INFLATABLE SEAT “INFLAS®” TECHNICAL DATA The sealing system was developed for highly abrasive or very sensitive media. Available for all resilient seated butterfly valves with interchangeable seat from DN 80 - DN 600. In closed position, the liner will be pressed against the disc using low air pressure.The media is sealed off securely. Before opening the disc, the chamber is vented behind the liner. This creates an air gap between the liner and the disc, hence low torque is required to open the valve. A gap-free special version (GF) is also available for higher pressures, pressure surges or extremely abrasive media. ADVANTAGES Extremely low wear of parts even in contact with abrasive media Low sized actuators due to reduced torques Low grinding/-clamping of sensitive media between disc and liner Resilient seated butterfly valve type Z011-A INFLAS PRO Vaccum with inflatable liner. Additional safety due to cascade shaft seal, as no false air can be drawn in via the shaft and the cascade simultaneously protects the shaft bearings from dirt and dust. THE EBRO CONTROL 1. Signal “OPEN” appears as a digital signal 2. The air pressure is reduced behind the liner 3. The valve will open if there is no pressure on the liner 4. Position “OPEN” will be confirmed 5. When the signal disappears, the valve will close 6. Position „CLOSED“ will be confirmed 7. When the valve is closed, the liner will be pressurised and the plausibility check is carried out 8. When pressure is on the liner „OK“ will be reported GENERAL APPLICATIONS - Bulk goods - Food industry - Pneumatic conveying systems - Weighing technology - Core shooting machinery (GF-version)

INFLATABLE SEAT “INFLAS®” ØD Z 011-A Inflas® with bare shaft end according to EN ISO 5211

INFLATABLE SEAT “INFLAS®” MATERIAL SPEZIFICATION AND PARTS LIST Description Body Aluminiumalloy Grey Cast Iron Nodular Cast Iron Carbon Steel Stainless Steel Seat NBR EPDM CSM FPM VSI SBR-green Disc Stainless Steel Aluminium Bronze Coating Surface quality Position 6/7/8 Cascade seal Nitrile butadiene rubber Ethylene propylene diene monomer rubber Chlorosulfonated polyethylene rubber Fluorocarbon rubber Silicone rubber Styrene butadiene rubber G-X5CrNiMo19-11-2 1.4301 G-X6CrNiMo18-10 1.4408 X2CrNiMo17-12-2 1.4404 X6CrNiMoTi17-12-2 1.4571 G-X2CrNiMoN26-7-4 1.4469 Hastelloy 2.4883 G-CuAl10Ni 2.0975...

INFLATABLE SEAT “INFLAS®” FUNCTIONAL DESCRIPTION INFLATABLE SEAT CLOSED UNSEALED As the valve rotates into the closed position, the disc makes casual contact with the seat, reducing friction, wear and torque requirements. CLOSED SEALED After the valve is closed, the seat inflates against the disc providing bidirectional bubble tight seal. Inflatable Seat Inflation Pressure Control Position Safety Scan Pneumatic Time Control Electronic Control of all sequences Automatic function control Error Indication evaluable via contact Electronic Pressure Control Vacuum Module (Option) ATEX (Option)