ELIO® Fiber Optic Technology
44Pages

ELIO ® FIBER OPTIC ELIO® Fiber Optic Technology EN4531, ABS1213, ABS1379, ARINC 801

ELIO® Fiber Optic Presentation Today’s technology for Airborne & Military equipment is more and more complex, requiring the management of an increasing flow of information at greater speeds combined with the necessity to save weight. In response to this need, SOURIAU offers a wide range of copper and fiber optic solutions for high speed networks in harsh environments. Fiber optic is the best solution when high data-rate, EMI immunity and weight savings are required. The ELIO® terminus can handle data speeds from several Mbit/s up to several Gbit/s thanks to its excellent optical performance...

ELIO ® Fiber Optic © 2014 SOURIAU - SOURIAU is a registratred trademark

ELIO® Fiber Optic Technology

ELIO® Fiber Optic | Overview Ground Army Civil Aeronautics Railway & Industrial © Aleksey Stemmer / Fotolia Rotary Wing Edward I. Fagg, U.S. Navy Courtesy of Esterline Communication Systems Typical applications Military Aircraft

ELIO® Fiber Optic | Overview Features & Benefits Ruggedized Physical Contact robust Flight proven A380. Standardized worldwide (EN4531, Airbus qualified). Withstanding the most severe vibration levels (A400M qualified). Easy to Clean user friendly Easy access to the end face of both male and female contacts: - No risk to damage the sleeve when cleaning. - No risk to capture dust inside the sleeve cavity. Tool Free easy to install Easy contact insertion with 1/4 turn bayonet. Easy to Terminate ready in 5 min - Hermaphroditic terminus (same in receptacle and plug). - ST®-like assembly process.

ELIO® Fiber Optic | Overview Souriau ELIO® fiber optic Aerospace standards ELIO® fiber optic Singlemode or Multimode contact Rectangular connectors ARINC 600 / 809 / 404 & DOD Standard #8 Quadrax cavity adaptor ► ELIO® contact can fit in any #8 Quadrax cavity ► Many optical/electrical hybrid layouts available in many ® ELIO can fit pes connector ty

ELIO® Fiber Optic | Overview technologies overview Hermetic 10-9 atm.cm3/s Reinforced sealing Lighweight Rack & panel Lanyard release A complete optical solution ► Backshells: Souriau has developed a dedicated backshell range to ensure the best optical performance ► Harnesses and Patchcords: Souriau offers support from design through manufacturing

ELIO ® Fiber Optic © 2014 SOURIAU - SOURIAU is a registratred trademark

ELIO® Fiber Optic Technology

ELIO® Fiber Optic | Contacts ELIO® contacts multimode & singlemode Multimode contact • Robust spring-loaded butt-joint optical contact using ST style ferrule (diameter 2.5mm) • Contact size equivalent to a #16 contact • Anti-rotation of the contact for better vibration withstanding and optical performance • Boot-grommet for rear sealing and protection of the cable against excessive bending • Compatibility with loose and tight structure cables • High level optical performance even after aging Singlemode contact • Bayonet locking system: no tool needed for mounting/dismounting • Compatible...

ELIO® Fiber Optic | Multimode Contact ELIO® multimode contact Ordering information ELIO Cable external diameter & Contact sealing: 09N: 0.9±0.1mm. Non waterproof 18N: from 1.5mm to 1.9mm. Non waterproof 18W: 1.8±0.1mm. Waterproof 20N: from 1.7mm to 2.1mm. Non waterproof 20W: 2.0±0.1mm. Waterproof Fibre type: G: ELIO® Multimode fibre, 125 micrometers cladding Boot type: L: Long boot S: Short boot N: No boot (non waterproof version only) Contact version index Note: For ABS1379/EN4531 cross reference, please consult us. ELIO® contact dimensions O-ring Bayonnet Ferrule holder Cable Short boot...

ELIO® Fiber Optic | Multimode Contact MIL-DTL-38999 Series III/EN3645 ELIO® high density insert with multimode contact • Standard MIL-DTL-38999/EN3645 shells without shielding ring (aluminum, composite, stainless steel, bronze) • Environmental performance as per EN4531 based on MIL-DTL-38999/EN3645 • Temperature range: - 65°C to +125°C (cable limitation) • Fiber optic connector for all military and aeronautical applications wherever severe vibration or mechanical resistance are required: - Ground army, - Civil aircraft, - Marine, - Military aircraft, - Rotary wing Note: Layouts 15-06 and...

ELIO® Fiber Optic | Multimode Contact ELIO® high density insert with multimode contact Ordering information - Connectors delivered without contact Composite, Aluminum & Stainless Steel 8D 8D Shell type: 5: Plug 0: Receptacle with 4-hole square flange fixing 7: Receptacle with single hole jam nut fixing (aluminum & stainless steel) Designation: E: ELIO® optical connector Shell size: 09 - 11 - 15 - 13 - 19 - 21 - 25 Plating: Aluminum: Composite: Z: Zinc nickel J: Olive green cadmium ZC: Zinc cobalt M: Nickel W: Olive green cadmium X: Without plating F: Nickel Stainless steel: K: Passivated S:...

ELIO® Fiber Optic | Multimode Contact MIL-DTL-38999 Series III/EN3645 with ELIO® multimode contact and ELIO® AQ Adaptor for Quadrax #8 cavities • ELIO® AQ is an adaptor to enable the ELIO® contact to fit in any #8 cavities multimode contact • Multiple possibilities to mix optical and electrical signals in the same insert • Compatible with standard MIL-DTL-38999 Series III/EN3645 connectors (aluminum, composite, stainless steel, bronze) • Design ensures ELIO® optical performance • Environmental performance as per MIL-DTL-38999 and EN3645 standard • Temperature range: - 65°C to +150°C (cable...

ELIO® Fiber Optic | Multimode Contact Dimensions 3.17 Max (Bronze) 3.20 Max (Aluminum & Stainless steel) L Type 0 Square Flange Receptacle Receptacle Type 0 & 7 Metal Receptacle Type 0 Composite Female insulator Male insulator Plug + Receptacle Type 0 & 7 Metal Plug + Receptacle Type 0 Composite Note: All dimensions are in millimeters (mm)