Catalogs >
EBMPAPST >
RadiPac EC centrifugal fans

RadiPac EC centrifugal fans
136Pages

Catalog excerpts

EC centrifugal fans - RadiPac Edition 2017-07

The ebm-papst RadiPac EC centrifugal fan series is now complete. The new RadiPacs stand out with the following features: With this catalog, you get the technical documentation for the entire RadiPac family. Some new models have been added and are described brieﬂy below. The RadiPac standard These are the fans in sizes 250 to 1000; sizes 250 and 280 are equipped with impellers made of high-quality, injection-molded composites. Sizes 310 to 1000 include the high-efﬁciency aluminum impeller with airfoil blades. This series is designed for maximum efﬁciency, efﬁciency thus far unmatched in this...

Open the catalog to page 2

Product- & characteristic curves overview 6 0 250 and 280 with composite impellers. 0 310 to 1000 use the high-efficiency aluminum impeller with airfoil blades. 0 450, 500 and 560 with motors with integrated active power factor correction. RadiPac - short version (0 450 - 0 560): 76 Combination of aluminum impellers with airfoil blades with the M3G150 third-generation (Gen. III) motor. For minimum installed height. Aluminum impeller with backward-curved blades; without rotating diffusor on fan outlet. For optimum compactness in all directions. RadiPac - ATEX version (0 400 - 0...

Open the catalog to page 3

About ebm-papst As technological leader for ventilation and drive engineering, ebm-papst is in demand as an engineering partner in many industries. With over 15,000 different products, we provide the right solution for just about any challenge. Our fans and drives are reliable, quiet and energy-efﬁcient. Six reasons that make us the ideal partner: Closeness to our customers. ebm-papst has 25 production locations worldwide (including facilities in Germany, China and the USA), together with 49 sales ofﬁces, each of You want the best solution for every project. The interrelationships bet-...

Open the catalog to page 4

Founding of Elektrobau Mulfingen GmbH & Co. KG by Gerhard Sturm and Heinz Ziehl. First tubeaxial fan developed in EC/DC technology. ebm’s success takes off with the new 68 motor. The first ebm foreign subsidiary is established in Sweden. Gerhard Sturm is awarded the Federal Cross of Merit. The sixty-millionth external-rotor fan is produced. Acquisition of PAPST Motoren GmbH in St. Georgen. Buyout of the Landshut (mvl) plant. Development of first fans with integrated electronics. Change of name to ebm-papst. The HyBlade® range of fans sets new efficiency standards. GreenTech - our sign for...

Open the catalog to page 5

* with active-PFC ‘ with active-PFC Data is subject to change without notice at ebm-papst discretion.

Open the catalog to page 6

Product- & characteristic curves overview – RadiPac Type R3G... motor impellers are available in sizes 250 to 560 for all impeller/motor combinations. For sizes 630 to 800, these versions are only available in combination with the lightweight size 150 motor. Operation of a type R3G... motor impeller requires an inlet ring and a motor mounting of suitable dimensions to be provided by the customer. Type K3G... centrifugal fans are also available in sizes 250 to 560 and for all impeller/motor combinations in a ready-to-install design with support struts for wall mounting. For sizes 630 to 800,...

Open the catalog to page 7

Centrifugal module with cube design and improved corrosion protection Centrifugal module with support bracket and reversed mounting plate: Type K3G... centrifugal fans are available in sizes 310 to 560 in an additional mechanical design with a reversed mounting plate. In the standard versions (see pages 6-7), the circumferential chamfer on the mounting plate faces upstream. In the “reversed” version described here, the chamfer faces downstream. Centrifugal module with support bracket / with cube design and corrosion protection: The ready-to-install K3G... centrifugal fans in sizes 250 to...

Open the catalog to page 8

Product overview – RadiPac Centrifugal fan (Short version) Centrifugal module with support bracket (Short version) Centrifugal module with cube design Nominal voltage range VAC Short version Ø 450 - Ø 560 / Compact version Ø 280 - Ø 450 / ATEX version Ø 400 - Ø 630 Centrifugal fan (Compact version) Centrifugal module with support bracket Centrifugal module with cube design Nominal voltage range VAC Short version: In addition to the standard versions, size 450, 500 and 560 RadiPac centrifugal fans in the R3G (motor impeller) and K3G (modular) design variants are also combined with the...

Open the catalog to page 9

RadiPac - standard: Type R3G... RadiPac motor impellers are available in sizes 250 to 560 for all impeller/motor combinations. For sizes 630 to 800, these versions are only available in combination with the lightweight size 150 motor. Operation of a type R3G... motor impeller requires an inlet ring and a motor mounting of suitable dimensions to be provided by the customer. Type K3G... centrifugal fans are also available in sizes 250 to 560 and for all impeller/motor combinations in a ready-toinstall design with support struts for wall mounting. For sizes 630 to 800, these versions are only...

Open the catalog to page 10

EC centrifugal fans – RadiPac ATEX version Compact version Short version

Open the catalog to page 11

Material: Support bracket: Steel, painted black Support plate and inlet ring: Sheet steel, galvanized Impeller: PP plastic Rotor: Painted black Electronics housing: Die-cast aluminium Number of blades: 6 Direction of rotation: Clockwise viewed toward rotor Degree of protection: IP 55 Insulation class: "F" Installation position: Shaft horizontal or rotor on bottom, rotor on top on request Condensation drainage holes: Rotor side Mode: Continuous operation (S1) Mounting: Maintenance-free ball bearings Nominal data

Open the catalog to page 12

Centrifugal module with support bracket Inlet ring with one pressure tap FlowGrid air inlet guard / intake ﬁnger guard P. 104 f. ATEX version Compact version Short version Weight centrifugal module with support bracket – Technical features: See connection diagram P. 118 f. – EMC: A B Interference emission according to EN 61000-6-3 C Interference emission according to EN 61000-6-3, except EN 61000-3-2 for professionally used equipment with a total rated power greater than 1 kW A B C Immunity to interference according to EN 61000-6-2 A B Circuit feedback according to EN 61000-3-2/3 – Touch...

Open the catalog to page 13

RadiPac EC centrifugal fans 136Pages

Catalog excerpts

All EBMPAPST catalogs and technical brochures

RadiPac EC centrifugal fans
136Pages