Catalogs >
Eaton >
Ex-Safety and main current switches

Ex-Safety and main current switches
100Pages

Add to favorites

Catalog excerpts

CEAG Products Catalogue Part 2: Chapter 5 Ex-Safety and main current switches

Open the catalog to page 1

Ex-Safety and main current switches Table of contents

Open the catalog to page 3

Safety switches are used to reliably isolate the power supply on electrical installations and apparatus during maintenance, cleaning and repair work. Main current switches are used to operate drives, motors and other electrical equipment. Star-delta starters, reversing starters and pole-changing switches (Dahlander switches) can be implemented with CEAG main current switches. Motors have to be protected against overloads, phase failures and overheating: CEAG power circuit breakers and manual motor starters feature phase-failure protection as well as thermal and electromagnetic tripping for...

Open the catalog to page 4

category EN 60947-4 requires only five making and breaking samples. The AC-3 usage category makes great demands on the operating cycles and the service life of motor starters. All CEAG safety switches and manual motor starters up to 180 A fulfil these high requirements for the motor-switching capacity of usage category AC-3 as specified by EN 60947-4-1. The new standard IEC 62626-1 The new standard IEC 62626-1 defines the requirements for safety switches (switch-disconnectors) that are used to provide isolation of equipment during repair and maintenance. These requirements go above and...

Open the catalog to page 5

5.1 GHG 26 / EXKO 2.. Ex-Safety Switches Rated current from 10 A - 630 A Safety for your protection 5 CEAG safety switches can be protected against inadvertent switching on by our integrated locking facility for up to three padlocks in the OFF position. To prevent manipulations, the enclosure covers cannot be opened in the locked position without destroying the enclosure itself. Full AC-3 switching capacity All CEAG safety switches feature full AC-3 motor switching capacities and isolating properties according to EN 60947-4-1 with compulsory opening of the main current contacts; optional...

Open the catalog to page 6

Technical data Marking accd. to 2014/34/EU EC-Type Examination Certificate lECEx Certificate of Conformity Marking accd. to IECEx Permissible ambient temperature Rated voltage Rated current Frequency Rated making-/ breaking capacity AC-3 accd. EN 60947-3 Switch-disconnector for maintenance accd.to IEC 62262-1 Back-up fuse Connecting terminals main contact auxiliary-/Signal contact Degree of protection accd. to EN 60529 Protection class Cable glands/enclosure drilling Weight Enclosure material Enclosure colour Auxiliary contact (option) Padlocking facility 11 Other ambient temperatures on...

Open the catalog to page 7

Ordering details Content Cable gland Auxiliary contact Order No. Customized version on request, auxiliary contacts in Ex ia available Accessories Type Application Fixing method Order No. Mounting plate for Ex-safety switches 10 A 3-pole Size 1 Wall mounting screwless mounting GHG 610 1953 R0101 Size 1 Pipe clamp screwless mounting GHG 610 1953 R0102 Size 1 Trellis-work mounting screwless mounting GHG 610 1953 R0103 Accessories for mounting plates Label holder with type label (blank) for mounting plate size 1,2, 2A and...

Open the catalog to page 8

Technical data Marking accd. to 2014/34/EU EC-Type Examination Certificate lECEx Certificate of Conformity Marking accd. to IECEx Permissible ambient temperature Rated voltage Rated current Ex-safety switches 20 A © II 2 G Ex ed ia IIC T6 / © II 2 D Ex tD A21 IP66 T80 °C PTB 99 ATEX 1161 Rated making-/rated breaking capacity AC-3 Ue 230 V / Ie 20 A accd. EN 60947-3 Ue 120 V / Ie 20 A (2 contacts in series) Rated making-/ breaking capacity DC-13 (L/R = 100 ms) Ue 60 V / Ie 6 A Switch-disconnector for maintenance Class 1 accd.to IEC 62262-1 Back-up fuse up...

Open the catalog to page 9

Ex-Safety and main current switches - 10

Accessories Type Application Fixing method Order No. Mounting plate for Ex-safety switches 20 A 3-pole Size 2 Wall mounting snap on GHG 610 1953 R0104 Size 2 Trellis-work mounting snap on GHG 610 1953 R0106 Type Application Fixing method Order No. Mounting plate for Ex-safety switches 20 A 6-pole Size 3 Wall mounting snap on GHG 610 1953 R0118 Size 3 Trellis-work mounting snap on GHG 610 1953 R0118 Accessories for mounting plates Label holder with type label (blank) for mounting plate size 1,2, 2A and 3 10 GHG 610...

Open the catalog to page 10

Ex-Safety and main current switches - 12

Technical data Marking accd. to 2014/34/EU EC-Type Examination Certificate lECEx Certificate of Conformity Marking accd. to IECEx Permissible ambient temperature Rated voltage Rated current Ex-safety switches 40 A © II 2 G Ex ed ia IIC T6 / © II 2 D Ex tD A21 IP66 T80 °C PTB 99 ATEX 1161 Rated making-/ breaking capacity DC 1/DC 23 accd. EN 60947-3 Connecting terminals main contact auxiliary/signal contact Protection class Degree of protection accd. to EN 60529 Cable glands/enclosure drilling Frequency Rated making/breaking capacity AC-3 accd. EN 60947-3 Switch-disconnector for maintenance...

Open the catalog to page 12

Ex-Safety and main current switches - 13

Ordering details Content Cable gland Auxiliary contact Order No. Customized version on request, auxiliary contacts in Ex ia available Accessories Type Application Fixing method Order No. Mounting plate for Ex-safety switches 40 A 3-pole Size 3 Wall mounting snap on GHG 610 1953 R0118 Type Application Fixing method Order No. Mounting plate for Ex-safety switches 40 A 6-pole Size 3 2 x pipe clamp screw-on11 GHG 610 1953 R0110 1) observe mounting distance Type OU Order No. Accessories for mounting plates Label for label...

Open the catalog to page 13

Ex-Safety and main current switches - 15

Technical data Marking accd. to 2014/34/EU EC-Type Examination Certificate lECEx Certificate of Conformity Marking accd. to IECEx Permissible ambient temperature Rated voltage Rated current Ex-safety switches 80 A © II 2 G Ex ed ia IIC T6 / © II 2 D Ex tD A21 IP66 T80 °C PTB 00 ATEX 1091 Rated making-/ breaking capacity DC 1/DC 23 accd. EN 60947-3 Connecting terminals main contact auxiliary/signal contact Protection class Degree of protection accd. to EN 60529 Cable glands/enclosure drilling Frequency Rated making/breaking capacity AC-3 accd. EN 60947-3 Switch-disconnector for maintenance...

Open the catalog to page 15