1. Catalogs
  2. EC Sense GmbH
  3. ES1-AG1-1000-01 All Gas Sensor

ES1-AG1-1000-01 All Gas Sensor

ES1-AG1-1000-01 All Gas Sensor

ES1-AG1-1000-01 All Gas Sensor

Product catalog summary
Technical Specifications
The ES1-AG1-1000 All Gas Sensor utilizes solid polymer electrochemical gas sensing technology. It offers a sensitivity of 35 nA/ppm ± 15 nA/ppm, with a zero current of ± 100nA. The sensor operates within a range of 0-1000ppm and can handle a maximum overload of 2000ppm. It features a resolution of 0.1ppm with a response time of T50 < 10s and T90 < 30s. The sensor is linear with a repeatability of 1%.
Applications and Features
This sensor is suitable for industrial safety, leakage detection, gas manufacturing process monitoring, emission monitoring, and indoor air quality. Key features include high selectivity for various gases, a long lifetime of over 3 years, no-poisoning, fast response time, low power consumption, and a wide operating temperature range from -40°C to +55°C.
Lifetime and Housing
The sensor has a long-term drift of less than 1% per month and an expected lifetime of over 3 years. It has a zero drift in clean air of less than 1 ppm and a storage life of 12 months. The housing is made of PPO material and weighs less than 0.7g.
Operation and Environment
The sensor operates on an amperometric, 3-electrode principle with a bias voltage of 0 mV and a recommended load resistor of 100 Ω. It has a warm-up time of less than 60 seconds. The operating temperature range is -40 to +55℃, with a humidity range of 15-95 %RH, non-condensing, and a pressure range of 800 to 1200 hPa.
Cross Sensitivity
The sensor shows varying responses to different gases, with positive readings expected for gases like carbon monoxide and formaldehyde, and no expected readings for gases like methane and carbon dioxide.
Disclaimer and Warning
EC Sense provides performance data based on test conditions and reserves the right to change specifications without notice. Users must follow guidelines for storage, assembly, and operation to ensure proper use. The document does not constitute a sales offer and users must comply with local regulations for electronic waste disposal.
See more

Catalog excerpts

ES1-AG1-1000-01 All Gas Sensor-1

Solid Polymer Electrochemical Gas Sensing Technology ES1-AG1-1000-01 All Gas Sensor Datasheet Easy Gas Sensor Solutions

 Open the catalog to page 1
ES1-AG1-1000-01 All Gas Sensor-2

ES1-AG1-1000 All Gas Technical Specifications Performance Features Detects with high selectivity a wide variety of gases Long Lifetime > 3 years No-Poisoning Typical warm-up time in seconds Fast Response Time nA power consumption Linear Output No Zero Line Drift Better Signal to Noise Ratio Wide Temperature Range of-40°C to +55°C Excellent Sensitivity at low Temperatures No Leakage Small Size RoHS compliant Typical Applications Industrial Safety Leakage Detection Gas Manufacturing Process Monitoring Emission Monitoring Indoor Air Quality Zero Current Maximum Overload Response Time Environment...

 Open the catalog to page 2
ES1-AG1-1000-01 All Gas Sensor-3

Test Concentration Sensor Reading Carbon Dioxide Carbon Monoxide Chlorine Dioxide Sulfur Dioxide Dimethyl Disulfide Gasoline Volatilization Dining Lampblack Hydrocarbons (unsaturated) * Positive Reading Expected ** Negative Reading Expected Note: 1) The above interference factors may vary due to different sensors and service life, please refer to the actual test results. 2) This table is not complete for all cross gases. Please contact us for other gases. 3) The above parameters are the test results at a temperature of 25°C, a relative humidity of 50%RH and a normal pressure environment. The...

 Open the catalog to page 3
ES1-AG1-1000-01 All Gas Sensor-4

Temperature Curve Disclaimer The EC Sense performance data stated above is based on data obtained under test conditions using the EC Sense gas distribution system and AQS test software. In the interest of continuous product improvement, EC Sense reserves the right to change design features and specifications without notice. We are not responsible for any loss, injury or damage caused by this. EC Sense assumes no responsibility for any indirect loss, injury or damage resulting from the use of this document, the information contained therein or any omissions or errors herein. This document does...

 Open the catalog to page 4
ES1-AG1-1000-01 All Gas Sensor-5

Business Centre Europe and the rest of the world Business Centre Asia EC Sense GmbH Wangener Weg 3 82069 Hohenschäftlarn, Germany Tel: +49(0)8178-99992-10 Fax: +49(0)8178-99992-11 Email: [email protected] www.ecsense.com, www.ecnose.de Ningbo AQSystems Technology Co., Ltd. F4-17 Building, Zhong Wu Technology Park No.228, Jin Gu Bei Road, Yinzhou District NingBo, Zhejiang Provence, P.R. China Post Code: 315100 Tel: +86(0)574 88097236, 88096372 Email: [email protected] www.ecsense.cn, www.ecnose.de

 Open the catalog to page 5
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.