1GPE PRESS·O·MATIC 1GPE PRESS•O•MATIC_DOMESTIC PRESSURE BOOSTING Units with one electric pump with inverter control unit. The Press•o•Matic electronic device for the control of the electric pumps is based on inverter technology, it controls start-up and stop of the electric pump and modulates motor revs. depending on the water withdrawal from the plant. APPLICATIONS • Domestic pressure boosting • General pressure increases • Small-scale garden irrigation • Washing vehicles • Moving clean water in general TECHNICAL DETAILS • Available in the following versions: - with horizontal multistage electric pumps equipped with body and support in cast iron, impellers and nozzle in PPE+PS reinforced with fibreglass (COMPACT) - with horizontal multistage electric pumps equipped with body, impellers and stages in AISI 304 stainless steel (MATRIX) PERFORMANCE TABLE Model The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice. Suction connection Discharge connection For further information consult the catalogue relative to the electric pumps indicated in the table. For correct functioning of the system, the use of an expansion vessel is recommended Your Life, our Quality. Worldwide.