AC axial fans - HyBlade®
48Pages

{{requestButtons}}

Catalog excerpts

AC axial fans - HyBlade® - 1

AC axial fans - HyBlade®

Open the catalog to page 1
AC axial fans - HyBlade® - 2

New AC axial fans - HyBlade® A new, first-of-its-kind hybrid blade design makes these ebm-papst axial fans even quieter, more powerful and more durable than ever. In designing the HyBlade® fan blades, we have developed a support structure of high-strength, corrosion-resistant aluminium alloy with a jacket of a special, fibre-reinforced plastics. Compared to conventional blades, the optimal aerodynamic shape results in an enormous noise reduction while significantly increasing efficiency. And thus it offers even more advantages for use in refrigeration, heating and ventilation technology....

Open the catalog to page 2
AC axial fans - HyBlade® - 3

New AC axial fans - HyBlade® GreenTech: The Green Company Electrical connections Technical parameters & scope ebm-papst representatives & subsidiaries

Open the catalog to page 3
AC axial fans - HyBlade® - 4

Sustainability is at the Centre of Our Thoughts and Actions. Out of Conviction! Eco-friendliness and sustainability have always been at the core of our thoughts and actions. For decades, we have worked according to the simple but strict creed of our co-founder Gerhard Sturm: “Each new product we develop has to be better than the last one in terms of economy and ecology.” GreenTech is the ultimate expression of our corporate philosophy.

Open the catalog to page 4
AC axial fans - HyBlade® - 5

GreenTech is pro-active development. GreenTech is acknowledged and certified. Even in the design phase, the materials and processes we use are optimi- Every step in our chain of production meets the stringent standards of sed for the greatest possible eco-friendliness, energy balance and – environmental specialists and the public. The 2008 Environmental Prize wherever possible – recyclability. We continually improve the material of Baden-Wuerttemberg, the Green Award 2009, the Energy Efficiency and performance of our products, as well as the flow and noise charac- Award 2009 of the dena –...

Open the catalog to page 5
AC axial fans - HyBlade® - 6

AC axial fans - HyBlade® Ø 500 Electr. connection Blade angle Nominal data Nominal voltage – Material: Guard grille: Steel, phosphated and coated in black plastic Wall ring: Sheet steel, pre-galvanised and coated in black plastic Blades: Pressed-on round sheet steel plate, extrusion-coated in PP plastics Rotor: Coated in black – Number of blades: 5 – Direction of rotation: counter-clockwise, seen on rotor – Type of protection: IP 54 (acc. to EN 60529) – Insulation class: "F" – Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request – Condensate discharge holes:...

Open the catalog to page 6
AC axial fans - HyBlade® - 7

Cable exit: Via terminal box Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034) Without attachments With full square nozzle With guard grille for short nozzle Direction of air flow "A" on request Curves Air performance measured Suction-side noise levels: in ebm-papst full nozzle and without protection against accidental contact LpA measured at 1 m distance to fan axis The acoustic values given are only valid under the measurment conditions listed and installation situation. With any deviation to the stan- dard setup, the specific...

Open the catalog to page 7
AC axial fans - HyBlade® - 8

AC axial fans - HyBlade® Ø 500 Electr. connection Nominal data Blade angle Nominal voltage – Material: Guard grille: Steel, phosphated and coated in black plastic Wall ring: Sheet steel, pre-galvanised and coated in black plastic Blades: Pressed-on round sheet steel plate, extrusion-coated in PP plastics Rotor: Coated in black – Number of blades: 5 – Direction of rotation: counter-clockwise, seen on rotor – Type of protection: IP 54 (acc. to EN 60529) – Insulation class: "F" – Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request – Condensate discharge holes:...

Open the catalog to page 8
AC axial fans - HyBlade® - 9

Cable exit: Via terminal box Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034) Without attachments With full square nozzle With guard grille for short nozzle Direction of air flow "A" on request in ebm-papst full nozzle and without protection against accidental contact 60 Suction-side noise levels: LpA measured at 1 m distance to fan axis The acoustic values given are only valid under the measur- ment conditions listed and With any deviation to the stan- dard setup, the specific values 0,05 viewed once installed or fitted! For...

Open the catalog to page 9
AC axial fans - HyBlade® - 10

AC axial fans - HyBlade® Ø 500 with motor M**110, drawings for direction of air flow "V" Mass [kg] Without attachments Internal diameter of the wall ring at least 503 mm Cable gland With full square nozzle With guard grille for short nozzle Internal diameter of the wall ring at least 503 mm

Open the catalog to page 10
AC axial fans - HyBlade® - 12

AC axial fans - HyBlade® Ø 560 Electr. connection Blade angle Nominal data Nominal voltage – Material: Guard grille: Steel, phosphated and coated in black plastic Wall ring: Sheet steel, pre-galvanised and coated in black plastic Blades: Insertion part made of sheet aluminium, extrusion-coated in PP plastics Rotor: Encased in aluminium – Number of blades: 5 – Direction of rotation: counter-clockwise, seen on rotor – Type of protection: IP 54 (acc. to EN 60529) – Insulation class: "F" – Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request – Condensate discharge...

Open the catalog to page 12
AC axial fans - HyBlade® - 13

Cable exit: Via terminal box Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034) Without attachments With full square nozzle With guard grille for short nozzle Direction of air flow "A" on request in ebm-papst full nozzle and without protection against Suction-side noise levels: LpA measured at 1 m distance to fan axis The acoustic values given are only valid under the measur3 0,30 ment conditions listed and may vary depending on the installation situation. With any deviation to the stan- dard setup, the specific values viewed once...

Open the catalog to page 13
AC axial fans - HyBlade® - 14

AC axial fans - HyBlade® Ø 560 with motor M**110, drawings for direction of air flow "V" Mass [kg] Without attachments Internal diameter of the wall ring at least 559 mm With full square nozzle With guard grille for short nozzle 125,5 8,5 Internal diameter of the wall ring at least 559 mm

Open the catalog to page 14

All EBMPAPST catalogs and technical brochures

  1. 5958

    4 Pages

  2. 4656 N

    4 Pages

  3. 4118 N/2H8P

    4 Pages

  4. 4112 NH3

    4 Pages

  5. 3850

    4 Pages

  6. 3600

    4 Pages

  7. 3414 NGH

    4 Pages

  8. 3214 JH

    4 Pages

  9. 3412 NGMV

    5 Pages

  10. 3218 JH4

    4 Pages

  11. 3218 JN

    4 Pages

  12. 255 M

    4 Pages

  13. 252 N

    4 Pages

  14. 255 N

    4 Pages

  15. 252 H

    4 Pages

  16. 255 H

    4 Pages

  17. RadiPac

    8 Pages

  18. RadiCal

    12 Pages

  19. G2E180-EH03-01

    10 Pages

  20. G4D225-FK10-03

    10 Pages

  21. G4D250-DC10-03

    10 Pages

  22. RadiCal

    2 Pages

  23. S FORCE

    192 Pages

  24. ECI 63

    14 Pages

  25. ATEX

    2 Pages

  26. ErP 2015

    3 Pages

  27. PLUG FANS

    76 Pages

  28. AC axial fans

    31 Pages

  29. ACmaxx

    5 Pages