video corpo

E-HOEV-MC001
68Pages

{{requestButtons}}

Catalog excerpts

E-HOEV-MC001 - 1

Everflex® PTFE Hose Marketing Catalog When Rubber Hose is Not Enough

Open the catalog to page 1
E-HOEV-MC001 - 2

Application Data Smooth Bore PTFE Hose Convoluted Hose Assembly Equipment & Procedures Chemical Resistance Chart Claim Information EATON Everflex PTFE Hose Catalog E-HOEV-MC001-E3 April 2011

Open the catalog to page 2
E-HOEV-MC001 - 3

Application Data Important Safety Information READ THIS INFORMATION BEFORE USINGTHIS This catalog is intended as a guide in selecting the proper hose and fittings for the applications listed herein. It contains cautions, warnings, guidelines and directions for the safe and prop- er use of Everflex hose. All these directions and footnotes should be read and understood before specifying or using any of these hoses. Symbols, boxes, boldface type, etc. are used to call attention to these instructions. Be sure to read and understand them before proceeding further with this information. This...

Open the catalog to page 3
E-HOEV-MC001 - 4

Application Data Important Safety Information Make Your Selection With • Be sure to select a hose identified as steam hose • You must identify the type of service the steam hose where the hose will be that spillage, or accumu- based materials exter- nally, can have a deterio- hose cover. Make Sure the Hose is Installed Properly • Avoid extreme flexing of line connection with the • Installing and using a shut- hose will maximize service life and operator safety. We consider such a valve mandatory for safe opera- acute flexing encountered in heavy manual handling • Provide a suitable means of...

Open the catalog to page 4
E-HOEV-MC001 - 5

Application Data Steam Temperatures Temperatures of Saturated Steam at Various Pressures WARNING Steam heat is hotter than 212° F (boiling water) and increases in temperature as pressure increases. See safety information on page 4. EATON Everflex PTFE Hose Catalog E-HOEV-MC001-E3 April 2011

Open the catalog to page 5
E-HOEV-MC001 - 6

Application Data PTFE hose has excellent temperature characteristics. It works well in high ambi- equally well in cryogenic PTFE hose has a broad range of chemical resist- ance. It is inert to most commercial chemicals, acids, alcohols, coolants, pounds, solvents, vinyls, hydraulic fluids. Chemical PTFE hose withstands con- tinuous flexing, vibration, or PTFE hose is compatible with steam. It absorbs no easy to clean and sterilize. PTFE hose is non-contami- nating. Conveyed materials, fluids, or gases will not con- PTFE hose used in cold and PTFE hose has high flow friction with anti-stick...

Open the catalog to page 6
E-HOEV-MC001 - 7

Application Data Hose Ordering Instructions and Hose Packaging Specifications a. For bulk hose in random lengths, state quantity in lengths of hose, state num- c. Eaton reserves the right mum reel length quantity or bulk quantity ordered. 2. Specify part number: a. For bulk hose, state hose style number and dash size. hose style number and dash size plus length to the near- 10 pieces S-12 hose, length of each piece 12-5/8 inches (the fifth digit of the length designator represents 3. Bulk PTFE hose is sup- length patterns: long lengths, please con- sult your Everflex product line source for...

Open the catalog to page 7
E-HOEV-MC001 - 8

Application Data Hose Length Information Average Length Patterns ¡¡¡art. Minimum *verage Maximum 3 3 Number Length Length Length Feet Feet Feet EATON Everflex PTFE Hose Catalog E-HOEV-MC001-E3 April 2011

Open the catalog to page 8
E-HOEV-MC001 - 9

Smooth Bore PTFE Hose Everflex Smooth Bore PTFE hose is specified in many of the most difficult applications in indus- try. The extruded tube has excellent flex life, high temperature resistance and chemical resist- ance. Additionally, since PTFE is steam compati- ble and non-adhesive, Everflex hose is an excel- lent choice in applications requiring steam cleaning of an assembly or transfer of a highly viscous media, such as adhesives, paints or food products.The 304 stainless steel wire reinforce- ment/cover provides the strength necessary to carry the working pressure and the durability...

Open the catalog to page 9
E-HOEV-MC001 - 10

Smooth Bore PTFE Hose Smooth Bore "B" Series Everflex B Series is rein- forced with bronze wire. All sizes have a minimum of 0.040" thick extended virgin Everflex B Series hose has traditionally been used in high vibration environments. Wall Working Thickness Pressure Pressure Bend Hose Temperature range: Stainless Steel Temperature range: Everflex STW Series tube reinforced with 304 stain- less steel wire. STW hose is where competitors' thin wall stituted. Radius in inches to inside bend. Multiply bend Actual Ave. Wall Working Catalog I.D. O.D. Thickness Pressure Pressure Bend Service Hose...

Open the catalog to page 10
E-HOEV-MC001 - 11

Smooth Bore PTFE Hose Stainless Steel with Nomex Tracer yarn Temperature range: tively-priced, smooth bore PTFE hose reinforced with 304 stainless steel wire. PTFE product that incorpo- rates a red Nomex** Tracer yarn in the stainless steel outer braid. Actual Ave. Wall Working Min. Catalog I.D. O.D. Thickness Pressure Bend Field Attachable, Field Attachable, Field Attachable, Field Attachable Field Attachable Field Attachable Field Attachable Smooth Bore "S-3" Series PTFE hose which can be hydraulic brake line applica- protect motorcycle paint jobs or provide durability in Pressure Bend...

Open the catalog to page 11
E-HOEV-MC001 - 12

Smooth Bore PTFE Hose Smooth Bore Braid: Stainless Steel Temperature range: Smooth Bore "SCTW" Series** Stainless Steel Temperature range: Carbon black used meets the requirements SC Series hose is identical internal conductive static dissipating tube that SCTW Series hose is identi- one exception. SCTW hose static dissipating tube that provides a path to the hose where flow induced electro- static charges can occur. Radius in inches to inside provides a path to the hose where flow induced occur. Radius in inches to bend. Multiply bend radius inside bend. Multiply bend Actual Ave. Wall...

Open the catalog to page 12
E-HOEV-MC001 - 13

Hi-PSI Series hose is a allowing for better hose heavy wall PTFE hose for flexibility. very high pressure applica- Actual Ave. Working Working Min. Burst Min. Catalog I.D. O.D. Pressure Pressure Pressure Bend Hoses must be assembled by Eaton. Standard Stainless Steel JIC fittings are available. Maximum assembly length is 25 feet in sizes -12 and above. In sizes -4 thru -10, assembly lenths can exceed 25 feet. Hose/Tube Insert Collar Female JIC Hose Assembly Size Part Number Part Number Thread Size Part Number EATON Everflex PTFE Hose Catalog E-HOEV-MC001-E3 April 2011

Open the catalog to page 13

All Eaton Hydraulics catalogs and technical brochures

  1. W Series

    80 Pages

  2. GD5-Series

    24 Pages

  3. KBCG-6-1

    16 Pages

  4. KBCG-3-1*

    16 Pages

  5. Coils

    14 Pages

  6. Eaton HP50

    4 Pages

  7. E-HOEV

    2 Pages

  8. EH066

    2 Pages

  9. A-HC

    8 Pages

  10. 509200

    4 Pages

  11. E-HOBV

    2 Pages

  12. A-HOAK

    69 Pages

  13. et3000

    19 Pages

  14. ttc

    28 Pages

  15. ETRLD

    20 Pages

  16. x505901

    21 Pages

  17. 509400

    8 Pages

  18. v fifi

    36 Pages

  19. i730

    8 Pages

  20. C001

    23 Pages

  21. XQ5

    20 Pages

  22. E2

    21 Pages

  23. E1

    19 Pages

  24. 1E

    2 Pages

  25. DP

    12 Pages

  26. DBA

    4 Pages

Archived catalogs