Catalogs >
Eaton Hydraulics >
Hydraulic Remote Controls

Hydraulic Remote Controls
26Pages

Catalog excerpts

Hydraulic Remote Controls Powering Business Worldwide

HRCP-A Function and Dimensions -------------------------------------------------------------16 HRCP-B Function and Dimensions -------------------------------------------------------------17 HRCP-C Function and Dimensions -------------------------------------------------------------18 HRCP-D Function and Dimensions -------------------------------------------------------------19 HRCP-E Function and Dimensions -------------------------------------------------------------20 HRCP-F Function and Dimensions -------------------------------------------------------------21 HRCP-G Function and...

Open the catalog to page 2

General Description Supply flow from a dedicated pump Hydraulic Remote Controls (HRCs) are used to activate and control directional valves or pumps from a remote and single operating station. HRCs come in hand, foot and mechanically operated versions. On vehicles they are typically installed in seat armrests or in a console. There are various methods of supplying the flow to the Hydraulic Remote Control. The most common and generally recommended is a separate pump. In all applications, filtrations must be installed to maintain the fluid cleanness level within the specified limit....

Open the catalog to page 3

General Description Features and Benefits • Less noise. The use of an HRC allows better insulation between the cab, engine and other machine parts. Lower hysteresis provides superior control and as a result reduces vehicle shock and subsequent noise levels. • Higher productivity. HRCs require very little operator effort, increasing more productivity from both man and machine. • Enhanced operator safety. • Precise control. The HRC needs only low working pressure, about 30 bar (435 psi). Reducing the risk to the operator in a situation of pipe failure. Excellent pressure metering capabilities...

Open the catalog to page 4

HRC4 Model Code Manual operated double function models Description The “HRC4” series is a double function valve that may be fitted with many different styles of hand-operated levers. This unit is typically used to control two double acting spools using a single joystick-style actuator. This provides a single-handed, user-friendly device to control two separate functions. Functional Symbol Hydraulic Remote Control - Joystick Mount type A Through holes(4Xφ7mm) B Slot Port size and body materials 1 BSP G1/4 (JIS PF1/4), cast iron 2 BSP G3/8 (JIS PF 3/8), aluminum 3 BSP G3/8 (Only P port G1/4),...

Open the catalog to page 5

3 29 6-PF 1/4 O-ring port Fitting tightening torque:40.8±2 N.m 6-PF 1/4 O-ring port* Fitting tightening torque: 37+3.0 N.m 6-PF 1/4 O-ring Port Fitting Tightening Torque: 25±2.5N.m EATON Hydraulic Remote Controls Catalogue E-VLOV

Open the catalog to page 6

• P and T ports • Four work ports • All located on the underside of the valve • Single ~ Two electric button switch Continuous rated current of switch: DC30Vx6A Spring back EATON Hydraulic Remote Controls Catalogue E-VLOV-MC002-E4 December 20

Open the catalog to page 7

• P and T ports • Four work ports • All located on the underside of the valve • Single electric button switch Continuous rated current of switch: DC30Vx6A Spring back Tilted direction of handle (RH) Tilted direction of connector (LH Tilted direction of handle (LH) EATON Hydraulic Remote Controls Catalogue E-VLOV-MC002-E4 December 2015 6-PF 1/4 O-ring port Fitting tightening torque: 37+3.

Open the catalog to page 8

• P and T ports • Four work ports • All located on the underside of the valve • Three electric button switch Continuous rated current of switch: DC30Vx6A Spring back Switch”1” Single operating angle (Ports 1,3) operating angle (Ports 2,4) 31 (Lean center position) JIS D5403 CA104 Male & Female of automobile parts (each 1EA) 6-PF 1/4 O-ring port Fitting tightening torque: 37+3.0 EATON Hydraulic Remote Controls Catalogue E-VLOV-

Open the catalog to page 9

• P and T ports • Four work ports • All located on the underside of the valve • Two electric button switch • One electric proportional switch • FNR (Front and Reverse) switch is optional Continuous rated current of switch: DC30Vx6A Spring back Electric Switch SPEC +26° 1. Push Button Switch (S1, S2) S1 White White S2 Yellow Yellow 1-1. Continuous Rated Current: 3A-24VDC 2. Proportional Switch (P1) 4V (+26°) Red (+5V) Blue(Output) 1V (-26°) Black (Ground) Violet 6 (R) Brown 2 Pink 4 (Center) (Ground) Orange 1 (F) 3-1. Continuous Rated Current: 3A-24VDC Proportional Switch (P1) 1. Total...

Open the catalog to page 10

• P and T ports • Four work ports • All located on the underside of the valve • Four electric button switch Continuous rated current of switch: DC30Vx6A Spring back #2 Double S/W Right #3 Front S/W EATON Hydraulic Remote Controls Catalogue E-VLOV-MC002-E4 December

Open the catalog to page 11

HRC2 Model Code Single Joystick The “HRC2” series is the most basic form of HRC. It is typically used to control a dozer or similar single function. As with all HRC models, this valve operates on the pressure reducing concept, using a constant inlet pressure, and providing a metered variable outlet pressure as a direct result of the lever displacement. Repeat as needed up to 8 sections Hydraulic Remote Control - Joystick Mount type A Port size and body materials 1 None button Number of Valves in Stack** 1 Output pressure of port #1 A## Proportional without forced terminal rise Proportional...

Open the catalog to page 12

Description Button • P andT ports (Side) Continuous rated current of switch • Two work ports (Underside) DC30Vx6A • With or without single button Spring back EATON Hydraulic Remote Controls Catalogue E-VLOV-MC002-E4 December 2015

Open the catalog to page 13

• P and T ports (Side) • Six work ports (Underside) • With or without single button Continuous rated current of switch: DC30Vx6A Stamping of Model Name Serial No. (Detail -A-) EATON Hydraulic Remote Controls Catalogue E-VLOV-MC002-E4 December 2015

Open the catalog to page 14

HRCP Model Code Pedal Description The “HRCP” series is a single or dual pedal valve. Typically used to control a single doubleacting spool as a travel pedal on a tracked vehicle. As with all HRC models, this valve operates on the pressure reducing concept, using a constant inlet pressure, and providing a metered variable outlet pressure as a direct result of the pedal displacement. Hydraulic Remote Control - Pedal Operating type A Double pedal Single pedal Single pedal - push only Double pedal with damping Single pedal w/o foot plate Double pedal w/o foot plate Double pedal with damping w/o...

Open the catalog to page 15