QME2 SERIES CONTROL PANELS AND STARTERS FOR 2 SINGLE PHASE MOTOR PUMPS 230V WITH THERMAL PROTECTION AND EXCHANGER INTEGRATED (ON MOTHERBOARD) Control panel with electronic components. TECHNICAL DATA • Power supply 1~50/60Hz 230Vca ± 10% • Extra low voltage input for external control from pressure switch or oat switches • Extra low voltage inputs for pressure switch or minimum oat switch against dry running or too full • Micro selector switch for pressure switch or minimum oat (NC or NO contacts) • Delayed action SL/SP2 from 0 to 4s selectable via micro switches • 0.5 s delay to avoid repeated switching operations due to the uctuations of the oat switches • Changeover circuit motor starting sequence integrated on-board (can be disabled via micro switches) • Non simultaneous starting of the motors • LED indicator for network presence • LED indicator alarm level, min / max water • No. 2 LED motor running indicators • Selector switch for off-automatic-manual operation (this command has an automatic return) • Thermal protection on each motor externally resettable • Auxiliary circuits protection fuse • Motor protection fuses • Main disconnecting switch with door lock • Casing made of thermoplastic material • Protection degree IP 50 The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice. Your Life, our Quality. Worldwide.