CABLE JUNCTION BOX POLYESTER

KABELVERTEILUNGSKASTEN Systemübersicht System overview Anti-vandalism locking system Non-slip cover plates in accordance with NF EN 124-1 Cover plates lifter, hot-dip galvanized steel - The quantity depends on frame size and classification Frame made of metal, hot-dip galvanized, screwed to the top ring - Reinforced frame for cover plates Class C250 Foldable fall protection grid, made of PRV with hot-dip galvanized steel fasteners Static strength of a least 300 kg (Decree No. 2024-924) - from a cable junction box depth of > 1m, a fall protection grid is recommanded Entry aid device, removable...

CABLE JUNCTION BOX A complete range for a sustainable pit – Composite Simple assembly for smooth installation EBO Systems‘ fibreglass cable junction box are characterised by their high mechanical strength and light weight. The structure is completely modular and the assembly is very simple (no screws). EBO Systems offers you a wide range of products, providing you with a composite solution, and the functionality of a fully modular chamber, adapting to your technical requirements. Areas of application EBO Systems‘ cable junction box are used to interconnect underground cables in new or renovated...

Installation The cable junction box is supplied completely pre-assembled. On request, also available as a set consisting of rings, frame and cover (in individual parts). Assembly is then carried out on site. It is important to note that the individual rings must be pressed together. 1. Preparation of a stable and even subfloor. 2. Position the first ring and align it accordingly. Then stack the rings on top of each other. 3. Use a hole saw to drill the wall for the connections of the pipes. Do not drill through the lower ring. 4. Place the cover frame on the cable junction box using a suitable...

CABLE JUNCTION BOX Cover Plates The non-slip cover plates ensure a safe step and withstand all weather conditions. Norm standard NF EN 124-1 (slip resistance value between 46 and 53). Norm DIN EN 16165 (R12 classification, alpha angle = 29°). Size of the cover plates Frame Frame made of metal, hot-dip galvanised with a minimum layer thickness of 70 μm according to standard NF ISO 1461 reinforced frame for cover plates Class C250 made to measure: The frame can be adapted to the dimensions of the cable junction box Mechanical properties Impact resistance Absorption of water Flammability Smoke toxicity...

Accessories The range offers you the possibility to adapt your cable pits to your specifications. Fall Protection Grids Step and Hand Rail prevents the fall of goods and persons with a static strength of at least 300 kg (Decree No. 2004-924) with steps and removable hand rail NF EN 62262 Locking System Cable Junction Box Lifter with an anti-vandalism system enables easy lifting of the cover plates

Anti-slip base plate Thermosetting base plate with anti-slip patterns with embossed or silica surface Embossed surface Also available in silica surface Application in water networks NOTIZEN NOTIZEN

EBO Systems S.A.S. Industrial area I 5 avenue Jean Monnet 54920 Villers la Monntagne/France Tél: +33 (0)3 82 44 01 07 [email protected]