EC4-HF-10-01 Hydrogen Fluoride Gas Sensor

Product catalog summary

Technical Specifications
The EC4-HF-10-01 is an electrochemical 3-electrode sensor designed for detecting hydrogen fluoride gas. It is suitable for industrial safety, leakage detection, emission monitoring, and other applications. Key features include high selectivity, double-sealed housing, stable zero, linear output, high sensitivity, and low power consumption. It operates within a temperature range of -20°C to +55°C and is RoHS compliant.

Performance
The sensor has a sensitivity of -350 nA/ppm ± 100 nA/ppm, a zero current of ± 100nA, and a range of 0-10ppm with a maximum overload of 20ppm. It offers a resolution of less than 0.1 ppm and response times of T50 < 40s and T90 < 80s. The sensor is linear with a repeatability of 2%.

Operation
It operates on an amperometric principle with a bias voltage of 0 mV and a recommended load resistor of 100 Ω. The warm-up time is less than 60 seconds.

Environmental Conditions
The sensor functions in humidity ranges of 15-95% RH (non-condensing) and pressure ranges of 800 to 1200 hPa. The storage temperature is optimal between 4 to 6°C.

Lifetime and Warranty
The sensor has a long-term drift of less than 1% per month, an expected lifetime of over 2 years, and a storage life of 6 months. It comes with a 12-month warranty.

Cross Sensitivity
The sensor shows no response to methane and carbon dioxide but detects hydrogen fluoride accurately. It may show positive readings for fluorine and hydrogen bromide.

Disclaimer and Warning
EC Sense provides performance data based on test conditions and reserves the right to change specifications without notice. Users must follow guidelines for storage, assembly, and operation to ensure proper use. The warranty does not cover misuse or unauthorized applications. Proper disposal of electronic waste is advised.

Contact Information
EC Sense GmbH in Germany and Ningbo AQSystems Technology Co., Ltd. in China are the primary business centers for Europe, the rest of the world, and Asia respectively.

Catalog excerpts

EC4-HF-10-01 Hydrogen Fluoride Gas Sensor-1

Electrochemical 3-Electrode Sensor EC4-HF-10-01 Hydrogen Fluoride Gas Sensor Datasheet Easy Gas Sensor Solutions

Open the catalog to page 1

EC4-HF-10-01 Hydrogen Fluoride Gas Sensor-2

EC4-HF-10-01 Hydrogen Fluoride Gas Sensor Datasheet EC4-HF-10 Hydrogen Fluoride Gas Technical Specifications Performance Features Detects with high selectivity a wide variety of gases Double sealed housing for advanced leakage protection Stable zero Zero Current Maximum Overload Response Time Environment Operating Temperature Range High sensitivity Operating Humidity Range Operating Pressure Range Storage Temperature Linear output Wide operation temperature range of -20°C to +55°C Typical warm-up time in minutes RoHS compliant Typical Applications Industrial Safety Leakage Detection Operation...

Open the catalog to page 2

EC4-HF-10-01 Hydrogen Fluoride Gas Sensor-3

EC4-HF-10-01 Hydrogen Fluoride Gas Sensor Datasheet Test Concentration Sensor Reading Carbon Dioxide Hydrogen Fluoride Hydrogen Bromide *Positive Reading Expected Note: 1) The above interference factors may vary due to different sensors and service life, please refer to the actual test results. 2) This table is not complete for all cross gases. Please contact us for other gases. 3) The above parameters are the test results at a temperature of 25°C, a relative humidity of 50%RH and a normal pressure environment. The performance of the sensor varies under different environmental conditions. If...

Open the catalog to page 3

EC4-HF-10-01 Hydrogen Fluoride Gas Sensor-4

EC4-HF-10-01 Hydrogen Fluoride Gas Sensor Datasheet Disclaimer The EC Sense performance data stated above is based on data obtained under test conditions using the EC Sense gas distribution system and AQS test software. In the interest of continuous product improvement, EC Sense reserves the right to change design features and specifications without notice. We are not responsible for any loss, injury or damage caused by this. EC Sense assumes no responsibility for any indirect loss, injury or damage resulting from the use of this document, the information contained therein or any omissions or...

Open the catalog to page 4

EC4-HF-10-01 Hydrogen Fluoride Gas Sensor-5

Business Centre Europe and the rest of the world Business Centre Asia EC Sense GmbH Wangener Weg 3 82069 Hohenschäftlarn, Germany Tel: +49(0)8178-99992-10 Fax: +49(0)8178-99992-11 Email: [email protected] www.ecsense.com, www.ecnose.de Ningbo AQSystems Technology Co., Ltd. F4-17 Building, Zhong Wu Technology Park No.228, Jin Gu Bei Road, Yinzhou District NingBo, Zhejiang Provence, P.R. China Post Code: 315100 Tel: +86(0)574 88097236, 88096372 Email: [email protected] www.ecsense.cn, www.ecnose.de EC4-HF-10 Hydrogen Fluoride Gas Sensor_Datasheet_V1.1_20230607 Copyright@2023 EC Sense GmbH

Open the catalog to page 5

EC4-HF-10-01 Hydrogen Fluoride Gas Sensor

EC4-HF-10-01 Hydrogen Fluoride Gas Sensor

Catalog excerpts

All EC Sense GmbH catalogs and technical brochures