1. Catalogs
  2. EBRO ARMATUREN Gebr. Bröer GmbH
  3. Technical Datasheet TW80 - TW100 Valve EBRO

Technical Datasheet TW80 - TW100 Valve EBRO
1 /2Pages

Technical Datasheet TW80 - TW100 Valve EBRO

Technical Datasheet TW80 - TW100 Valve EBRO
1 /2Pages

Catalog excerpts

Technical Datasheet TW80 - TW100 Valve EBRO-1

TECHNICAL DATA Nominal diameter: Face-to-face: Flange accommodation: Flange Surface Design: Tightness check: Temperature range: Operating pressure: Body: - one piece - splitted with PTFE seal Seat: DN 80 / DN 100 EBRO works standard DIN 28459 flanges for tank lorries DIN 28459 ASME RF, FF EN 12266 (Leakage rate A) ISO 5208, Category 3 -20°C to +160°C (depending on pressure and medium) max. 6 bar Aluminiumalloy GD-AlSi9Cu3 (3.2163) GK-AlSi12(Cu) (3.2583.02) EPDM (Ethylene propylene diene monomer rubber) NBR (Nitrile butadiene rubber) FPM (Fluorocarbon rubber) PTFE (Polytetraflourethylene) SBR-green (Styrene butadiene rubber) Stainless Steel FEATURES - Maintenance-free - Triple shaft bearing - Can be disassembled, material-specific recycling possible GENERAL APPLICATIONS - Tank lorries

 Open the catalog to page 1
Technical Datasheet TW80 - TW100 Valve EBRO-2

TW 80 with hand lever TW DN 125: upon request Subject to change without notice www.ebro-armaturen.com [email protected]

 Open the catalog to page 2

All EBRO ARMATUREN Gebr. Bröer GmbH catalogs and technical brochures

  1. F 012-DE

    4  Pages

  2. HP 111-E

    4  Pages

  3. K016

    2  Pages

  4. CYCLE LOCK

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.