iepbhELECTRIC PANELS FOR SUBMERSIBLE AND SURFACE ELECTRIC PUMPS Protection and control panels for a submersible or surface electric pump with direct start-up. The control panel can manually and automatically control an electric pump. In the automatic function, the electric pump is controlled by pressure switch, the float or signals that come from the electric probes or from the floats. TECHNICAL DETAILS • Protection against dry running (control using an electric probe) with automatic reset and water return • Reservoir filling level control with two electric probes or floats • Reservoir emtying level control with two electric probes or floats • Cos^ module, optional for controlling against dry running without the use of the electric probes • Motor protection against overloads and an automatic reset phase for three interventions, manual at the fourth • Pump protection against excessive start-ups • Overload and board protection, against short circuits, with fuses • Remote signalling, through NC-NA clean contact, of the protection devices that intervene • Clamps for connecting any single phase motor starter capacitor • Clamps for connecting a pressure switch • Clamps for connecting an alarm float TECHNICAL DATA • Power supply 230V + 10-15% 50/60 Hz (single phase) 400V +10-15% 50/60 Hz (three phase + N) • Temperature: from -10°C to +40°C • IP55 protection degree • Reference standards: EN 60204-1, EN 60439-1, EN 61000-6-2, EN 61000-6-4 (for domestic and light industry application) The content of this publication should not be considered mandatory. EBARA Pumps Europe S.p.A. reserves the right to change the content without prior notice. ELECTRIC DATA TABLE THREE PHASE 4" SINGLE PHASE SUBMERSIBLE MOTORS Japanese Technology since 1912 74 Residential

ELECTRIC DATA TABLE THREE PHASE 6" SUBMERSIBLE MOTORS *= Start with -2 isolators 75 Residential The content of this publication should not be considered mandatory. EBARA Pumps Europe S.p.A. reserves the light to change the content without prior notice.