EC4-Cl2-50-01 Chlorine Gas Sensor

Product catalog summary

Technical Specifications
The EC4-Cl2-50-01 is an electrochemical 3-electrode chlorine gas sensor designed for industrial safety, leakage detection, emission monitoring, sewage/water treatment, semiconductor industry, and warehouse logistics monitoring. It features high selectivity, double-sealed housing for leakage protection, stable zero, linear output, high sensitivity, low power consumption, and a wide operating temperature range from -20°C to +40°C. It is RoHS compliant and has a typical warm-up time of less than 60 seconds.

Performance
The sensor has a sensitivity of -600 nA/ppm ± 200 nA/ppm, a zero current of ± 20nA, and a range of 0-50ppm with a maximum overload of 100ppm. It offers a resolution of less than 0.1 ppm and response times of T50 < 20s and T90 < 60s. The repeatability is 2% with linear output.

Operation
Operating on an amperometric principle with a bias voltage of 0 mV, it requires a recommended load resistor of 100 Ω. The sensor's warm-up time is less than 60 seconds.

Environmental Conditions
The sensor operates within a temperature range of -20 to +40℃, humidity range of 15-95 %RH (non-condensing), and pressure range of 800 to 1200 hPa. The storage temperature is optimal between 4 to 6℃.

Lifetime and Warranty
The sensor has a long-term drift of less than 1% per month, an expected lifetime of over 2 years, and a zero drift in clean air of less than 1 ppm. It has a storage life of 6 months and a warranty of 12 months.

Cross Sensitivity
The sensor shows positive readings for gases like Bromine, Chlorine Dioxide, Iodine, Nitrogen Dioxide, Ozone, and Fluorine, while showing no response to Methane and Carbon Dioxide. Sulfur Dioxide shows a negative reading.

Disclaimer and Warning
The datasheet includes a disclaimer about the accuracy of the performance data and a warning about the proper handling and disposal of the sensor. Users are advised to avoid cleaning with strong solvents and to follow local electronic waste recycling regulations.

Contact Information
EC Sense GmbH in Germany and Ningbo AQSystems Technology Co., Ltd. in China are the business centers for Europe, the rest of the world, and Asia respectively.

Catalog excerpts

Electrochemical 3-Electrode Sensor EC4-Cl2-50-01 Chlorine Gas Sensor Datasheet Easy Gas Sensor Solutions

Open the catalog to page 1

EC4-Cl 2 -50-01 Chlorine Gas Sensor Datasheet EC4-Cl2-50 Chlorine Gas Technical Specifications Performance Features Detects with high selectivity a wide variety of gases Double sealed housing for advanced leakage protection Stable zero Zero Current Maximum Overload Response Time Environment Operating Temperature Range High sensitivity Operating Humidity Range Operating Pressure Range Storage Temperature Linear output Wide operation temperature range of -20°C to +40°C Typical warm-up time in minutes RoHS compliant Typical Applications Industrial Safety Leakage Detection Operation Operating Principle...

Open the catalog to page 2

EC4-Cl 2 -50-01 Chlorine Gas Sensor Datasheet Test Concentration Sensor Reading Carbon Dioxide Chlorine Dioxide Nitrogen Dioxide Sulfur Dioxide *Positive Reading Expected **Negative Reading Expected Note: 1) The above interference factors may vary due to different sensors and service life, please refer to the actual test results. 2) This table is not complete for all cross gases. Please contact us for other gases. 3) The above parameters are the test results at a temperature of 25°C, a relative humidity of 50%RH and a normal pressure environment. The performance of the sensor varies under different...

Open the catalog to page 3

EC4-Cl 2 -50-01 Chlorine Gas Sensor Datasheet Disclaimer The EC Sense performance data stated above is based on data obtained under test conditions using the EC Sense gas distribution system and AQS test software. In the interest of continuous product improvement, EC Sense reserves the right to change design features and specifications without notice. We are not responsible for any loss, injury or damage caused by this. EC Sense assumes no responsibility for any indirect loss, injury or damage resulting from the use of this document, the information contained therein or any omissions or errors...

Open the catalog to page 4

Business Centre Europe and the rest of the world Business Centre Asia EC Sense GmbH Wangener Weg 3 82069 Hohenschäftlarn, Germany Tel: +49(0)8178-99992-10 Fax: +49(0)8178-99992-11 Email: [email protected] www.ecsense.com, www.ecnose.de Ningbo AQSystems Technology Co., Ltd. F4-17 Building, Zhong Wu Technology Park No.228, Jin Gu Bei Road, Yinzhou District NingBo, Zhejiang Provence, P.R. China Post Code: 315100 Tel: +86(0)574 88097236, 88096372 Email: [email protected] www.ecsense.cn, www.ecnose.de EC4-Cl2-50 Chlorine Gas Sensor_Datasheet_V1.1_20230607 Copyright@2023 EC Sense GmbH

Open the catalog to page 5

EC4-Cl2-50-01 Chlorine Gas Sensor

EC4-Cl2-50-01 Chlorine Gas Sensor

Catalog excerpts

All EC Sense GmbH catalogs and technical brochures