EC4-Br2-5-01 Bromine Gas Sensor

Product catalog summary

Technical Specifications
The EC4-Br2-5-01 Bromine Gas Sensor is an electrochemical 3-electrode sensor designed for industrial safety, leakage detection, emission monitoring, semiconductor industry, and warehouse logistics monitoring. It features high selectivity for various gases, a double-sealed housing for leakage protection, stable zero, linear output, high sensitivity, and low power consumption. It operates within a temperature range of -20°C to +40°C and is RoHS compliant.

Performance
The sensor has a sensitivity of -650 nA/ppm ± 200 nA/ppm, a zero current of ± 20nA, and a range of 0-5ppm with a maximum overload of 10ppm. It offers a resolution of less than 0.01 ppm and response times of T50 < 20s and T90 < 60s. The sensor is linear with a repeatability of 2%.

Operation
The sensor operates on an amperometric principle with a bias voltage of 0 mV and a recommended load resistor of 100 Ω. It has a warm-up time of less than 60 seconds.

Environmental Conditions
The sensor functions in an operating temperature range of -20 to +40℃, humidity range of 15-95 %RH (non-condensing), and pressure range of 800 to 1200 hPa. It should be stored at temperatures between 0 to 20℃, with an optimum range of 4 to 6℃.

Lifetime and Warranty
The sensor has a long-term drift of less than 1% per month, an expected lifetime of over 2 years, and a zero drift in clean air of less than 1 ppm. It has a storage life of 6 months and a warranty of 12 months.

Cross Sensitivity
The sensor shows a reading of 1 ppm for Bromine at a test concentration of 1 ppm, with no response to Methane and Carbon Dioxide. Positive readings are expected for Chlorine, Iodine, and Fluorine.

Disclaimer and Warning
The datasheet includes a disclaimer stating that performance data is based on test conditions and may change without notice. Users are advised to follow proper storage, assembly, and operation guidelines to ensure sensor reliability. The document also emphasizes the importance of electronic waste recycling.

Contact Information
EC Sense GmbH in Germany and Ningbo AQSystems Technology Co., Ltd. in China are the business centers for Europe, the rest of the world, and Asia, respectively.

Catalog excerpts

Electrochemical 3-Electrode Sensor EC4-Br2-5-01 Bromine Gas Sensor Datasheet Easy Gas Sensor Solutions

Open the catalog to page 1

EC4-Br 2 -5-01 Bromine Gas Sensor Datasheet EC4-Br2-5 Bromine Gas Technical Specifications Performance Features Detects with high selectivity a wide variety of gases Double sealed housing for advanced leakage protection Stable zero Zero Current Maximum Overload Response Time Environment Operating Temperature Range High sensitivity Operating Humidity Range Operating Pressure Range Storage Temperature Linear output Wide operation temperature range of -20°C to +40°C Typical warm-up time in minutes RoHS compliant Typical Applications Industrial Safety Leakage Detection Operation Operating Principle...

Open the catalog to page 2

EC4-Br 2 -5-01 Bromine Gas Sensor Datasheet Test Concentration Sensor Reading Carbon Dioxide *Positive Reading Expected Note: 1) The above interference factors may vary due to different sensors and service life, please refer to the actual test results. 2) This table is not complete for all cross gases. Please contact us for other gases. 3) The above parameters are the test results at a temperature of 25°C, a relative humidity of 50%RH and a normal pressure environment. The performance of the sensor varies under different environmental conditions. If you have any questions, please contact us....

Open the catalog to page 3

EC4-Br 2 -5-01 Bromine Gas Sensor Datasheet Disclaimer The EC Sense performance data stated above is based on data obtained under test conditions using the EC Sense gas distribution system and AQS test software. In the interest of continuous product improvement, EC Sense reserves the right to change design features and specifications without notice. We are not responsible for any loss, injury or damage caused by this. EC Sense assumes no responsibility for any indirect loss, injury or damage resulting from the use of this document, the information contained therein or any omissions or errors...

Open the catalog to page 4

Business Centre Europe and the rest of the world Business Centre Asia EC Sense GmbH Wangener Weg 3 82069 Hohenschäftlarn, Germany Tel: +49(0)8178-99992-10 Fax: +49(0)8178-99992-11 Email: [email protected] www.ecsense.com, www.ecnose.de Ningbo AQSystems Technology Co., Ltd. F4-17 Building, Zhong Wu Technology Park No.228, Jin Gu Bei Road, Yinzhou District NingBo, Zhejiang Provence, P.R. China Post Code: 315100 Tel: +86(0)574 88097236, 88096372 Email: [email protected] www.ecsense.cn, www.ecnose.de EC4-Br2-5 Bromine Gas Sensor_Datasheet_V1.1_20230607 Copyright@2023 EC Sense GmbH

Open the catalog to page 5

EC4-Br2-5-01 Bromine Gas Sensor

EC4-Br2-5-01 Bromine Gas Sensor

Catalog excerpts

All EC Sense GmbH catalogs and technical brochures