DATA SHEET ECOFLOW VENTURI ORIFICE STEAM TRAP RANGE Threaded Version Sizes DN15, DN20 und DN25 - Type EFK-SC & EFG-SC DESCRIPTION The new EBE venturi orifice steam trap range is designed to meet the rigorous requirements demanded by todays industrial plant users. Developed on a modular concept, the trap encompasses a wide range of capacities. From minimal condensate flow requirements, on line drainage and trace heating systems, through to the high flow volumes and variable loads of process heating applications. The trap’s unique innovative design allows for both these conditions to be serviced within the same threaded or socket welded body. Unique modular design for low and high condensate flow Multiple nozzle configurations designed for optimum efficiency at operating point. Fully cast housing with optional BSP threaded or socket weld connections Flexible filtration options, increased secondary filtration available for contaminated systems Graphite seals metal bonded and fully encapsulated to eliminate leakages The new EBE ECOFLOW threaded or socket welded trap incorporates the first venturi steam trap design that is integral with the cast housing. Delivering permanent solutions for all steam trapping requirements. The venturi orifice technology forms part of your total steam system pipework. With no moving parts it is a permanent part of the steam system and will never need replacement. All BSP thread dimensions in accordance with ISO 7-1:1994 In line constructions allows for removal and cleaning of filters and nozzles See table Threaded or socket welded body Page two ASTM 304 SS (DIN 1.4308 Equivalent) ASTM 316SS (DIN 1.4408 Equivalent) Sizes DN15 and DN20 1140 Filter cap ASTM 304 SS (DIN 1.4308 Equivalent) 1190 Principal Filter 400 or 800 Micron SS reinforced 304 SS (DIN 1.4301 Equivalent) 1200 Strainer Gasket Metal reinforced graphite 1210 Top Cap Gasket Metal reinforced graphite 1220 Variable Nozzle Gasket (EFK) 1230 Variable Nozzle Gasket (EFG) Metal reinforced graphite 1240 Variable Nozzle (EFK) 1250 Variable Nozzle (EFG) ASTM 304 SS (DIN 1.4308 Equivalent) 1260 Top Cap retaining screws (EFK) M6 x 16 hex socket heads (ISO 4762 /DIN912) 1270 Top Cap retaining screws (EFG) M6 x 25 hex socket heads (ISO 4762 /DIN912) EBE Engineering GmbH, Rellinghauser Straße 334F, 45136 Essen

ECOFLOW VENTURI ORIFICE STEAM TRAP RANGE Threaded Version Sizes DN15, DN20 und DN25 - Type EFK-SC & EFG-SC DIMENSIONS AND WEIGHTS C Type EFK-SC Type EFG-SC PERFORMANCE DATA BSP ½” (DN15); BSP ¾” (DN20); BSP 1” (DN25) Other socket connections available on request at additional coast PRESSURE / TEMPERATURE LIMITS TMA (Maximum Allowable Temperature) PMO (Maximum Operating Pressure) TMO (Maximum Operating Temperature) Cold hydraulic test pressure EFK (drip leg/trace heating) EFG (High flow process) Note: • Pressures above 20 bar, duty conditions are available upon request Steam trap body Socket weld...