EBERL drying systems | EBERL The vacuum kiln energy saving efficient Vacuum kilns for sawn and construction timber ranging from 1.5 m³ to 100 m³ Actively pursuing a climateneutral industry - because wood is our passion V-Basic V-Comfort V-Premium

EBERL premises in Bodenkirchen, Bavaria / Southern Germany. Your partner in drying As pioneering inventor of energy-efficient vacuum wood drying. EBERL has become the leading provider of vacuum kilns. Today we offer a unique and complete range of wood dryers, and drying plants for a variety of other raw materials. In addition we supply customised systems and tempering ovens for use in medical engineering, biotechnology and chemistry through collaborations with international enterprises. We see a solid quality achieved through excellence in engineering and an innovative drive as the foundation...

The drying process cooling unit thermal insulation wood stack chamber suction channel control unit pressure channel aeration slot condensate collection tank condensate pump A horizontal cross-section of a kiln illustrating the air circulation. Seen from above. The boiling point of water decreases through a pressure reduction and as a result enables • • • a fast and gentle drying through an accelerated and even moisture extraction from the wood. a high-quality drying and increased flexibility. a lower energy expenditure (for both air circulation and water evaporation), which equates to economical...

V-Basic The vacuum kiln for small quantities of wood ranging from 1.5 to 20 m³ • The ideal kiln for small wood processing companies, offering fast drying and post• • • • • drying for all types of wood, whilst still maintaining outstanding quality. The kilns are made from stainless steel and can be powered either electrically or through a hot-water heating system. Economical condensation by an exterior cooler. Condensate is disposed of through a sluice. Well-proven and even ventilation is provided by the air channel. Operating a fan in vacuum saves approx. 75% energy. The V-Basic just before loading...

V-Comfort The vacuum kiln for wood quantities from 12 to 100 m³ • This kiln for hardwood and construction timber is usually connected to an external • • • • • • heating system. Low thermal and electrical energy consumption. Evenly distributed and reversible ventilation. High humidifying performance due to specially designed cooling circuits / cycles. No external water supply is required. Collected moisture is reused for spraying. Fast and high-quality drying. The V-Comfort after the drying process. Technical data Kiln diameter Stack room length Stack room width Stack room height Stack room gross...

V-Premium The energy-saving kiln with heat pump, no heating connection or water supply needed, low electricity requirement. • Energy-efficient system. • 100% heat recovery during dehumidification, therefore no external heating source required. • Highest possible energy efficiency because the heat pump is located directly in the stream of circulating air. • Fast, economical, high-quality drying. • Only electrical power connection required, thus giving complete flexibility in choice of location. • Outside installation possible thanks to a frost-resistant and integrated control room.

Save time, save energy = efficient drying expansion valve Thanks to the conversion of energy, whereby we dehumidify through condensation and heat using heat recovery; we achieve a high level of energy efficiency. Within the EBERL system, the heat-pump circuit is located directly within the convection stream of circulating air of the vacuum kiln, therefore providing the highest increase in efficiency. cooling coil / serpentine cooler heat exchanger heat pump V-Premium being loaded. Technical data Kiln diameter Stack room length Stack room width Stack room height Stack room gross capacity Electrical...

Operation Simple, intuitive, quick On our user-friendly touch panel, simply enter the wood type, wood thickness and the desired final moisture content. After that, all you have to do is press the start button, and the kiln will take care of the rest by itself. In order to facilitate your daily work with our kilns, we offer a visualisation program. With this you can comfortably monitor and control your kiln from your office computer. The simple interface allows you to enter all relevant data and settings as well as saving and printing logs or diagrams of the drying process. It is even possible...

Special equipment Heat treatment ISPM No. 15 This IPPC-standard is a legal requirement for the export of wood packaging abroad, for example to the USA, Canada, Mexico or China. First the core temperature sensors are inserted into the thickest timber section. Then you can start the corresponding program using the touch panel or visualisation program. The batch is heated until the core temperature of the wood is at 56° C for at least 30 minutes. After a short cooling period the packaging timber is the retracted from the kiln. For the required drying logs a printer is necessary. EBERL Remote-Measurement...

Service EBERL not only produces first-class equipment, but also provides excellent after-sales service. Our project technicians and engineers, as well as our managing directors are personally available for you. Remote access If you grant us access to your machine, we can access the data of your kiln online. Thanks to desktopsharing, we can see what you see. Especially in the early stages, when you are not yet that familiar with the kiln, we can support you with its operation. You can still access the control system from your PC or smartphone at the same time. A lot of customers of other manufacturers...

Further products Dry Air Classic firewood kiln DryBlue

EBERL DISTRIBUTORS Germany Austria Switzerland EBERL Trocknungsanlagen Georg Eberl Tel: +49 (0) 8745 96446 0 [email protected] France MODAG sàrl Jean-Luc BRUCK Tél. +33 (0) 6 08 16 12 91 [email protected] Italy Angomac Andrea Angonese Tel: +39 (0) 445 652018 [email protected] Stefan Csaba Csabay Tel: +40 (0) 744 423347 [email protected] USA/Canada Eberl North America Mr. Theo Leonov Tel: +1 (0) 613 297-2261 [email protected] Latin America INTECFOR GERMANY Heinz Marx Tel: +49 (0) 176 41666879 [email protected] Russia and Russian-speaking countries PFZ Łódź Jacek Kubiak...