Catalogs >
Eaton Count Control Products >
C30CN 30 A lighting contactor—electrically held and mechanically held

C30CN 30 A lighting contactor—electrically held and mechanically held
2Pages

Catalog excerpts

C30CN 30 A lighting contactor—electrically held and mechanically held - 1

C30CN 30 A lighting contactor—electrically held and mechanically held Versatility, simplicity and performance The C30CN is the right solution for effectively controlling tungsten (incandescent filament), ballast (fluorescent and mercury arc), high intensity discharge (HID) and non-motor AC resistive loads. The C30CN has a revolutionary design and rugged construction, and is available with an expansive feature set. Simple power pole mounting onto base NO or NC power pole easily determined by left or right positioning Additional poles, either NO or NC, may be added easily at any time Low input VA permits long wire runs Comes in a wide range of input voltages and with coils from 24 Vac to 277 Vac, and 12 Vdc to 24 Vdc Open and enclosed offerings Mechanically held (C30CNM) and electrically held (C30CNE) options Coils, power poles, control modules and auxiliary contacts available as replacement options and accessories Quiet operation—no coil hum Convenient Side Access for Field Power Wiring Contact Configuration Indicator Robust Pole Terminals Accept Up to Two #8 AWG Wires Power Poles are Available as Single or Double Poles, Creating 74 Different Circuit Combinations Industrial plants Contact Position Indication—When Button Protrudes, Contact is Closed Office buildings Eaton’s C30CN lighting contactor delivers unprecedented versatility in application, simplicity in configuration and performance in operation. Its low magnetic noise makes it ideal for applications where quiet, energyefficient operation is required. The C30CN is perfect for critical applications. UL® Listed File E1491, UL Category Code/ Guide NLDX/NLDX7 Designed and built to NEMA® ICS-2 standards Enclosed Contacts Resist Contaminants for Greater Reliability Common, Easily Installed Power Poles Change from NO to NC (or Vice Versa) by Simply Unlatching and Rotating 180° Power Poles Rated for a Range of Tasks: • 30 A Rated Contacts • 15 A Motor Rated • Pilot Duty Rated Auxiliary Contacts, Rated A600, are Suitable for Use on Low-Level Circuits Down to 12 V, 5 mA Fast, Sure Three-Point Mounting Plug-In Auxiliary Contacts are NC when Installed on the Right Side of the Base, NO on the Left

Open the catalog to page 1

C30CN 30 A lighting contactor—electrically held and mechanically held - 2

Mechanically held contactor Technical data and specifications The C30CNM has a mechanically held operation that will not switch to an OFF position during power failure. Its mechanical latch, with a two- or three-wire electronic control module, delivers reliable performance and protection for lighting control needs. Maximum AC Voltage and Ampere Ratings Electrically held contactor The C30CNE electrically held base contactor contains a 2NO power pole as standard and will allow the addition of power poles up to 12 poles maximum. A mechanically held module kit can also be added to convert the...

Open the catalog to page 2