Cutler-Hammer
12Pages

Catalog excerpts

EG-Frame Circuit Breaker 15 – 160 Amperes Effective October 2006 Supersedes MZ01202001E, dated March 2002 All Eaton’s Cutler-Hammerா EG-Frame circuit breakers are HACR rated. All EG-Frame thermal-magnetic circuit breakers 10 through 50 amperes are suitable for HID (high intensity discharge) use. All EG-Frame circuit breakers are suitable for reverse feed use. TABLE 1. FRAME TRIP RATINGS FRAME 160 amperes is not a ULா listed rating. IEC only.

Open the catalog to page 1

TABLE 2. UL 489/IEC 60947-2 INTERRUPTING CAPACITY RATINGS INTERRUPTING CAPACITY (SYMMETRICAL AMPERES) VOLTS DC ᕄ VOLTS AC (50/60 HZ) CIRCUIT BREAKER TYPE 220 – 240 NUMBER TYPE OF POLES OF TRIP T/M is thermal-magnetic N.I.T. is non-interchangeable trip unit. dc ratings apply to substantially non-inductive circuits. IEC only. 2-pole circuit breaker, or two poles of 3-pole circuit breaker. Time constant is 3 milliseconds minimum at 10 kA and 8 milliseconds minimum at 42 kA. TABLE 3. LINE AND LOAD TERMINALS MAXIMUM BREAKER AMPERES TERMINAL BODY MATERIAL WIRE TYPE METRIC WIRE RANGE (MM2) CATALOG...

Open the catalog to page 2

FIGURE 1. 1 POLE EG-FRAME BREAKER — DIMENSIONS IN INCHES (MM) FIGURE 3. 3 POLE EG-FRAME BREAKER — DIMENSIONS IN INCHES (MM) FIGURE 2. 2 POLE EG-FRAME BREAKER — DIMENSIONS IN INCHES (MM) FIGURE 4. 4 POLE EG-FRAME BREAKER — DIMENSIONS IN INCHES (MM) Note: For curves and additional technical information, please visit our Web site at www.EatonElectrical.com. EATON CORPORATION Cutler-Hammer EG-Frame Circuit Breaker 15 — 160 Amperes Technical Data TD01202006E ©Copyright 2006

Open the catalog to page 3

Side View Front View BREAKER STATUS FIGURE 5. FRONT, SIDE, TOP AND BOTTOM VIEWS EATON CORPORATION Cutler-Hammer EG-Frame Circuit Breaker 15 — 160 Amperes Technical Data TD01202006E Effective: October 2006

Open the catalog to page 4

Side View TABLE 7. TYPE EG 2-POLE BREAKER STATUS BREAKER STATUS A From Vertical Pivot Center Line. FIGURE 6. SIDE AND BACK VIEWS EATON CORPORATION Cutler-Hammer EG-Frame Circuit Breaker 15 — 160 Amperes Technical Data TD01202006E ஽Copyright 2006

Open the catalog to page 5

Type EG 2-Pole Outline (Continued) ¬ Breaker Handle Load End FIGURE 7. FRONT CONNECTED DRILL PLAN FIGURE 8. FRONT COVER CUTOUT EATON CORPORATION Cutler-Hammer EG-Frame Circuit Breaker 15 — 160 Amperes Technical Data TD01202006E Effective: October 2006

Open the catalog to page 6

Side View Front View Line End 2.00 (50.8) 1.00 (25.4) 4X ø .168 x .188 Slot for #6 Mounting Screw .22 (5.6) Attachment Leads Side Exit Point Push to Trip Button TABLE 8. TYPE EG 3-POLE BREAKER STATUS Attachment Leads Rear Exit Points BREAKER STATUS FIGURE 9. FRONT, SIDE, TOP AND BOTTOM VIEWS EATON CORPORATION Cutler-Hammer EG-Frame Circuit Breaker 15 — 160 Amperes Technical Data TD01202006E ஽Copyright 2006

Open the catalog to page 7

Type EG 3-Pole Outline (Continued) Line End .97 (24.6) FIGURE 10. FRONT CONNECTED DRILL PLAN EATON CORPORATION Cutler-Hammer EG-Frame Circuit Breaker 15 — 160 Amperes Technical Data TD01202006E Effective: October 2006

Open the catalog to page 8

Side View Front View Line End 8X ø .348 Push to Trip Button Attachment Leads Side Exit Point 5.50 (139.7) Attachment Leads Rear Exit Points TABLE 9. TYPE EG 4-POLE BREAKER STATUS BREAKER STATUS FIGURE 11. FRONT, SIDE, TOP AND BOTTOM VIEWS EATON CORPORATION Cutler-Hammer EG-Frame Circuit Breaker 15 — 160 Amperes Technical Data TD01202006E ஽Copyright 2006

Open the catalog to page 9

Type EG 4-Pole Outline (Continued) FIGURE 12. FRONT CONNECTED DRILL PLAN JL is a registered trademark of Underwriters Laboratories Inc EATON CORPORATION Cutler-Hammer EG Frame Circuit Breaker 15—160 Amperes Technical Data TD01202006E Effective: October 2006

Open the catalog to page 10