CNG hose and fittings tech literature Powering Business Worldwide

Hoses 35NG High pressure CNG hose Eaton 35NG CNG hoses are designed to meet the rigorous requirements of high pressure CNG applications. A specially designed conductive layer within the hose dissipates static electricity and provides optimum performance. The black polyurethane cover provides industry leading UV resistance allowing for extended life in outdoor applications. The hose is available in single and twin line options where a vent line is necessary. Part number Hose size Burst pressure Temperature range: Agency listings: Tube: Conductive nylon core Temperature range • Dissipates static...

Hoses NG-TW series Low pressure CNG hose Eaton NG-TW CNG hoses are tailored for use in low pressure, on-vehicle CNG applications. The conductive Teflon® inner tube dissipates static electricity for safety. The stainless steel braid and polyester blended outer cover protect against both corrosion and abrasion. In addition, the polyester cover is fire retardant and adds an additional layer of protection. Part number Burst pressure Temperature range: Agency listings: Tube: Conductive Teflon inner tube • Dissipates static electricity Reinforcement: 304 stainless steel wire braid • Designed for electrically...

Fittings For 35NG Female ORS Swivel (Approved for NGV 4.2, NGV 3.1) Part number Hose size Dash size Dash size Female JIC/SAE 37° Swivel (Approved for NGV 4.2, NGV 3.1) Part number Hose size Dash size Dash size EATON CNG Hose and Fittings Tech Literature E-HOTH-TT001-E January 2016

Fittings For 35NG Male Pipe (Approved for NGV 4.2) Part number For plated steel Hose size Dash size Dash size Stand Pipe (Approved for NGV 4.2) Part number For plated steel Hose size Dash Size Dash size EATON CNG Hose and Fittings Tech Literature E-HOTH-TT001-E January 2016

Fittings For NG-TW Female For-Seal® (ORS) Swivel (Approved for NGV 3.1) Part number Dash size Dash size Female JIC/SAE 37° Swivel (Approved for NGV 3.1) Part number Dash size Dash size EATON CNG Hose and Fittings Tech Literature E-HOTH-TT001-E January 2016

JIC 37° Female Swivel, 45° Elbow EATON CNG Hose and Fittings Tech Literature E-HOTH-TT001-E January 2016

Tools and accessories For 35NG hose Swage adapter kit for FT1380, ET1280, ET4020 Part no.: FF16423 The Synflex swage adapter kit was designed with the specific intent to allow swaging of Eaton Synflex fittings to Eaton Synflex thermoplastic hose using existing Synflex pushers and dies and an Eaton Aeroquip® FT1380 or Eaton Weatherhead® ET4020 crimp machine. The purpose of this manual is to present critical safety information, basic installation, and operating instructions for the Synflex sage adapterkit. Mark IX swager Part no.: 45J0-05600 • Fully automatic - opens dies to release completed assembly...

Tools and accessories For 35NG hose FT1258 Cut off tool Specifications Ordering instructions FT1258 bench mounted cut off tool. A bench mounted cutter for in-plant production of Thermoplastic hose assemblies and other fabric reinforced hose styles. FT1258 Cut-off tool FT1258–2–2 Blade kit Package of three replacement blades for FT1258 tool which are designed to cut all fabric reinforced whose including Kevlar.* *Kevlar is a trademark of E.I. DuPont. Twin-line hose separation tool Part no.: 4574-01000 • Designed for separating Twin-Line hose Replacement blade Part no.: 4523-04005 4574-03000-026...

Tools and accessories For 35NG hose Swaged fitting info Hose Fitting part number Insertion depth (ref) mm (inch) Swage diameter mm (inch) Bell length mm (inch) Thru hole (min) mm (inch) Required assembly components dispensing (NGV 4.2 only) Conductive media part number Spring guard part number Spring guard retainer Warning tag part number Metal hose tag part number Required assembly components vehicle (NGV 3.1 only) Conductive media part number Metal hose tag part numbers EATON CNG Hose and Fittings Tech Literature E-HOTH-TT001-E Jan

Tools and accessories For NG-TW hose Coll-o-crimp tooling Hose Fitting part number Crimp dies Spacer ring Variable crimp machines Hose Fitting part number Required assembly components Crimp dies Metal hose tag part numbers EATON CNG Hose and Fittings Tech Literature E-HOTH-TT001-E January 2016

Eaton Hydraulics Group USA 14615 Lone Oak Road Eden Prairie, MN 55344 USA Tel: 952-937-9800 Fax: 952-294-7722 www.eaton.com/hydraulics © 2016 Eaton All Rights Reserved Printed in USA Document No. E-HOTH-TT001-E January 2016 Eaton Hydraulics Group Europe Route de la Longeraie 7 1110 Morges Switzerland Tel: +41 (0) 21 811 4600 Fax: +41 (0) 21 811 4601 Eaton Hydraulics Group Asia Pacific Eaton Building No.7 Lane 280 Linhong Road Changning District, Shanghai 200335 China Tel: (+86 21) 5200 0099 Fax: (+86 21) 2230 7240