Introduction
This document provides technical specifications and details for EBARA Pumps Europe's domestic pressure boosting systems, specifically the 1GP H series. These systems are designed for applications such as domestic pressure boosting, small-scale garden irrigation, vehicle washing, and general clean water movement.

Specifications
The booster units are equipped with single-phase electric pumps and include components such as a pressure switch, pressure gauge, brass fitting, flexible pipe, expansion vessel, and power supply cable. The systems are available in two main versions: with cast iron self-priming electric pumps (AGA) and with steel self-priming electric pumps (JEX).

Performance Details
The performance table outlines various models with their respective power (HP and kW), flow rate (Q in m3/h), and head (H in meters). For example, the 1GP AGA 0.75 M - 24H model has a power of 0.75 HP (0.55 kW) and a flow rate range of 0.3 to 3.0 m3/h with a head range of 45.0 to 18.0 meters.

Technical Data
The technical data table provides information on absorbed current (A) and connection sizes for suction and discharge. For instance, the 1GP AGA 0.75 M - 24H model has an absorbed current of 4 A and uses G1 connections for both suction and discharge.

Dimensions and Weight
The dimensions and weight tables specify the physical size and weight of each model. For example, the 1GP AGA 0.75 M - 24H model has dimensions of 555 mm in length and weighs 20 kg.

Disclaimer
The document notes that the contents should not be regarded as binding, and EBARA Pumps Europe S.p.A. reserves the right to make modifications without prior notice.