WATER/ AND WASTE WATER TECHNOLOGY
12Pages

{{requestButtons}}

Catalog excerpts

WATER/ AND WASTE WATER TECHNOLOGY - 1

WATER/ AND WASTE WATER TECHNOLOGY ValvesActuators ▪ Automation Technology

Open the catalog to page 1
WATER/ AND WASTE WATER TECHNOLOGY - 3

PROVEN FOR GENERATIONS SHUT-OFF AND CONTROL VALVES MADE BY EBRO IN THE WATER AND WASTE WATER TECHNOLOGY Applications in the water and wastewater technology require high demands on the components installed in the system. On the one hand, the careful handling of sensitive media -such as drinking water- is of primary importance. On the other hand, aggressive and abrasive media with solids -such as waste water and sewage sludge- place highest demands on the abrasion resistance of materials used. EBRO offers a wide range of valves and actuators for almost all applications, which are...

Open the catalog to page 3
WATER/ AND WASTE WATER TECHNOLOGY - 4

EBRO PRODUCTS | WATER TECHNOLOGY Z011-A Soft-seated shut-off and control butterfly valves for installation between flanges according to EN1092, with DVGW approval for use in water systems. Nominal diameter: Temperature range: -40°C up to +200°C (depending on pressure, medium and material) max. 16 bar Operating pressure: Z 011-A Suitable butterfly valve for use in drinking water applications Z014-A This series of valves with tapped holes enables the one-sided flanging of drinking water supply lines. It can also be used as an end-of-line valve. Nominal diameter: Temperature range: -40°C up to...

Open the catalog to page 4
WATER/ AND WASTE WATER TECHNOLOGY - 5

EBRO PRODUCTS | WATER TECHNOLOGY This type of butterfly valve fits perfectly for plastic pipelines and has a disc design for the reduced inner diameter. This construction prevents the disc from touching the pipe wall in the flange. (depending on pressure, medium and material) max. 10 bar SDR11,0 (PE-80) max. 10 bar SDR17,0 (PE-100) max. 6 bar SDR17,6 (PE-80) max. 5 bar SDR33,0 (PE-100) Z 411-A The perfect valve for PE and PP pipes This type of butterfly valve fits perfectly for plastic pipelines and has a disc design for the reduced inner diameter. Due to the tapped holes, this valve can...

Open the catalog to page 5
WATER/ AND WASTE WATER TECHNOLOGY - 6

EBRO PRODUCTS | WATER TECHNOLOGY F012-A Soft sealing double flanged butterfly valve with centrically mounted disc. The robust body and the vulcanised-in liner are suitable for heavy-duty applications in cooling process water circuits and seawater desalination. Nominal diameter: Temperature range: -40°C up to +200°C (depending on pressure, medium and material) max. 25 bar Operating pressure: F 012-A Double flanged body design for one sided flange mounting F012-K1 Double flange butterfly valve in centric design with short body length K1 and DVGW approval for use in drinking water supply...

Open the catalog to page 6
WATER/ AND WASTE WATER TECHNOLOGY - 7

EBRO PRODUCTS | GAS SUPPLY Z 011-A Gas Due to the DVGW approval, this shut-off valve is suitable for installations between flanges in gas supply lines. Nominal diameter: Temperature range: -40°C up to +200 °C (depending on pressure, medium and material) max. 16 bar Operating pressure: Z 011-A Suitable wafer type butterfly valve for use in gas applications Z 014-A Gas This series of valves with tapped holes makes one-sided flanging of gas supply lines possible. It can also be used as an end fitting. Nominal diameter: Temperature range: -40°C up to + 200°C (depending on pressure, medium and...

Open the catalog to page 7
WATER/ AND WASTE WATER TECHNOLOGY - 8

EBRO PRODUCTS | WASTE WATER TECHNOLOGY WB 11 Knife gate valve for clamping between flanges for process and waste water plants with a solid content up to 5%. Nominal diameter: Temperature range: -10°C up to + 120°C (depending on pressure, medium and material) max. 10 bar (depends on nominal diameter) Operating pressure: WB 11 Knife gate valves for use in waste water systems WB 14 This series of valves with tapped holes enables one-sided flanging of sewage water pipes at full operating pressure. Nominal diameter: Temperature range: -10°C up to + 120°C (depending on pressure, medium and...

Open the catalog to page 8
WATER/ AND WASTE WATER TECHNOLOGY - 9

EBRO PRODUCTS | WASTE WATER TECHNOLOGY WB 12 Bi-directional sealing, square flanges with extended face-to-face and integrated flange gaskets makes it very easy to install and to replace other bonnet type valves. The valve flanges also enable end-of-pipe installations. Nominal diameter: Temperature range: Up to +120°C (depending on pressure, medium and material) max. 4 bar Operating pressure: WB 12 Knife gate valves for slurry and fluids with suspended solids MV Single-sided sealing knife gate valve for clamping between flanges in sewage pipes with a solid content up to 5%. Also available...

Open the catalog to page 9
WATER/ AND WASTE WATER TECHNOLOGY - 10

COMMERCIAL PRODUCTS | WATER TECHNOLOGY F012-DE The robust and safe double flanged butterfly valve with double eccentrically mounted disc. Available with EKB or enamel coating with DVGW approval. The shut-off valve is also suitable for underground installation. Nominal diameter: Temperature range: -20°C up to +50°C (depending on pressure, medium and material) max. 16 bar Operating pressure: F 012-DE The solution for water supply systems and transport pipelines KFS / KOS Soft-sealing gate valve with EKB or enamel coating for use in drinking water supply lines. Available in lengths GR 14 and...

Open the catalog to page 10
WATER/ AND WASTE WATER TECHNOLOGY - 11

COMMERCIAL PRODUCTS | WATER TECHNOLOGY RSK Check valves in intermediate flange design with one piece connecting element or as a double wing check valve - metal or elastic sealant. Minor pressure loss and low opening pressure. The installation takes place between flanges pursuant to DIN / ANSI in horizontal or vertical piping systems. Nominal diameter: Temperature range: -196°C up to +400°C, (depending on pressure, medium and material) max. 8 bar plastic version max. 16 bar metallic version Operating pressure: RSK Can be used in all applications. Made of plastic or metal PENSTOCKS As a...

Open the catalog to page 11
WATER/ AND WASTE WATER TECHNOLOGY - 12

ABOUT US EBRO ARMATUREN, headquartered in Hagen, Germany, is one of the world‘s leading manufacturers of industrial valves, actuators and automation technology. With our international network of production plants, subsidiaries and representatives we are always close to the customer. Excellent expertise combined with high-quality products makes us an internationally acknowledged partner of the machine and plant engineering sector. As an owner-managed family business we stand for quick decisionmaking, high individual responsibility, continuity and sustainable investments in research and...

Open the catalog to page 12

All EBRO ARMATUREN Gebr. Bröer GmbH catalogs and technical brochures

  1. SBU ADVANCED

    2 Pages

  2. F 012-DE

    4 Pages

  3. HP 111-E

    4 Pages

  4. K016

    2 Pages

  5. CYCLE LOCK

    4 Pages

  6. Bulk Solids

    8 Pages