoHS compliant and has excellent sensitivity at low temperatures.

Lifetime and Housing
The sensor has a long-term drift of less than 1% per month, an expected lifetime of over 3 years, and a zero drift in clean air of less than 1 ppm. It has a storage life of 12 months and a warranty of 12 months. The housing material is PPO, and it weighs less than 0.7g.

Operation
The sensor operates on an amperometric, 3-electrode principle with a bias voltage of 0 mV and a recommended load resistor of 100 Ω. The warm-up time is less than 60 seconds.

Environmental Conditions
It operates within a temperature range of -40 to +55℃, a humidity range of 15-95 %RH (non-condensing), and a pressure range of 800 to 1200 hPa. The optimal storage temperature is 4 to 6℃.

Cross Sensitivity
The sensor shows varying responses to different gases, with positive readings expected for some gases like carbon monoxide and formaldehyde, and no expected readings for others like methane and carbon dioxide.

Disclaimer and Warning
The datasheet includes a disclaimer about the accuracy of the performance data and a warning about the proper handling and disposal of the sensor. Users are advised to avoid cleaning the sensors with strong solvents and to follow local electronic waste recycling regulations.

Contact Information
EC Sense GmbH in Germany and Ningbo AQSystems Technology Co., Ltd. in China are the business centers for Europe, the rest of the world, and Asia respectively.

Catalog excerpts

Solid Polymer Electrochemical Gas Sensing Technology ES1-AG1-200-01 All Gas Sensor Datasheet Easy Gas Sensor Solutions

Open the catalog to page 1

ES1-AG1-200 All Gas Technical Specifications Performance Sensitivity Zero Current Part Number Maximum Overload Response Time Features Detects with high selectivity a wide variety of gases Long Lifetime > 3 years No-Poisoning Typical warm-up time in seconds Fast Response Time nA power consumption Linear Output No Zero Line Drift Better Signal to Noise Ratio Wide Temperature Range of-40°C to +55°C Excellent Sensitivity at low Temperatures No Leakage Small Size RoHS compliant Typical Applications Industrial Safety Leakage Detection Gas Manufacturing Process Monitoring Emission Monitoring Sewage/Water...

Open the catalog to page 2

Test Concentration Sensor Reading Carbon Dioxide Carbon Monoxide Chlorine Dioxide Sulfur Dioxide Dimethyl Disulfide Gasoline Volatilization Dining Lampblack Hydrocarbons (unsaturated) * Positive Reading Expected ** Negative Reading Expected Note: 1) The above interference factors may vary due to different sensors and service life, please refer to the actual test results. 2) This table is not complete for all cross gases. Please contact us for other gases. 3) The above parameters are the test results at a temperature of 25°C, a relative humidity of 50%RH and a normal pressure environment. The...

Open the catalog to page 3

Temperature Curve Disclaimer The EC Sense performance data stated above is based on data obtained under test conditions using the EC Sense gas distribution system and AQS test software. In the interest of continuous product improvement, EC Sense reserves the right to change design features and specifications without notice. We are not responsible for any loss, injury or damage caused by this. EC Sense assumes no responsibility for any indirect loss, injury or damage resulting from the use of this document, the information contained therein or any omissions or errors herein. This document does...

Open the catalog to page 4

Business Centre Europe and the rest of the world Business Centre Asia EC Sense GmbH Wangener Weg 3 82069 Hohenschäftlarn, Germany Tel: +49(0)8178-99992-10 Fax: +49(0)8178-99992-11 Email: [email protected] www.ecsense.com, www.ecnose.de Ningbo AQSystems Technology Co., Ltd. F4-17 Building, Zhong Wu Technology Park No.228, Jin Gu Bei Road, Yinzhou District NingBo, Zhejiang Provence, P.R. China Post Code: 315100 Tel: +86(0)574 88097236, 88096372 Email: [email protected] www.ecsense.cn, www.ecnose.de

Open the catalog to page 5

ES1-AG1-200-01 All Gas Sensor

ES1-AG1-200-01 All Gas Sensor

Catalog excerpts

All EC Sense GmbH catalogs and technical brochures