Group: EATON
Catalog excerpts
HIGH POWER High Power Solutions Circular & Rectangular
Open the catalog to page 1HIGH POWER © Souriau - Souriau is a registered trademark
Open the catalog to page 2High Power Solutions
Open the catalog to page 3Description • Quick screw coupling connector with removable crimp contact • Shell available in aluminum, composite, Stainless steel, Titanium & Bronze • Six layouts with different current rating • Consult us for power hermetic version • High Power offer available on demand Derating curves available for #4 and #8. Mechanical • Shell: Aluminum alloy, Composite, Bronze, Stainless steel, Titanium • Plating: . Olive green cadmium (W/J) . Nickel (F/M/TF/S) . Without plating (X for composite, TT for titanium and JVS for Bronze) . Passivated (K) • Grommet and seal: Silicon elastomer • Insulator:...
Open the catalog to page 4Aluminum, Composite, Stainless steel & Titanium connector Basic Series Type: Crimp contact Contact style: P: Pin contact S: Socket contact Shell size: 11 - 17 - 19 - 21 - 23 - 25 Plating: Aluminum shell: W: Ol ive drab cadmium F: Nickel ZC: Green zinc cobalt Z: Black zinc nickel Composite shell: J: Olive green cadmium M: Nickel X: Without plating Stainless steel shell: K: Corrosion resistant S: Nickel Titanium shell: TT: Without plating TF: Nickel Contact layouts: See next page A: Male connector supplied without contact B: Female connector supplied without contact Specification: 251:...
Open the catalog to page 58D Series | Power Contacts Contact layouts Contact #22D * Power contacts on standard, no spec. 251 needed.
Open the catalog to page 6* Not included in connector P/N. Must be ordered separately. Contact size Contacts available separately only. Lug: tin over copper recommended. Dimensions for indication only. Note: All dimensions are in millimeters (mm)
Open the catalog to page 78D Series | Power Contacts Power tools Crimping tool Contact size Contact type Contact reference Automatic tool for contacts #4 & #8 Contact Contact extraction tool extraction tool (metallic) (plastic) Manual hand tool: M300 BT Manual hand tool for contacts #8 Extraction tool Metallic tool
Open the catalog to page 8Description • Threaded coupling connector with single power contact • Aluminum shell • 3 shell sizes available: - size 19: Up to 450 A at 40°C - size 23: Up to 650 A at 40°C - size 25: Up to 850 A at 40°C • Silver plated contact • Pin contact is equipped with a plastic cap to prevent electrical shock • Modular design: . Removable backshell: straight, right angle or threaded contact . Backshell termination: shrink boot • Connector rating Mechanical • Shell: Aluminum alloy • Shell plating: Black zinc nickel (Z) Cadmium olive drab (W) • Insulator: Thermoplastic • Grommet and interfacial seal:...
Open the catalog to page 98D Series jlHigh Power Contacts Other size: Please consult us. Note: Plug not available with backshell W0 Type. Other thread, please consult us. Note: For other configuration, please consult us.
Open the catalog to page 108D Series jlHigh Power Contacts G0: Backshell low profile (threaded termination) R1: Right angle backshell shrink boot & EMI (crimp version) DimensionsPlug & receptacles 8D5 Plug Shell size Note: All dimensions are in millimeters (mm)
Open the catalog to page 11Shell size Shell size Note: All dimensions are in millimeters (mm)
Open the catalog to page 12With 8D0 (square flange receptacle) Shell size Backshell W0 type With 8D0 (square flange receptacle) Shell size Note: All dimensions are in millimeters (mm)
Open the catalog to page 13Power Contacts Description • A #4 contact for a wide range of wire sizes: Size 8, 10, 16, 25 & 35 mm2 • Easy visual wire identification: colored band on contact • Allow the use of small wire sections: Reducer for wires 8 & 10 mm2 in contact barrel 16mm2 • Ideal for high power applications: Up to 200A continuous (12-01 specif. 261) • Space & cost saving with mixed connectors: Only one connector instead of 2 to transmit signal & power Technical features Mechanical • Shell: Aluminium alloy • Shell plating: Conductive black zinc • Insulator: Thermoplastic • Grommet & seal: Liquid silicone...
Open the catalog to page 148STA Series | Power Contacts Contact layouts viewed from front face of male insulator Contact sizes
Open the catalog to page 15Cable section Compatible with pin and socket contact, wire 16 mm2 Note: All dimensions are in millimeters (mm)
Open the catalog to page 16Description • The utmost solution to combine high vibrations, high temperatures and high power supply: up to 80 Amps continuous rating at 260°C ambient temperature with a 20% space-savings compared with other solutions. • Two contact sizes - size 6 and size 4 - as well as the ability to use quadrax contacts in size 6 cavity layouts. • Standard strain relief backshell or spacer accessory to adapt any specific backshell. • Airbus ABS 1340-1343, 1426-1427, 1452 qualified. • Electro mechanical actuator power supply, alternator, starter applications. Technical features Mechanical • Shell: ....
Open the catalog to page 17853 Series | Power Contacts Contact layouts 8533 Series 8 Connector type Class 200°C Contact size Classes 200°C & 260°C Hermetic 200°C & 260°C (8533 only) 8533 only (ABS) Contact #6 power Contact #4 power Coordinates information: please consult u
Open the catalog to page 18SOURIAU part numbers Basic series Shell class: R: Nickel plated aluminum shell (200°C) K: Stainless steel shell (200°C) E: Stainless steel shell (260°C - except layouts 08-01 & 24-04: 200°C) Contact layout: See previous page Contact type: P: Pin S: Socket Insert class: None: Not grounded G: Grounded - for Quadrax applications only Mandatory suffix for shells sizes 18, 20, 24 & 28 : 109: With contact #4 for cable #6 + sealing boot 115: With contact #4 for cable #8 + sealing boot 126: With backshell, without contact and sealing boot 136: With contact #6 for cable #6 + sealing boot 138: With...
Open the catalog to page 19Self locking ring spacer Note: All dimensions are in millimeters (mm)
Open the catalog to page 20895 Series | Feeder EN6047 Description • Screw coupling with self locking system • Power crimp contacts size 4/0 gold plated • 260A per contact at 120°C • ASNE 0098 and ASNE 0378 compliant Technical features Mechanical • Mounting: Screws • Shell: Steel • Plating: Yellow cadmium • Grommet and seal: Silicon elastomer • Insulator: Thermoset • Contact body: Copper alloy • Contact plating: Gold over nickel • Endurance: 500 mating cycles • Shocks: 300g during 3ms/ 3 directions • Vibrations: Random 100 to 2000Hz-1G2/Hz • Test voltage: 1500 Vrms • Fire proofness and flamability: As per EN2591 •...
Open the catalog to page 21All EATON catalogs and technical brochures
-
ARINC 600 Backshell
2 Pages
-
J15 & J17 Series
2 Pages
-
8D Series Composite
9 Pages
-
RoHS STATUS
22 Pages
-
Hermetic Connectors
68 Pages
-
Bulkhead Feedthrough Solutions
48 Pages
-
Overmoulded Cable assemblies
8 Pages
-
Non-magnetic D-Sub Connectors
53 Pages
-
Backshells and Conduits
8 Pages
-
Catalog UTV series
19 Pages
-
Catalog UTP
24 Pages
-
Catalog Clipper
28 Pages
-
Catalog MSO series
5 Pages
-
Catalog MSM series
5 Pages
-
Catalog MB series
2 Pages
-
Catalog MSG Series
6 Pages
-
Catalog SMS IP series
8 Pages
-
Catalog Push Pull Connectors
64 Pages
-
UTL catalog
80 Pages
-
SMS Quick Mating
23 Pages
-
ELIO® Fiber Optic Technology
44 Pages