LUG TYPE BUTTERFLY VALVE Z 614-K TECHNICAL DATA Nominal diameter: EN 558 Series 20 ISO 5752 Series 20 API 609 Table 1 Flange accommodation: EN 1092 PN 10/16 ASME Class 150 -others on request- Flange Surface Design: Tightness check: ISO 5208, Category 3 Temperature range: -40°C bis +200°C (depending on seat material) Operating pressure: Resilient seated lug type butterfly valve in split - body design for semi-corrosive media. - One piece disc/shaft, centric bearing - Split body with stainless steel screws - Insulation height as per plant regulations - Can be installed in any desired position - Triple shaft bearing - Disc`s sealing surface mirror polished - Materials complying with FDA standards available - Can be disassembled, material-specific recycling possible GENERAL APPLICATIONS - Food and beverage industry The split body design allows quick and easy maintenance.

Z 614-K with bare shaft end Subject to change without notice

TORQUE - The values listed in the table are initial breakaway torques, taken with liquids and lubricant media. *measured at 10 bar operating pressure All values in Nm Subject to change without notice - Please regard these as approximate values, as the objective value depends on different factors like pressure, medium, rubber, quality, temperature ... etc. - Our engineers look forward to help you with exact values for your application. - Powdery (non-lubricant) media Md x 1,3 - Dry gases/high viscous media Md x 1,2 Kv-VALUES - The Kv-value [m3 per hour] is the flow of water at a temperature of...