Catalog UTV series
19Pages

Ruggedized reverse bayonet connectors Completely intermountable with VG 95234 : the MS 501 reverse 5 bayonet connectors Description This connector series is an enhanced version of the VG 95234 connector standard but remains completely intermountable with VG 95234 : the MS 501 reverse bayonet connec5 tors. Features and benefits (see also page 3) • An interfacial seal is present on the male inserts to extend the creepage distance and to have a better sealing when the connector is mated. • The insulator is retained into the plug or receptacle shell by a metallic retaining ring which can be removed with a small screwdriver. Once removed, user can defined insulator orientation. • Contacts gauge 8, 1 or 16 are machined crimp contacts, removable thanks to a clip on the contact. 2 • No tools are needed to insert contacts into the insulator. An extraction tool is available to extract the contacts. The tool is engaged by the front face of the connector and the contacts are rear released. • Contacts are crimped thanks to very common toolings. • The connector is rated 2 levels of water protection (see page 3): Dynamic IP67/IP68/IP69K when mated and used with suitable accessories, a grommet or a sealed back shell. • This connector can be supplied fully assembled or in component form (please consult us). • Corrosion spray resistance is rated up to 500 hours salt spray • Cadmium and lead free materials are used

New UTV ruggedized series New UTV series: • The ruggedized product range in the TRIM TRIO broadline. • Using size 1 signal and size 1 & 8 power contacts for up to 6 2 30 Amps per contact. UTV series major technical features & benefits • Ruggedized full metal reverse bayonet connector – Enabling 500 mating-unmating without wear out – Secure locking device Audible “click” when mating Visible yellow dot to indicate end of mating cycle Connector will remain IP68 even when: – Pulling on the cable – Bending the cable Connector withstands high pressure water cleaning. * With appropriate back shell...

Yellow marking for locking end indication Wear pins Pin contact to crimp with metallic retention clip Retaining insulator ring Hard Thermoplastic insert Interfacial seal Receptacle shell Plug Roller Socket contact to crimp with metallic retention clip Retaining insulator ring Hard Thermoplastic insert Plug shell

Technical Features (see also page 3) Mechanical • Mechanical endurance : 500 mating and unmating • Contact resistance : - 2.5 mΩ maxi for contact # 16 - 1.3 mΩ maxi for contact # 1 2 - 0.9 Ζ Q maxi for contact # 8 following NFF 61030 • Climatic category : -40ºC +100ºC Dry heat test : +100ºC during 96 h • Maximum current per contact : - 1 Amps for contact # 16 5 - 20 Amps for contact # 1 2 - 30 Amps for contact # 8 • Damp heat : 21 days, 40°C, 95% relative humidity • Minimum retention force of the contact in the insulator : - 70 N for contacts # 16 (1.6 mm) - 90 N for contacts # 1 (2.4 mm) 2...

Connectors Ordering Information (without contacts and accessories) Shells, backshells, contacts and accessories have to be ordered separately Series Shell type Rear mounting receptacle Plug Rear mounting receptacle for PC tails contact # 16 contacts mounted Shell size : 1 - 20 -22 - 24 - 28 - 32 - 36 - 40 8 Layouts Contact type : P - Pin S - Socket Insert Orientation : N ; W ; X ; Y ; Z or 0 0 = for insulator not installed in the shell Modification Code : Please consult us Nota : Please consult us if you want to order the connector in component form (shell and insert).

Connector Dimensions Receptacle Shell size Receptacle with PC tails contact # 1 6

Shell size Maximum thickness of the panel for rear mounting Note : The above panel cut-out enables front mounting of all receptacles.

Shell size

(marking on front face of female insulator) Note : For other layouts: consult factory. Alternative insert orientation positions Angular displacement of insert Angular Position N Layouts Insulator weight (g) Male Female 10

Contacts Contacts come from our well known TRIM-TRIO Series. They are precision solid machined crimp snap-in pins and sockets for heavy duty top performance requirements. Springs on both contacts are made of spring-tempered, heat treated, beryllium copper. The socket inner spring supplies high contact pressure to ensure low-resistance contact between pin and socket. The socket contact features closed entry to prevent probe damage. Crimp barrels have insulation grips for vibration support and are provided with a cable stop and inspection hole. Contact accommodation • “UTV” connectors accept...

Contacts Dimensions Contacts # 1 (1 mm) 6 .6 Length L = see table page 1 2 131

Contacts Part Numbers Note : Dimensions are not contractual and may be subject to modifications. * Allowable by the insert

Accessories Backshells ordering information Modification Code Backnut R Cable clamp C Backshell for PMA tube S Cable clamp with sealing gland J Cable clamp with sealing gland (trumpet) K Taille de boîtier : 1 20 - for shielding 8 Cable clamp with sealing- gland 22 - 24 - 28 - 32 - 36 - 40 T S - Straight backshell E - Elbow backshell Shell size : 1 - 20 - 22 - 24 - 28 - 32 - 36 - 40 8 Layout (grommet included) or 00 (without grommet) Adaptor type : 10 - long 00 - short Grommet type : M for male or L for female (if grommet needed) Plug cap: F ex: VGE1Fxx (xx = shell size) receptacle cap: E...

Grommet (only when needed on spare parts) Grommet are delivered with a conical ring Layout Grommet type Part number Wire insulator diameter (mm) Mini * Please consult us if your wire has an insulation diameter over these values, we will propose you another grommet. Grommet filler plug Contact size Part number Panel gasket Shell size Part number

Synoptic of straight backshells (for IP67 applications) Cable clamp Cable clamp Cable clamp with with Cable clamp Cable clamp Cable clamp Cable clamp sealing gland sealing gland with with with with (trumpet (trumpet sealing sealing sealing sealing shape to shape to gland for gland for gland gland avoid cable avoid cable shielding shielding wound) Long adaptor with PG outlet Short adaptor with PG outlet NB: IP68 backshells are available under request