Group: EATON
Catalog excerpts
MSO Rectangular boardmount connectors to mate with MSM cable connectors Description The MSO series, derived from the MSM series, is for straight or right-angled application on a printed circuit board. Pre-assembled MSO connectors with pin or socket N(16 contacts are intermateable with the existing MSM rectangular cable connectors. The N° 16 TRIM TRIO .0625” (1.6mm) diameter contacts are available in either solid machined or stamped and formed versions. The polarizing hardware can be delivered in either guiding or jackscrew versions. Features and benefits • Connectors supplied pre-assembled with dip solder contacts. • Contacts available in solid machined or stamped and formed version. • Available in 9-18-34-50-75 positions. • For right-angled versions, there is a choice of 9-18 and 34 contact positions. • 34 contact positions suitable for V.35 applications (see section V.35) • Polarising hardware prevent mismating. • UL94-V0 rated thermoplast. Connector Material : Glass filled polysulfone Flammability rating : UL94-V0 Polarizing hardware: Brass nickel plated Contacts: High conductive copper alloy • “MSO” with pre-assembled contacts are intermateable with the “MSM” rectangular cable connectors equipped with TRIM TRIO crimp-type removable snap-lock contacts. Plating table Performance characteristics Operating temperature: -55°C to +1 25°C Current rating: 5 Amp for stamped contacts 7.5 Amp for machined contacts Contact resistance: ͨ 3 mΩ Insulation resistance: 5000 M min. Test potential: 2000 VAC Durability: 500 matings and unmatings. Plating for solid machined contacts: No digit (std) = Min. 0.4 µ Gold all over, over Nickel. T = 3 - 5µ Tin all over Plating for Stamped and formed contacts : K9 (std) = Min. 0.4µ Gold in contact area, 3 - 5µ SnPb on solder tail. T = 3 - 5µ Tin all over How to order Connector family Contact arrangement N° 1 contacts 6 Type of housing Plug body with male contacts Receptacle body with female contacts Contact termination straight dipsolder Right angle dipsolder Guide pin and socket Threaded jackscrew pin and socket Design variation E1: Solid machined contacts SE1: stamped and formed contacts Plating indication
Open the catalog to page 1Straight boardmount with guiding hardware (MSO--M-K1--) MATING FACE MALE For other platings: See plating table. Other solder tail lengths on request Selective loading on request
Open the catalog to page 2Right angle boardmount with guiding hardware (MSO--M-G1--) MATING FACE FEMALE For other platings: See plating table. Other solder tail lengths on request Selective loading on request
Open the catalog to page 3MSO recommended drilling hole pattern STRAIGHT VERSION RIGHT ANGLE VERSION RIGHT ANGLE VERSION PLUG AND RECEPTACLE PLUG RECEPTACLE STRAIGHT VERSION RIGHT ANGLE VERS RIGHT ANGLE VERSION
Open the catalog to page 4MSO recommended drilling hole pattern STRAIGHT VERSION RIGHT ANGLE VERSION ONLY STRAIGHT VERSION ONLY STRAIGHT VERSION
Open the catalog to page 5All EATON catalogs and technical brochures
-
High Power Solutions
36 Pages
-
ARINC 600 Backshell
2 Pages
-
J15 & J17 Series
2 Pages
-
8D Series Composite
9 Pages
-
RoHS STATUS
22 Pages
-
Hermetic Connectors
68 Pages
-
Bulkhead Feedthrough Solutions
48 Pages
-
Overmoulded Cable assemblies
8 Pages
-
Non-magnetic D-Sub Connectors
53 Pages
-
Backshells and Conduits
8 Pages
-
Catalog UTV series
19 Pages
-
Catalog UTP
24 Pages
-
Catalog Clipper
28 Pages
-
Catalog MSM series
5 Pages
-
Catalog MB series
2 Pages
-
Catalog MSG Series
6 Pages
-
Catalog SMS IP series
8 Pages
-
Catalog Push Pull Connectors
64 Pages
-
UTL catalog
80 Pages
-
SMS Quick Mating
23 Pages
-
ELIO® Fiber Optic Technology
44 Pages