DG3VP-3, DG4VP-3, CVUA-6 20 Design Solenoid operated poppet type directional valve Powering Business Worldwide

DG3VP-3, DG4VP-3, CVUA-6 20 design Solenoid operated poppet type directional valve DG3/4VP-3 Subplate Mounted Model CVUA-6-PD- Cartridge Model Flow rating 40 l/min (11 gpm) Pressure Rating 315bar (4500 psi) Bidirectional seat-valve shut-off, direct acting Description • CVUA/DG3/4VP-3 operated directional seat valves size ISO4401 - 03. • Direct acting, pressure balanced • Gasket mounted or push-in cartridges. • Normal condition (de-energised closed), flow is shut off without leakage. • The core element operates on the tried and tested principle of the guided poppet, and the guide spool has a seal. •...

Blank Nitrile seals Function 3 Three-way Flag symbol M Electrical options and features. Coil type KUP5D3 Deutsch Connector H and G coils only Solenoid identification Blank None V Solenoid "A" is at port "A" end and / or solenoid "B" is at port "B" end independent of spool type Spool and spring arrangement 102A Normally open, spring offset, for DG3VP models 103A Normally closed, spring offset, for DG3VP models 104C Normally open, spring centered, for DG4VP models 105C Normally closed , spring centered, Other voltages on request Design number 20 series Blank Nitrile seals...

Spool options Note: CVUA valves are supplied complete with mounting flanges and metric fixing bolts. ▲ This spool position is achieved only when both solenoids are energized simultaneously and remain so. 'b No leakage in either direction $ Through flow in both directions EATON INDUSTRIAL VALVES

Performance graphs Measured with oil viscosity 33mm2/s (cSt), coil at steady-state temperature and 10 % undervoltage Measured with oil viscosity 33mm2/s (cSt), coil at steady-state temperature and 10 % undervoltage EATON INDUSTRIAL VALVES

Installation dimensions EATON INDUSTRIAL VALVES

Installation dimensions Shallow insertion model Deep insertion model Deep insertion model Shallow insertion model

Recess dimensions Recess Dimensions Notes (inch dimensions) Notes (metric dimensions) ▲ iameter 0.709 +0/–0.008 x 1.024 ± 0.004 deep: Ream Ø18 D ▲ 18 +0/–0,2 x 26 ± 0,1 deep: Ream Ø18 H7 x 20 deep min. Ø ■ Ø19 +0/–0,2 x 14 ± 0,1 deep: Ream Ø19 H7 x 8 deep min. ■ iameter 0.748 +0/–0.008 x 0.551 ± 0.004 deep: Ream Ø19 D M5 x min. depth full thread: For CVUA-6-PDN-2 models: 8 (0.32) For CVUA-6-PDW-2 models: 10 (0.4) Port 2 location options Tool kit 638692 for machining the Ø18 mm and Ø19 mm bores (and when required, the Ø26 mm bore) can be ordered if required. The kit comprises a stepped drill and...

Recess dimensions Recess Dimensions Notes (inch dimensions) Notes (metric dimensions) • Diameter 0.669 +0/–0.008 x 1.339 ± 0.004 deep: Ream Ø17 mm H7 x 1.28 deep min. ▲ Diameter 0.709 +0/–0.008 x 1.024 ± 0.004 deep: Ream Ø18 mm H7 x 0.79 deep min. ■ Diameter 0.748 +0/–0.008 x 0.551 ± 0.004 deep: Ream Ø19 • Ø17 +0/–0,2 x 34 ± 0,1 deep: Ream Ø17 H7 x 32,5 deep min. ▲ Ø18 +0/–0,2 x 26 ± 0,1 deep: Ream Ø18 H7 x 20 deep min. ■ Ø19 +0/–0,2 x 14 ± 0,1 deep: Ream Ø19 H7 x 8 deep min. M5 x min. depth full thread: For CVUA-6-PDN-3 models: 8 (0.32) For CVUA-6-PDW-3 models: 10 (0.4) Tool kit 459285 for machining...

Eaton Hydraulics Business USA 14615 Lone Oak Road Eden Prairie, MN 55344 USA Tel: 952-937-9800 Fax: 952-294-7722 www.eaton.com/hydraulics F:T»N Powering Business Worldwide © 2018 Eaton All Rights Reserved Eaton is a registered trademark. Printed in USA Publication No. E-VLVI-SS001-E3 / 6116 Al1 other trademarks are ProPerty October 2018 of their respective owners. Follow us on social media to get the latest product and support information.