Catalogs >
Eaton Hydraulics >
DG3V-3, DG4VP-3 Segment F

DG3V-3, DG4VP-3 Segment F
10Pages

Catalog excerpts

Powering Business Worldwide

Solenoid Operated Poppet-Type Directional Valve CVUA-6-PD Cartridge Model DG3/4VP-3 Gasket Mounted Model General description Solenoid operated poppet valves are used mainly for starting, stopping and controlling the direction of linear and rotary actuators or for use as a pilot valve. The gasket mounted types can also be used for controlling the pilot functions of cartridge valves to ISO 7368 (DIN 24342) (see catalog 2378). Zero internal leakage in closed position Fast consistent response times Cost-efficient high pressure capability Simple assembly and installation All valves are of a...

Open the catalog to page 2

Model Codes For CVUA Cartridge Valves 1 Prefix, fluid compatibility Blank – For petroleum oils, water glycols and invert emulsions F3 – For phosphate esters, petroleum oils, water glycols and invert emulsions 2 Function 3 – Three-way 4 – Four-way 3 Spool and spring arrangement 102A – Normally open, spring offset; option for DG3VP models 103A – Normally closed, spring offset; option for DG3VP models 104C – Normally open, spring centered; option for DG4VP models 105C – Normally closed, spring centered; option for DG4VP models 4 Mounting flange type N – Narrow thickness flange W – Wide...

Open the catalog to page 3

Functional Symbols Spool Options Dimensions" section. For Tool Kits for CVUA Valves Note: CVUA valves are supplied See "Installation complete with mounting flanges and Dimensions" section. metric fixing bolts. ▲ This spool position is achieved only when both solenoids are energized Note: ^ No leakage in either direction Through flow in both directions Operating Data Pressure and Flow Limits Maximum Flow 20 L/min (5.3 Usgpm] Power Consumption (AC Solenoid) Response Times * In pure switched circuit conditions devoid of the effects of any suppression diodes and full wave rectifiers Power...

Open the catalog to page 4

Performance Data Typical with mineral oil at 36 cSt (168.6 SUS) and a specific gravity of 0.87. Maximum flow rates Performance based on full power solenoid coils warm and operating at 90% rated voltage. Pressure Drop Data Typical with hydraulic petroleum oil at 36 cSt (170 SUS) and at 500C (1220F) CVUA-6-PD*-2 Models Pressure drop Pressure drop

Open the catalog to page 5

Installation Dimensions 3rd angle projection Electrical plug to ISO 4400 (DIN 43650) Color: gray, marked “A”, Eaton part number 710776. Order separately by part number, if required. 150 (5.9) for removal of coil or complete valve  May vary depending on plug source. Recess Dimensions Notes (metric dimensions) Notes (inch dimensions)  Ø18 +0/–0,2 x 26 ± 0,1 deep: Ream Ø18 H7 x 20 deep min.   Diameter 0.709 +0/–0.008 x 1.024 ± 0.004 deep: Ream Ø18 mm H7 x 0.79 deep min.   Ø19 +0/–0,2 x 14 ± 0,1 deep: Ream Ø19 H7 x 8 deep min.   Diameter 0.748 +0/–0.008 x 0.551 ± 0.004 deep: Ream Ø19 mm...

Open the catalog to page 6

Installation Dimensions 3rd angle projection Electrical plug to ISO 4400 (DIN 43650) Color: gray, marked “A”, Eaton part number 710776. Order separately by part number, if required. 150 (5.9) for removal of coil or complete valve  May vary depending on plug source. Recess Dimensions Notes (metric dimensions) Notes (inch dimensions)  Ø17 +0/–0,2 x 34 ± 0,1 deep: Ream Ø17 H7 x 32,5 deep min.   Diameter 0.669 +0/–0.008 x 1.339 ± 0.004 deep: Ream Ø17 mm H7 x 1.28 deep min.   Ø18 +0/–0,2 x 26 ± 0,1 deep: Ream Ø18 H7 x 20 deep min.   Diameter 0.709 +0/–0.008 x 1.024 ± 0.004 deep: Ream Ø18...

Open the catalog to page 7

Installation Dimensions 3rd angle projection Double Solenoid Models, DG4VP: 256 (10.08) Single Solenoid Models, DG3VP: 163 (6.42) Manual override Manual override O-seals supplied For details of mounting interface to ISO 4401, size 03, see catalog 2425. For details of Eaton mounting bolt kits, see catalog 2314. Solenoid Coils Coil code Coil rating Tool Kits Part number Spare Parts Information The only replacement parts available for these valves are as follows: Part number For machining housing bores for: CVUA-6-PD*-2 valves . . . . . . . Kit 638692 CVUA-6-PD*-3 valves . . . . . . . Kit

Open the catalog to page 8

Electrical Plugs and Connectors Cable diameter range: Wire section range: Terminals: Type of protection: Connector can be positioned at 900 intervals on valve by re-assembling contact holder into appropriate position inside connector housing. Connectors with and without indicator lights are available (order separately): Ø6-10 mm (0.24-0.40) Ø,5-1,5 mm2 (0.0008-0.0023 in2) Screw type IEC144 class IP65, when plugs are fitted correctly to the valves with interface seals (supplied with plugs) in place. Use U12 or U11 type connectors with 12 and 24V DC coil if rectification is required.

Open the catalog to page 9

Eaton Hydraulics Business USA 14615 Lone Oak Road Eden Prairie, MN 55344 USA Tel: 952-937-9800 Fax: 952-294-7722 www.eaton.com/hydraulics © 2015 Eaton All Rights Reserved Printed in USA Document No.: E-VLVI-SS001-E1 October 2015 Eaton Hydraulics Business Europe Route de la Longeraie 7 1110 Morges Switzerland Tel: +41 (0) 21 811 4600 Fax: +41 (0) 21 811 4601 Eaton Hydraulics Group Asia Pacific Eaton Building 4 Floor, No. 3 Lane 280 Linhong Rd. Changning District Shanghai 200335 China Tel: (+86 21) 5200 0099 Fax: (+86 21) 5200 0400 th

Open the catalog to page 10