Flanged DN40 to DN50
2Pages

DATA SHEET FULLY CAST VENTURI ORIFICE STEAM TRAP RANGE Flange Version Flange sizes DN40 and DN50 - Type EFK/G/X-F DESCRIPTION is the worlds first and only fully cast venturi orifice steam trap in the market today. Now available in flange sizes DN40 and DN50. This expands on flange sizes DN15 through DN25 and completes all sizes in the ISO range. Unique modular design for low and high condensate flow Multiple nozzle configurations designed for optimum efficiency at operating point. Fully cast flanged housing eliminates any weld joints and guarantees pressure integrity Graphite seals metal bonded and fully encapsulated to eliminate leakages All face to face dimensions in accordance with ISO 26554 In line constructions allows for removal and cleaning of filters and nozzles The new DN40 and DN50 are cast in foundries approved to meet the rigorous requirements demanded by the European pressure directive 2014/68/EU and the stringent German AD2000 Merkblatt W0. Developed on the same modular concept in the entire range, the trap encompasses a wide range of capacities. Allowing the range to meet minimal condensate flow requirements on line drainage and trace heating systems, through to the high flow volumes and variable loads of process heating applications. The trap’s unique innovative design allows for all steam load conditions to be serviced within different flanged bodies. ASSEMBLY PART NO. DESCRIPTION Flanged Body DIN 1.4408 (ASTM A351 – CF8M Equivalent) Filter Cap DIN 1.4408 (ASTM A351 – CF8M Equivalent) Principal Filter 400 or 800 Micron SS reinforced 304 SS (DIN 1.4301Equivalent) Strainer/EFX Variable Nozzle Gasket Metal reinforced graphite EFG Variable nozzle Gasket Metal reinforced graphite EFG Variable Nozzle ASTM 304 SS (DIN 1.4301Equivalent) EFK Top Cap retaining screws M10 x 25 Stainless Top Cap Gasket Metal reinforced graphite EFX Variable Nozzle ASTM 304 SS (DIN 1.4301Equivalent) EBE Engineering GmbH, Rellinghauser Straße 334F, 45136 Essen

FULLY CAST VENTURI ORIFICE STEAM TRAP RANGE Flange Version Flange sizes DN40 and DN50 - Type EFK/G/X-F DIMENSIONS AND WEIGHTS A Größe Anschlüsse Größe Anschlüsse PERFORMANCE DATA Face to face dimensions in conformance to EN 26554 (ISO 6554) Series 1 Flanges Conforming to EN 1092-1 form B PN40 as standard Higher pressure flanges or ASME available on request at additional cost PRESSURE / TEMPERATURE LIMITS PMA (Maximum Allowable Pressure) EFK (drip leg/trace heating) EFG (High flow process) EFX (V.high flow process) *For V.high flow duty conditions consult EBE direct TMO (Maximum Operating...