idroGo
4Pages

Catalog excerpts

IDROGO 5” BOREHOLE CENTRIFUGAL ELECTRIC PUMPS in AISI 304 AISI 304 5” borehole multistage centrifugal electric pumps. APPLICATIONS • Moving clear water from wells, cisterns and primary collection reservoirs • Pressure boosting domestic plants • Small-sale irrigation • Washing vehicles • General pressure increases TECHNICAL DETAILS • Equipped with twin mechanical seal with interposed oil chamber • Supplied with 20 m of H07RN-F power supply cable (5m for IDROGO 40/06 M model) • Single phase version with float on request (version “A”) • Available in the 230V ±10% 50Hz three phase version • Installation: in horizontal and vertical position PERFORMANCE CURVES (according to ISO 9906 Attachment A) MOTOR TECHNICAL DATA • 2 poles self-ventilated asynchronous motor cooled via the moving liquid • Class of insulation F • IP68 Protection degree • 230V ±10%, 50Hz single-phase voltage 400 ±10%, 50Hz three-phase voltage • Permanent capacitor inserted and thermo-amperometric protection with automatic reset incorporated for the single phase motor • Protection under user’s responsibility for the three phase version MATERIALS • External casing, motor cover, seal housing disc, filter and closing ring in AISI 304 • Impeller, diffuser and spacer in PPE+PS reinforced with fibreglass • Shaft in AISI 431 • Upper mechanical seal (motor side) in Carbon/Ceramic/NBR and lower (pump side) in SiC/Carbon/NBR IDENTIFICATION CODE IDROGO A For single phase with float switch only Single phase Model Your Life, our Quality. Worldwide. The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice. PUMP TECHNICAL DATA • Maximum working pressure: 10 bar • Maximum temperature of the liquid: 40°C • Maximum immersion: 17 m • Ma

Open the catalog to page 1

IDROGO 5” BOREHOLE CENTRIFUGAL ELECTRIC PUMPS in AISI 304 PERFORMANCE CURVES IDROGO 40 series PERFORMANCE CURVES IDROGO 80 series (according to ISO 9906 Attachment A) - impeller diameter: 104 mm (according to ISO 9906 Attachment A) - impeller diameter: 102 mm PERFORMANCE TABLE Single phase 230V The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice. IDROGO M 40/06 IDROGO M 40/08 IDROGO M 40/10 IDROGO M 40/12 IDROGO M 40/15 IDROGO M 80/12 IDROGO M 80/15 - IDROGO 40/08...

Open the catalog to page 2

IDROGO 5” BOREHOLE CENTRIFUGAL ELECTRIC PUMPS in AISI 304 Name Casing cover Shaft Impeller Diffusor Motor side mechanical seal Pump side mechanical seal Motor case Motor cover Terminal box Bearing (pump side) Bearing (motor side) Adjusting ring Tie-rod Capacitor [1] O-Ring O-Ring O-Ring Seeger ring Impeller nut Casing Filter Bearing holder support Capacitor-holder box Power supply cable Material EN 1.4301 (AISI 304) EN 1.4057 (AISI 431) PPE+PS reinforced with fibreglass PPE+PS reinforced with fibreglass Carbon/Ceramic/NBR SiC/Carbon/NBR EN 1.4301 (AISI 304) Steel C70 EN 1.4305 (AISI 303)...

Open the catalog to page 3

IDROGO 5” BOREHOLE CENTRIFUGAL ELECTRIC PUMPS in AISI 304 MECHANICAL SEAL MOTOR SIDE Name Fixed gasket Fixed sealing ring Rotating sealing ring Rotating gasket Spring Structure/frame Fixed gasket Fixed sealing ring Rotating sealing ring Rotating gasket Spring Structure/frame Material NBR Ceramic Carbon NBR AISI 304 AISI 304 NBR SiC Carbon NBR AISI 304 AISI 304 PUMP SIDE INSTALLATION TABLE Model IDROGO 40/06 IDROGO 40/08 IDROGO 40/10 IDROGO 40/12 IDROGO 40/15 IDROGO 80/12 IDROGO 80/15 The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the...

Open the catalog to page 4