*mydirectindustry

Catalogs
EBRO ARMATUREN Gebr. Bröer GmbH
ELECTRIC ACTUATORS E 50 - E 210

ELECTRIC ACTUATORS E 50 - E 210

1 / 4 PagesView full catalog

ELECTRIC ACTUATORS E 50 - E 210

Product catalog summary

Technical Specifications:

Robust aluminum body with ball-beared wormgear.
Self-inhibiting for safe arresting and changeable clutch nuts for various shaft ends.
Mechanical position indicator for valve position control.
Motor equipped with thermal winding protection switch.
Hand wheel for emergency manual operation.
Maintenance-free with continuous lubrication.

General Applications:

Water and waste water technology.
Chemical and car industries.
Civil engineering and other areas using butterfly valves.

Technical Data:

Types: E 50 - E 210.
Duty class: Class C according to prEN WI69000095.
Valve interface: EN ISO 5211.
Actuation time: 6 s - 180 s.
Corrosion protection: C4 according to prEN WI 6900095, tested to EN 600068-2-52.
Protection class: IP 67 according to EN IEC 60529.
Insulation class: F.
Limit switches: Max. 250 V AC, 3A for DS and WS Actuators; Max. 24 V DC, 10 A for GS Actuators.
Operating temperature: -20°C to +70°C.
Cable glands: 2 x M20 x 1.5; Ø min = 6 mm, Ø max = 13 mm.
Hand wheel: 15 revolutions for 90° with varying torque requirements for different models.

Dimensions and Options:

Dimensions vary by model, with weights ranging from 5 kg to 40 kg.
Options include cover plates with position indicators, additional limit switches, current feedback, potentiometer, torque control, and timer.

Performance Data:

Actuation time from 0° to 90° varies by model, ranging from 6 s to 25 s.
Rated torque ranges from 40 Nm to 3500 Nm depending on the model.
Rated current and starting current vary by model, with power consumption ranging from 0.04 kW to 0.54 kW.
Rated voltage options include 230 V, 400 V, and 24 V, with a frequency of 50 Hz (60 Hz available upon request).
Duty cycle is 30% for all models.
All models have a protection class of IP 67.

Catalog excerpts

ELECTRIC ACTUATORS E 50 - E 210 TECHNICAL DATA Types: Duty class: Valve interface: Actuation time: Corrosion protection: E 50 - E 210 Class C acc. to prEN WI69000095 EN ISO 5211 6 s - 180 s C4 acc. to prEN WI 6900095 Protection class: Insulation class: Limit switches: tested acc. to EN 600068-2-52 IP 67 acc. to EN IEC 60529 F max. 250 V AC, 3A for DS-Actuators max. 250 V AC, 3A for WS-Actuators Operation temperature: Cable glands: Hand wheel: Hand wheel torque: FEATURES - Robust aluminum body - Completely ball beared wormgear - Safe arresting by self-inhibition - Changeable clutch nuts for mounting on different shaft ends - Mechanical position indicator disc for an optical control of the valve´s position - Motor with thermic winding protection switch - Hand wheel enables immediate hand emergency operation if necessary - Maintenance-free, long life service by continious lubrication GENERAL APPLICATIONS: - Water and waste water technology - Chemical industry - Car industry - Civil engineering - Everywhere applicable, where butterﬂy valves are installed

Open the catalog to page 1

112 25 84 40 Subject to change without notice FEATURES Valve interface: EN ISO 5211 Type Actuaction time from 0° - to 90° Rated torque Rated current Starting current Power consumption Rated voltage *Frequency Duty cycle Protection class *Frequency 60 Hz upon request

Open the catalog to page 2

Cover plate with position indicator (E 50) Additional volt-free limit switches Cover plate with position indicator (E 65 - E 210) Torque control Conector terminals Switch box with cable glands

Open the catalog to page 3

ELECTRIC ACTUATORS E 50 - E 210

ELECTRIC ACTUATORS E 50 - E 210

Catalog excerpts

All EBRO ARMATUREN Gebr. Bröer GmbH catalogs and technical brochures