In-line and circulator electric pump Product Catalogue

EBARA Pumps Europe Cutting-edge technology at your service Our range of in-line and circulator electric pumps offers a wide range of products suitable for the most disparate uses in HVAC, i.e. circulation systems for heating, ventilation and air conditioning. These pumps can be used by a small floor heating system and by a large installation for hospitals or high-rise buildings, both in the primary circuits and in the secondary rings for hot or cold water distribution. This means that our range offers a wide range of solutions, suitable for different applications, in terms of materials, technical...

EBARA Pumps Europe

EBARA Pumps Europe

EBARA Pumps Europe The response to your every requirement Multiple applications in heating, conditioning, cooling or air treatment systems. Applications where it is necessary to circulate a fluid to allow heat exchange; EBARA pumps meet these needs to the fullest. Whether it is clean water or mixed with glycol, whether it is cold water at -10°C or over 110°C, for every application there is a product that can satisfy the most challenging of requirements. This is possible thanks to the different products of the wide range, composed of two large "families": the circulators and the in-line pumps....

EBARA Pumps Europe High speed for saving Efficiency. Energy savings. Over the past few years these are the goals that everyone is focussing on. And it is precisely in this perspective of energy efficiency that, more and more frequently, in applications with circulators and in-line pumps, frequency variators and remote control systems are being used to optimise the operation of electric pumps. Not only that, also to increase the comfort of the system. In fact, through the electronic control and the use of inverters, the reliability and efficiency of the pump reach maximum levels and, at the same...

EBARA Pumps Europe

EBARA Pumps Europe Sectors and Areas of Application Small-scale systems, serving one or two apartments, but also central heating and centralised plants of medium or large size, serving condominiums, skyscrapers or hospitals. EBARA offers a range of products that covers small as well as large requirements. • Small heating systems • Floor heating systems • Centralised and collective systems • Thermal power stations serving buildings • Chillers, hydronic groups or air conditioning systems • Air treatment units • Recirculation systems both on primary and secondary circuits, also in the presence of...

EBARA Pumps Europe TOTAL HEAD

EBARA Pumps Europe High efficiency circulators Type Ego 2 (tech) Single circulators cast iron with threaded connections, impeller in tecnopolimer and a new display for better management and visualisation of operating parameters, ideal for small systems. Twin circulators cast iron with threaded connections, impeller in tecnopolimer, ideal for small systems. Technical data • Total head 0.7 ÷ 7.2 m • Capacity 0.6 ÷ 3.6 m3/h • Liquid temperature: -10°C ÷ +110°C • Ambient temperature: 0 ÷ +40°C • Maximum pressure: 10 bar • Maximum percentage of glycol: 30% • Total head 0,7 ÷ 7 m • Capacity 0,6 ÷ 3,6...

EBARA Pumps Europe Choosing the right product is essential: it means responding effectively to the demands of the system. A wide operating range ensures being able to find the right product. The various models of EBARA circulators and their operating range fully meet this requirement: Ego 2 (Tech), Ego T and Ego B Ego easy (B) Ego slim (B) one extruded piece, without welding points, to ensure its reliability and constructive strength Remote control through the communication module C (standard in the twin versions) there is the possibility of control via Modbus, digital/analog inputs and digital...

EBARA Pumps Europe In-line electric pumps Type LPC LPCD In-line centrifugal pumps with cast iron hydraulics and ventilated motor, suitable for circulation systems and available with 2 or 4 pole motor. Used to pump both hot and chilled water depending on the application, in civil and industrial installations. Available in both single (LPC) and twin (LPCD) versions. Technical data • Total head from 1.2 to 62 m • Capacity from 1.8 to 300 m3/h • Hydraulic efficiency index MEI > 0.4 • IE3 high efficiency motors starting from 0.75 kW • Mechanical seal: SiC/Carbon/EPDM • Shaft in AISI 420 • Liquid temperature:...

EBARA Pumps Europe TOTAL HEAD The in-line centrifugal pumps, both in the steel and cast iron version, for applications related to circulation with certain advantages. Their constructive configuration with suction and discharge on the same axis allows easy and simple installation and optimises their positioning. In fact, both in cases of new systems and for inclusion within existing plants, an “in line” insertion is permitted with the distribution pipes. In the case of smaller electric pumps, it also allows a suspended installation without base or support. In addition, the possibility of choosing...

EBARA Pumps Europe LPC(4) - LPCD(4) In-line centrifugal pumps with cast iron hydraulics and ventilated motor, suitable for circulation systems and available with 2 or 4 pole motor. Used to pump both hot water and chilled water depending on the application, in civil and industrial systems. Available in both single (LPC) and twin (LPCD) versions. RESISTANCE hydraulics built from a single piece of cast iron STANDARDISED the motor support is a rigid coupling and offers the possibility of using standard motors EFFICIENCY a product that guarantees high overall efficiency, thanks to the design and construction...

EBARA Pumps Europe LPS In-line centrifugal pumps with pump body, impeller and seal holder disc in AISI 304 with ventilated 2-pole motor. Suitable for circulation systems, they are used to pump both hot water for domestic hot water and heating systems, and chilled water for air conditioning and cooling, both in civil and industrial systems. EFFICIENCY a product that guarantees high overall efficiency, thanks to the design and construction of the hydraulics (MEI>0.4)* and class of combined motor (IE3 of 0.75 kW) PROTECTION built-in automatic reset thermal protection for single-phase models RESISTANCE...