Eaton Everflex® Hose and Fittings Catalog Solutions for Your Most Demanding Applications

Everflex Eaton has been a pioneer in the production of hoses made with Teflon® resin. Everflex hoses are ideally suited for use in applications where high and low temperature, chemical resistance, low coefficient of friction, flexibility, and non-aging characteristics are required. Since 1961, Everflex has been the premier brand of hose products made from Teflon resin for use in truck, chemical, hot melt, paper and pulp, hot presses, steam, packaging, paint, machinery and many other demanding applications. Teflon® is a registered trademark of DuPont used under license by Eaton. EATON Everflex...

Application Data Smooth Bore Hose Table of Contents Design Considerations Section A Steam Hose Safety Information A-3 Why Eaton Everflex Hose? A-5 Hose Length Information A-6 Everflex Smooth Bore Hose Section B Convoluted Hose and Hose Ends Section C Conv-O-Crimp Bulk Hose C-2 Conv-O-Crimp Hose Ends C-3 Everswage Swaged Hose Ends, Components and Fitting Section D Everswage Hose Ends D-2 Everswage Fitting Bill of Material Cross-Reference D-8 E-Series Crimp Hose Ends and Fittings Section E E-Series Crimp Hose Ends E-2 Field Attachable Fittings Section F...

Smooth Bore vs. Convoluted The primary differentiators between smooth and convoluted tubes are size and bend radius. Smooth bore hoses are generally only available in tube diameters of one inch or less, and they will have much greater minimum bend radii. For example, one inch smooth bore hose has a minimum bend radius of 12 inches while the same size convoluted hose has a minimum bend radius of only three inches. Convoluted hoses are also more resistant to collapse in vacuum. Smooth bore hoses tend to have a lower price than same-sized convoluted hoses. Wall Thickness In applications where a...

This catalog is intended as a guide in selecting the proper hose and fittings for the applications listed herein. It contains cautions, warnings, guidelines and directions for the safe and proper use of Everflex hose. All these directions and footnotes should be read and understood before specifying or using any of these hoses. This symbol is used when personal injury is possible. i WARNING: A failure of Everflex hose in service can result in personal injury, death or damage of property. Do not use Everflex hose at temperatures or pressures above those recommended by the manufacturer. All operators...

Make Your Selection With Safety In Mind • Select a hose identified as steam hose construction. • Identify the type of service the steam hose is required to accomplish and review these considerations: b) What is the anticipated frequency of use? c) What is the actual pressure of the steam service? d) Is it subject to surges or peak pressures? e) What is the temperature of the steam? f) Saturated (wet) or superheated (dry) steam? g) What are the external conditions in the area where the hose will be used? Recognize that spillage, or accumulations of corrosive chemicals or petroleum based materials...

Temperatures of Saturated Steam at Various Pressures Lbs. Per Lbs. per Sq. Inch Degrees Degrees Sq. Inch Pressure Fahrenheit Centigrade Pressure Degrees Degrees Fahrenheit Centigrade WARNING Steam heat is hotter than 212°F (boiling water) and increases in temperature as pressure increases. See safety information on page A-3. EATON Everflex Hose Catalog E-HOEV-MC001-E5 February 2014

■ Why Eaton Everflex Hose? • Everflex hose made from Teflon resin has excellent temperature characteristics. It works well in high ambient, fluid or gas media temperatures (+450°F). It works equally well in cryogenic applications (-65°F). • Everflex hose has a broad range of chemical resistance. It is inert to most commercial chemicals, acids, alcohols, coolants, elastomers, petroleum compounds, solvents, vinyls, synthetic lubricants, and hydraulic fluids. Chemical Resistance Guidelines are found on pages I-2. • Everflex hose withstands continuous flexing, vibration, or impulse. • Everflex hose...

Application Data How To Order Hose Length Information Warranty How To Order: 1. Specify quantity required: a. For bulk hose in random lengths, state quantity in feet. Ex. 150 ft. S-12. b. For specified ("cut”) lengths of hose, state number of pieces. 10 pcs. Ex. S-12-00200. c. Eaton reserves the right to ship +10% of the maximum reel length quantity or bulk quantity ordered. 2. Specify part number: a. For bulk hose, state hose style number and dash size. Ex. 100 ft. S-12. b. For cut lengths, state hose style number and dash size plus length to the nearest 1/8 inch. Ex. 10 pcs. S-12-00125 indicates...

Everflex Smooth Bore hose made from Teflon resin is specified in many of the most difficult applications across various industries. The extruded tube has excellent flex life, high temperature resistance and chemical resistance. Additionally, Everflex hose is an excellent choice in applications requiring steam cleaning of an assembly or transfer of a highly viscous media, such as adhesives, paints or food products. The 304 stainless steel wire reinforcement provides the strength necessary to carry the working pressure and the durability to withstand harsh environments. The optional 316 stainless...

■ SC-Series Smooth Bore Static Dissipating SC-Series** hose is identical to the S-Series with one exception. SC hose has an internal conductive static dissipating tube that provides a path to the hose Construction • Conductive Teflon inner tube • One or two layers of stainless steel braid • A minimum wall thickness of .040”. end fittings for applications where flow induced electrostatic charges can occur. The minimum bend radius is measured in inches to the inside bend. Multiply Applications • Steam • Compressor discharge • Chemical transfer the bend radius by 1.25 for dynamic applications. **...